Search

Interfacial lattice mismatch and adverse reaction are the key issues hindering the development of nickel oxide (NiOx)‐based inverted perovskite solar cells (PVSCs). Herein, a p‐chlorobenzenesulfonic acid (CBSA) self‐assembled small‐molecule (SASM) is adopted to anchor NiOx and perovskite crystals to endow dual‐passivation. The chlorine terminal of SASMs can provide growth sites for perovskite, leading to interfacial strain release. Meanwhile, the sulfonic acid group from SASMs can passivate surface defects of NiOx, conducive to charge carrier extraction. In addition, the self‐assembled layer inhibits the adverse interfacial reaction by preventing NiOx contact with perovskite. Therefore, the NiOx/CBSA‐based PVSCs obtain a champion power conversion efficiency (PCE) of 21.8%. Of particular note, the unencapsulated devices can retain above 80% of their initial PCE values after storage in a nitrogen atmosphere for 3000 h, in air with a relative humidity of 50–70% for 1000 h, and heating at 85 °C for 800 h, respectively. [ABSTRACT FROM AUTHOR]

The elimination of methylammonium (MA) cation from mixed tin–lead (Sn–Pb) narrow‐bandgap (NBG) perovskites is an effective approach to enhance the operational stability of all‐perovskite tandem solar cells (TSCs). Unfortunately, the uncontrolled nucleation and crystallization processes of MA‐free Sn–Pb perovskites usually lead to inferior film quality and device performance. Herein, a bimolecular crystallization modulation strategy is reported by using guanidine thiocyanate (GuaSCN) and aminoacetamide hydrochloride (AHC) together as additives to improve the film quality of MA‐free Sn–Pb perovskites. It is demonstrated that the use of bimolecular additives can effectively improve the crystallinity, increase the grain size, and induce a preferred (100) orientation for the corresponding films, leading to high‐quality absorber with considerably reduced defect density and suppressed non‐radiative recombination. In addition, the bimolecular additives can reduce the self‐p‐doping hole concentration within the perovskite films and enhance the charge extraction at the perovskite/electron transport layer interface. The modified NBG perovskite solar cells deliver a power conversion efficiency (PCE) of 22.14%. Coupled with the wide‐bandgap (WBG) subcell, the all‐perovskite TSCs give a champion certified PCE of 27.15%, which is the highest certified PCE for MA‐free all‐perovskite TSCs. Encapsulated tandem devices maintain 90% of the initial PCE after 473 h operation. [ABSTRACT FROM AUTHOR]