Search

This vintage book contains a detailed guide to the various methods employed in the area measurement of leather. Although old, much of the information contained within this volume is timeless and will be of considerable utility to modern leather workers.'Technologic Papers of the Bureau of Standards No. 153 - Area Measurement of Leather'is highly recommended for those with an interest in the history and development of the leather working industry and would make for a worthy addition to collections of allied literature. Contents include:'Importance of the Subject','Types of Area-measuring Machines used in the Leather Trade','The Pin Machine','Principles of Operation','Typical Designs','Chain and Lever Totalizing Gear','Differential Gear Totalizing System','Sources and Determination of Errors','Spacing of Wheels','Width of Rim', et cetera. Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on leather crafting.

This book gathers the latest advances, innovations, and applications in the field of multibody and mechatronic systems. Topics addressed include the analysis and synthesis of mechanisms; dynamics of multibody systems; design algorithms for mechatronic systems; robots and micromachines; experimental validations; theory of mechatronic simulation; mechatronic systems for rehabilitation and assistive technologies; mechatronic systems for energy harvesting; virtual reality integration in multibody and mechatronic systems; multibody design in robotic systems; and control of mechatronic systems. The contents reflect the outcomes of the 7th International Symposium on Multibody Systems and Mechatronics (7th MuSMe) in 2020, within the framework of the FEIbIM Commission for Robotics and Mechanisms and IFToMM Technical Committees for Multibody Dynamics and for Robotics and Mechatronics.

In a world suffering from an ageing population and declining birth rate, service robotics and mechatronics have an increasingly vital role to play in maintaining a safe and sustainable environment for everyone. Mechatronics can be used in the reconstruction or restoration of various environments which we rely upon to survive; for example the reconstruction of a city after an earthquake, or the restoration of polluted waters This collection of papers was originally presented at the 7th International Conference on Machine Automation, 2008, in Awaji, Japan, and covers a variety of new trends in service robotics and mechatronics. Service Robotics and Mechatronics showcases the latest research in the area to provide researchers and scientists with an up-to-date source of knowledge and basis for further study, as well as offering graduate students valuable reference material.

Recent Developments of Electrical Drives is composed of the papers which cover a wide spectrum of theory and practice, thus they are deeply rooted in engineering problems, being simultaneously of high theoretical level. This way the contents touches the heart of the matter in electrical drives (theory, control systems and applications). The book, stating the recent developments of electrical drives, can be useful for engineers and researchers investigating and designing electrical and electronic devices as well as for students and young researchers dealing with electrical and electronic engineering, computer sciences (advanced computer modelling, sophisticated control systems with artificial intelligence tools applied, optimal design bye use of classical and genetic algorithms employed), applied mathematics and all the topics where electromagnetic, thermal, mechanical phenomena occur. Recent Developments of Electrical Drives covers a wide range of interests of industry engineers, and scientists involved in modelling, control, measurements, new motor structures design, and could be also useful for engineers working in the field of electrical drives implementation.

This book presents selected contributions covering various scientific and technological areas by AITeM (Italian Manufacturing Association). The first part,'AITeM Young Researcher Award 2023,'written by young AITeM associates, reflects the multifaceted nature of manufacturing research. It explores emerging technologies and interdisciplinary connections to go beyond product fabrication, developing a complex value creation ecosystem for high-value-added global competition. Topics include additive manufacturing, materials processing technology, assembly, disassembly, circular economy, manufacturing systems design and management, quality engineering, production metrology, process and system simulation, optimization, and digital manufacturing. The second part,'White Papers,'features five contributions on emerging trends in manufacturing. These papers are prepared by Working Groups focusing on strategic research topics in the manufacturing sector, including metallic prostheticimplants, lasers in electric mobility, digital twins, naval and marine applications, and surface functionalization in biomedical implants. These papers provide an overview of challenges in these frontier areas, highlighting the need for a multidisciplinary and innovative approach from the community to successfully address them.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations, robotics and aircraft dynamics. The book comprises selected papers presented at the 12th conference “Modern Mechanical Engineering: Science and Education”, held at the Saint Petersburg State Polytechnic University in June 2023 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book is of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 11th conference “Modern Engineering: Science and Education”, held at the Saint Petersburg State Polytechnic University in June 2022 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book is of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 7th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2021. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Master's Thesis from the year 2021 in the subject Engineering - Mechanical Engineering, grade: 3.6, Nanjing University of Science and Technology (Mechanical Engineering), course: Additive Manufacturing & 3D Printing, language: English, abstract: This paper applies the 3D printing industry to the cloud manufacturing model and takes as its research goal the collaborative design and manufacturing paradigm in the intelligent platform of additive manufacturing. The system design and key technologies of the additive manufacturing intelligent cloud platform are systematically analyzed on the basis of the cloud manufacturing concept. A prototype device has been developed. The paper's key primary research is as follows: Combined with the concept and context of cloud 3D manufacturing, the research status of cloud manufacturing was analyzed, the description and benefits of cloud manufacturing were systematically summarized, the general structure of 3D printing cloud platform services was developed, and the module functions, application methods, and operating mechanisms were introduced. An eight-layer architecture of the cloud platform is proposed based on the functional framework of the 3D printing cloud platform. Several key modules of the online cloud platform are analyzed and clarified, and through a comparative comparison with the conventional 3D printing network platform, the benefits of the 3D printing cloud platform are examined. The 3D printing cloud platform development environment was created, the prototype system data sheet was designed, and the prototype system of the 3D printing cloud platform was developed. The prototype system's key functional modules are evaluated, and the prototype system's functional pages are explained. VIII Finally, the study findings of this article are summarized, and further study work is suggested. 3D printing, as an important part of advanced manufacturing technology, will compensate for the manufacturing needs of complex components in many industries and fulfill the rising customized manufacturing needs of people. The growth of the domestic 3D printing industry is relatively slow due to the lack of a robust service model. Cloud manufacturing is a modern paradigm of intelligent, effective and service-oriented production that has been proposed in recent years.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineeringdisciplines, and engineering graduates.

This book presents selected papers from the 6th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2020), held virtually via Google Meet. It highlights the latest advances in the emerging area, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Joining technologies could be changed to manufacturing technologies. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineeringdisciplines, and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering is discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 10th conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in June 2021 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book presents selected papers from the 5th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2019), held in Kuala Lumpur, Malaysia. It highlights the latest advances in the area, brings together researchers and professionals in the field and provides a valuable platform for exchanging ideas and fostering collaboration. Joining technologies could be change to manufacturing technologies. Addressing real-world problems concerning joining technologies that are at the heart of various manufacturing sectors, the respective papers present the outcomes of the latest experimental and numerical work on problems in soldering, arc welding and solid-state joining technologies.technologies.technologies.technologies.technologies.technologies.technologies.technologies.technologies.technologies.technologies.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 8th conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in May 2019 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book contains the papers of the 7th International Workshop on Medical and Service Robots (MESROB) that was planned to be held in Basel, Switzerland, in July 2020. Since the conference could not be held due to the worldwide Corona pandemic, the proceedings are published in this book and presentation of the accepted papers will be postponed to next year's conference (MESROB 2021). The main topics of the workshop include: design of medical devices, kinematics and dynamics for medical robotics, exoskeletons and prostheses, anthropomorphic hands, therapeutic robots and rehabilitation, cognitive robots, humanoid and service robots, assistive robots and elderly assistance, surgical robots, human-robot interfaces, haptic devices, medical treatments, medical lasers, and surgical planning and navigation. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists, demonstrating that medical and service robotics will drive the technological and societal change in the coming decades.

Master's Thesis from the year 2004 in the subject Engineering - Mechanical Engineering, grade: 4.00, Texas A&M University, language: English, abstract: The paper formulated a novel algorithm for making the combination of outputs in the output zero direction of the plant always equal to zero. Using this algorithm and the result of MacFarlane and Karcanias, a fault detection scheme was proposed which utilizes the directional property of the multivariable linear system. The fault detection scheme is applicable to linear multivariable systems. Results were obtained for both continuous and discrete linear multivariable systems. The results were further verified by the steady state analysis of the plant. Recently fault detection and isolation of non-linear system have generated a lot of interest. The present paper deals with only linear systems there is scope of extending this work to the non-linear systems. There is a possibility of using the properties of non-linear zeros to detect and isolate faults present in a non-linear plant.

This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 7th conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in May 2018 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 4th International Conference on Industrial Engineering (ICIE), held in Moscow, Russia in May 2018. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 6th conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in June 2017 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

The papers in this volume present and discuss the frontiers in the mechanics of controlled machines and structures. They are based on papers presented at the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines held in Vienna in September 2015. The workshop continues a series of international workshops held in Linz (2008) and St. Petersburg (2010).

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in 2016 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This book presents the most recent advances in the research and applications of reconfigurable mechanisms and robots. It collects 93 independently reviewed papers presented at the Third ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2015) held in Beijing, China, 20-22 July 2015. The conference papers are organized into seven parts to cover the reconfiguration theory, topology, kinematics and design of reconfigurable mechanisms including reconfigurable parallel mechanisms. The most recent results on reconfigurable robots are presented including their analysis, design, simulation and control. Bio-inspired mechanisms are also explored in the challenging fields of rehabilitation and minimally invasive surgery. This book further addresses deployable mechanisms and origami-inspired mechanisms and showcases a wide range of successful applications of reconfigurable mechanisms and robots. Advances in Reconfigurable Mechanisms and Robots II should be of interest for researchers, engineers and postgraduate students in mechanical engineering, electrical engineering, computer science and mathematics.

This text is an advancement of the theory of vibration protection of mechanical systems with lumped and distributed parameters. The book offers various concepts and methods of solving vibration protection problems, discusses the advantages and disadvantages of different methods, and the fields of their effective applications. Fundamental approaches of vibration protection, which are considered in this book, are the passive, parametric and optimal active vibration protection. The passive vibration protection is based on vibration isolation, vibration damping and dynamic absorbers. Parametric vibration protection theory is based on the Shchipanov-Luzin invariance principle. Optimal active vibration protection theory is based on the Pontryagin principle and the Krein moment method.The book also contains special topics such as suppression of vibrations at the source of their occurrence and the harmful influence of vibrations on humans.< Numerous examples, which illustrate the theoretical ideas of each chapter, are included.This book is intended for graduate students and engineers. It is assumed that a reader has working knowledge of theory of vibrations, differential equations, andcomplex analysis.About the Authors.Igor A Karnovsky, Ph.D., Dr. Sci., is a specialist in structural analysis, theory of vibration and optimal control of vibration. He has 40 years of experience in research, teaching and consulting in this field, and is the author of more than 70 published scientific papers, including two books in Structural Analysis (published with Springer in 2010-2012) and three handbooks in Structural Dynamics (published with McGraw Hill in 2001-2004). He also holds a number of vibration-control-related patents.Evgeniy Lebed, Ph.D., is a specialist in applied mathematics and engineering. He has 10 years of experience inresearch, teaching and consulting in this field. The main sphere of his research interests are qualitative theory of differential equations, integral transforms and frequency-domain analysis with application to image and signal processing. He is the author of 15 published scientific papers and a US patent (2015).

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in 2014 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”, held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Hydraulic machinery such as turbines and pumps is widely used around the world. Related topics concerning design, operation and maintenance are of relevant interest. In this context, cavitation is a phenomenon to be taken into account, and this was treated in the XVIII IAHR Symposium on Hydraulic Machinery and Cavitation which took place in Valencia, Spain, 16th-19th September, 1996 and which was hosted by the Polytechnic University of Valencia. The proceedings of the Symposium have been published in two volumes. In this first volume, the papers included cover the following topics: Hydraulic Turbines, Analysis and Design Hydraulic Pumps Hydraulic Elements, Dynamic Characterization and Hydraulic Behaviour Cavitation and Sand Erosion In the second volume, the papers included cover the following topics: Hydraulic Transients and Control Systems Related to Hydraulic Machinery and Plants Oscillatory and Vibration Problems in Hydraulic Machinery and Power Stations Experimental Investigations related to Hydraulic Machinery and its Applications Practical Applications of the Hydraulic Machinery Monitoring, Predictive Maintenance and Refurbishment The 119 papers presented at the Symposium, from research groups, consulting companies and manufacturers, constitute an important collection for investigators, engineers and technicians who are interested in updated information on hydraulic machinery. This book is intended to be a reference text comprising the latest innovations on this subject.

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference'Modern Engineering: Science and Education', held at the Saint Petersburg State Polytechnic University in 2013 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

This edited volume includes all papers presented at the 22nd International Conference on Mine Planning and Equipment Selection (MPES), Dresden, Germany, 2013. Mineral Resources are needed for almost all processes of modern life, whilst the mining industry is facing strict requirements regarding efficiency and sustainability. The research papers in this volume deal with the latest developments and research results in the fields of mining, machinery, automatization and environment protection.

Presented here are 73 refereed papers given at the 34th MATADOR Conference held at UMIST in July 2004. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The 34th proceedings contains original papers contributed by researchers from many countries on different continents. The papers cover both the technological aspect of manufacturing processes; and the systems, business and management features of manufacturing enterprise. The papers in this volume reflect: - the importance of manufacturing to international wealth creation; - the necessity of responsiveness and agility of manufacturing companies to meet market-led requirements and international change; - the role of information technology and electronic communications in the growth of global manufacturing enterprises; - the impact of new technologies, new materials and processes, on the ability to produce goods of higher quality, more quickly, to meet markets needs at a lower cost. Some of the major generic developments which have taken place in these areas since the 33rd MATADOR conference was held in 2000 are reported in this volume.

The International Union of Theoretical and Applied Mechanics (IUTAM) initiated and sponsored an International Symposium on Nonlinear Dynamics in Engineering Systems held in 1989 in Stuttgart, FRG. The Symposium was intended to bring together scientists working in different fields of dynamics to exchange ideas and to discuss new trends with special emphasis on nonlinear dynamics in engineering systems. A Scientific Committee was appointed by the Bureau of IUTAM with the following members: S. Arimoto (Japan), F.L. Chernousko (USSR), P.J. Holmes (USA), C.S. Hsu (USA), G. looss (France), F.C. Moon (USA), W. Schiehlen (FRG), Chairman, G. Schmidt (GDR), W. Szemplinska-Stupnicka (Poland), J.M.T. Thompson (UK), H. Troger (Austria). This committee selected the participants to be invited and the papers to be presented at the Symposium. As a result of this procedure 78 active scientific participants from 22 countries followed the invitation, and 44 papers were presented in lecture and poster sessions. They are collected in this volume. At the Symposium an exhibition with experiments took place and the movie'An Introduction to the Analysis of Chaotic Dynamics'by E.J. Kreuzer et.al. was presented. The scientific lectures were devoted to the following topics: o Dynamic Structural Engineering Problems, o Analysis of Nonlinear Dynamic Systems, o Bifurcation Problems, o Chaotic Dynamics and Control Problems, o Miscellaneous Problems, o Experimental and Theoretical Investigations, o Chaotic Oscillations of Engineering Systems, o Characterization of Nonlinear Dynamic Systems, o Nonlinear Stochastic Systems.

This book presents the papers from the latest international conference, following on from the highly successful previous conferences in this series held regularly since 1978. Papers cover all current and novel aspects of turbocharging systems design for boosting solutions for engine downsizing. The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles. Novel boosting solutions for diesel engines operating in the industrial and marine market sectors are also included.The current emission legislations and environmental trends for reducing CO2 and fuel consumption are the major market forces in the transport (land and marine) and industry sectors. In these market sectors the internal combustion engine is the key product where downsizing is the driver for development for both SI and CI engines in the passenger car and commercial vehicle applications. The more stringent future market forces and environmental considerations mean more stringent engine downsizing, thus, novel systems are required to provide boosting solutions including hybrid, electric-motor and exhaust waste energy recovery systems for high efficiency, response, reliability, durability and compactness etc. For large engines the big challenge is to enhance the high specific power and efficiency whilst reducing emission levels (Nox and Sox) with variable quality fuels. This will require turbocharging systems for very high boost pressure, efficiency and a high degree of system flexibility. - Presents papers from all the latest international conference - Papers cover all aspects of the turbocharging systems design for boosting solutions for engine downsizing - The focus of the papers is on the application of turbocharger and other pressure charging devices to spark ignition (SI) and compression ignition (CI) engines in the passenger car and commercial vehicles

This book presents the papers from the 10th International Conference on Vibrations in Rotating Machinery. This conference, first held in 1976, has defined and redefined the state-of-the-art in the many aspects of vibration encountered in rotating machinery. Distinguished by an excellent mix of industrial and academic participation achieved, these papers present the latest methods of theoretical, experimental and computational rotordynamics, alongside the current issues of concern in the further development of rotating machines. Topics are aimed at propelling forward the standards of excellence in the design and operation of rotating machines. - Presents latest methods of theoretical, experimental and computational rotordynamics - Covers current issues of concern in the further development of rotating machines

Condition monitoring of machines in non-stationary operations (CMMNO) can be seen as the major challenge for research in the field of machinery diagnostics. Condition monitoring of machines in non-stationary operations is the title of the presented book and the title of the Conference held in Hammamet - Tunisia March 26 – 28, 2012. It is the second conference under this title, first took place in Wroclaw - Poland, March 2011.The subject CMMNO comes directly from industry needs and observation of real objects. Most monitored and diagnosed objects used in industry works in non-stationary operations condition. The non-stationary operations come from fulfillment of machinery tasks, for which they are designed for. All machinery used in different kind of mines, transport systems, vehicles like: cars, buses etc, helicopters, ships and battleships and so on work in non-stationary operations.The papers included in the book are shaped by the organizing board of the conference and authors of the papers.The papers are divided into five sections, namely:Condition monitoring of machines in non-stationary operationsModeling of dynamics and fault in systemsSignal processing and Pattern recognitionMonitoring and diagnosticsystems Noise and vibration of machinesThe presented book gives the back ground to the main objective of the CMMNO 2012 conference that is to bring together scientific community to discuss the major advances in the field of machinery condition monitoring in non-stationary conditions.

This volume comprises the papers from 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011). 2011 International Conference on Information Technology and Agricultural Engineering (ICITAE 2011) has been held in Sanya, China, December 1-2, 2011. All the papers have been peer reviewed by the selected experts. These papers represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technologies and applications. Specially, these papers cover the topics of Information Technology and Agricultural Engineering. This book provides a greatly valuable reference for researchers in the field of Information Technology and Agricultural Engineering who wish to further understand the underlying mechanisms and create innovative and practical techniques, systems and processes. It should also be particularly useful for engineers in information technology and agriculture who are responsible for the efficient and effective operations.

This volume contains papers presented at the 11th International Conference on Jet Cutting Technology, held at St. Andrews, Scotland, on 8-10 September 1992. Jetting techniques have been successfully applied for many years in the field of cleaning and descaling. Today, however, jet cutting is used in operations as diverse as removing cancerous growths from the human body, decommissioning sunsea installations and disabling explosive munitions. The diversity is reflected in the papers presented at the conference. The papers were divided into several main sections: jetting basics -- materials; jetting basics -- fluid mechanics; mining and quarrying; civil engineering; new developments; petrochem; cleaning and surface treatment; and manufacturing. The high quality of papers presented at the conference has further reinforced its position as the premier event in the field. The volume will be of interest to researchers, developers and manufacturers of systems, equipment users and contractors.

These volumes contain the contributions to the Second European Conference on Unsaturated Soils, E-UNSAT 2012, held in Napoli, Italy, in June 2012. The event is the second of a series of European conferences, and follows the first successful one, organised in Durham, UK, in 2008. The conference series is supported by Technical Committee 106 of the International Society of Soil Mechanics and Geotechnical Engineering on Unsaturated Soils. The published contributions were selected after a careful peer-review process. A collection of more than one hundred papers is included, addressing the three thematic areas experimental, including advances in testing techniques and soil behaviour, modelling, covering theoretical and constitutive issues together with numerical and physical modelling, and engineering, focusing on approaches, case histories and geo-environmental themes. The areas of application of the papers embrace most of the geotechnical problems related to unsaturated soils. Increasing interest in geo-environmental problems, including chemical coupling, marks new perspectives in unsaturated soil mechanics. This book will provide a valuable up-to-date reference across the subject for both researchers and practitioners.

This book contains the papers presented at the 7th International Conference on Compressors and their Systems at City University London in conjunction with the IMECHE. This conference is the ultimate global forum for reviewing the latest developments and novel approaches in compressor research. It features contributions from equipment manufacturers, suppliers, users and research organisations; these papers present developments in air, gas and refrigeration compressors; vacuum pumps; expanders; and related systems and components. Papers cover the design, development and operation of a wide range of compressors and expanders. Equipment manufacturers, suppliers, users and research organisations are all represented. Aspects covered include: present and future developments in scroll compressors; design and optimisation of screw compressors; latest thinking in oscillating and vane compressors; improving the function of valves; latest research in dynamic compressors; detailed analysis of reciprocating compressors; improved accuracy and usefulness of modelling techniques; developing better control of centrifugal compressors; and reducing unwanted noise and vibration. - Presents all the papers of the International Conference on Compressors and their Systems 2011 - Up to date papers on compressor technology improvements - The latest prediction modelling techniques are presented

This is the second volume of a series of edited books whose aim is to collect c- tributed papers within a framework that can serve as a collection of persons in MMS (Mechanism and Machine Science). This is a continuation of the first volume that was published in 2008, again combining very ancient and very recent scholars in order to give not only an encyclopaedic character to this project but also to emphasize the significance of MMS over time. This project has the characteristic that the papers illustrate, by recognizing p- sons and their scientific work, mainly technical developments in the historical evolution of the fields that today are grouped in MMS. Thus, emphasis is also given to biographical notes describing efforts and experiences of people who have c- tributed to the technical achievements whose technical survey is the core of each contributed paper. This second volume of the project has been possible thanks to the invited authors who have enthusiastically shared in this initiative and who have spent time and effort in preparing the papers. The stand-alone papers cover the wide field of the History of Mechanical Engineering with specific focus on MMS. I believe that readers will take advantage of the papers in this book and future ones by supplying further satisfaction and motivation for her or his work (historical or not).

SYROM conferences have been organized since 1973 by the Romanian branch of the International Federation for the Promotion of Mechanisms and Machine Science IFToMM, Year by year the event grew in quality. Now in its 10th edition, international visibility and recognition among the researchers active in the mechanisms science field has been achieved. SYROM 2009 brought together researchers and academic staff from the field of mechanisms and machine science from all over the world and served as a forum for presenting the achievements and most recent results in research and education. Topics treated include conceptual design, kinematics and dynamics, modeling and simulation, synthesis and optimization, command and control, current trends in education in this field, applications in high-tech products. The papers presented at this conference were subjected to a peer-review process to ensure the quality of the paper, the engineering significance, the soundness of results and the originality of the paper. The accepted papers fulfill these criteria and make the proceedings unique among the publications of this type.

The EUCOMES08, Second European Conference on Mechanism Science is the second event of a series that has been started in 2006 as a conference activity for an European community working in Mechanism Science. The?rst event was held in Obergurgl, Austria in 2006. This year EUCOMES08 Conference has come to Cassino in Italy taking place from 17 to 20 September 2008. TheaimoftheEUCOMESConference istobringtogetherEuropean researchers, industry professionals and students from the broad ranges of disciplines referring to Mechanism Science, in an intimate, collegial and stimulating environment. In this second event we have received an increased attention to the initiative, as canbeseenbythefactthattheEUCOMES08Proceedingswillcontaincontributions by authors even from all around the world. This means also that there is a really interest to have not only a conference frame but even a need of aggregation for an European Community well identi?ed in Mechanism Science with the aim to strengthen common views and collaboration activities among European researchers and institutions. I believe that a reader will take advantage of the papers in these Proceedings with further satisfaction and motivation for her or his work. These papers cover the wide?eld of the Mechanism Science. The program of EUCOMES08 Conference has included technical sessions with oral presentations, which, together with informal conversations during the social program, have enabled to offer wide opportunities to share experiences and discuss scienti?c achievements and current trends in the areas encompassed by the EUCOMES08 conference.

Collected here are 112 papers concerned with all manner of new directions in manufacturing systems given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material presented in this volume includes reports of work from both scientific and engineering standpoints and several invited and keynote papers addressing the current cutting edge and likely future trends in manufacturing systems. The book's subjects include: (1) new trends in manufacturing systems design: sustainable design, ubiquitous manufacturing, emergent synthesis, service engineering, value creation, cost engineering, human and social aspects of manufacturing, etc.; (2) new applications for manufacturing systems – medical, life-science, optics, NEMS, etc.; (3) intelligent use of advanced methods and new materials – new manufacturing process technologies, high-hardness materials, bio-medical materials, etc.; (4) integration and control for new machines – compound machine tools, rapid prototyping, printing process integration, etc.

Presented here are 88 refereed papers given at the 35th MATADOR Conference held at the National University of Taiwan in Taipei, Taiwan in July 2007. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this conference contains original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications associated with: manufacturing processes; technology; system design and integration; and computer applications and management. The papers in this volume reflect: • the importance of manufacturing in international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using additive processes; • the growing demand for precision engineering and part inspection techniques; • measurement techniques and equipment.

This is the?rst volume of a series of edited books whose aim is to collect contributed papers in a framework that can serve as a dictionary of names of individuals who have made contributions to the discipline of MMS (Me- anism and Machine Science). This dictionary project has the peculiarity that, through descriptions of the ideas and work of these individuals, the papers will illustrate mainly technical developments in the historical evolution of the individual?elds that today de?ne the scope of MMS. Thus the core of each contribution will be a survey of biographical notes describing the efforts and experiences of these people. Finding appropriate technical experts as authors for such papers and - couraging them to write them has been a challenge; it is a demanding and time-consuming effort to produce such in-depth articles that delve deeply into the historical background of their topics of expertise. This?rst volume of the dictionary project has been possible thanks to the invited authors who have enthusiastically shared the initiative and have spent time and effort in prep- ing papers that have the novel characteristics of survey and historical notes. The papers in this volume cover the wide?eld of the History of Mechanical Engineering with speci?c focus on MMS. I believe that a reader who takes advantage of the papers in this book, as well as future ones, will?nd further satisfaction and motivation for her or his work (historical or not).

This book includes selected peer-reviewed papers presented at the International Conference on Trends in Electronics and Health Informatics (TEHI 2023), held at Institute of Information Technology, Jahangirnagar University, Dhaka, Bangladesh, during December 26–27, 2023. The book is broadly divided into five sections—artificial intelligence and soft computing, healthcare informatics, Internet of things and data analytics, electronics, and communications.

This book gathers the proceedings of the 9th European Conference on Mechanism Science (EuCoMeS), which was held in Padua, Italy, on September 18–20, 2024, under the patronage of IFToMM. It presents the latest research and industrial applications in the areas of mechanism science, robotics, and dynamics. The contributions cover such topics as computational kinematics, control issues in mechanical systems, mechanisms for medical rehabilitation, mechanisms for minimally invasive techniques, cable robots, design issues for mechanisms and robots, and the teaching and history of mechanisms. Written by leading researchers and engineers and selected by means of a rigorous international peer-review process, the papers highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.