Search

In today's power scenario, the increasing power demand is a prevailing concern. The electrical power generated by non-renewable energy sources falls short in meeting this escalating demand. Utilizing renewable sources in conjunction with non-renewable energy becomes imperative. Among various renewable energy sources like wind, tidal, biomass, and solar, the latter is especially advantageous due to its widespread availability and environmentally friendly nature. However, the power generated by solar cells is influenced by atmospheric conditions, and its delivery hinges on connected loads. Achieving maximum solar cell power output is challenging due to atmospheric variations, necessitating the use of various Maximum Power Point Tracking (MPPT) methods. This paper introduces the application of the Incremental Conductance (INC) method for MPPT, which, in comparison to the Perturb and Observe (P & O) method, is better suited for tackling oscillations arising from diverse atmospheric conditions. The selection of a DC-DC CUK converter holds significance for maximizing power, offering low ripple levels at both input and output stages. The paper comprehensively covers converter design, simulation outcomes for a battery-connected standalone PV system employing the INC MPPT method [ABSTRACT FROM AUTHOR]

Malaysia has targeted to achieve 40% of renewable energy (RE) by 2035. It is evident that solar energy shall contribute the largest portion of the target due to the abundant resources of solar in Malaysia. Nevertheless, Malaysia should not limit its' RE resources to only solar energy. This includes RE in the likes of wind energy. Although generally Malaysia has comparatively low annual average wind speed, numerous studies have shown that there are several areas with relatively higher annual average wind speed. These areas may potentially be considered for wind energy development. Several methodologies have been utilized by researchers to identify such areas. Several researchers opted to develop wind maps to identify the potential area in Malaysia for wind energy development. Interpolation methods such as Inverse Distance Weighted (IDW) and Kriging are commonly utilised in wind mapping studies as these methods are effective to estimate the wind speed at unmeasured area. This paper reviews the comparison between the wind speed interpolation methods which are IDW and Kriging for wind energy applications in Malaysia. Among the interpolation parameters compared include input, results and validation. The way forward proposed by this paper will aid as a reference for future advances in wind mapping in Malaysia and its surrounding region. [ABSTRACT FROM AUTHOR]

At present, some renewable energy researchers have their attention directed toward the possibilities of harnessing the tornado energy concept by creating an artificial vortex utilizing solar energy for electrical power generation. Given this concept trend, a new Solar Vortex Engine (SVE) was proposed, designed, and simulate at the University of Technology – Iraq (UOT). In this paper, a computational simulation was used in the ANSYS 2020 R1 program to simulate the influence of solar intensity on the vortex updraft velocity generated. Initial boundary parameters have been included for SVE geometry, intake velocity, and different solar radiation (400, 700, and 1000) W/m2, while the outlet parameter is listed as a vortex updraft velocity. The CFD results and validation showed the direct effects of radiation concentration on the air velocity of the ascending vortex, which increased by 37% when the solar intensity went from 400 W/m2 to 1000 W/m2. [ABSTRACT FROM AUTHOR]

Renewable energy is an important and effective source of energy production in the present and the future because it is clean, available, and unlimited. Because of Iraq's proximity to the equator, solar energy is available in large quantities. However, due to some limitations, such as the problem of overheating the board, the energy cannot be extracted in large quantities. The current research paper deals with a biaxial solar tracking system. In February, the system was installed in Iraq, specifically in Karbala (longitude 44.0270 degrees, latitude 32.60010 degrees). The system consists of a photovoltaic panel, a battery, a controller,d two actuators. When compared to a solar panel fixed in the same location, the system generates 39.98% more electrical energy. Solar panels benefit from the low temperatures in winter and spring in the cooling of the panel, as the tracking system keeps it perpendicular to the sun's rays, which increases the temperature of the solar panel. In the summer, an adequate cooling process must be provided for the system. [ABSTRACT FROM AUTHOR]

Considering the rising cost of petroleum products and the widespread demand for clean and renewable energy to lower carbon dioxide pollution to meet global emissions targets in developed and developing countries. For this reason, alternative energy sources such as solar, wind, and thermal have become crucial. This energy must be cheaper, and safer, and contribute significantly to energy development. Nigeria is faced with the problem of poor access to power supply, which contributes to retarded industrial growth, insecurity, and mass unemployment. Alternative sources, such as solar energy, bio-energy, etc are capable of solving the energy crisis in Nigeria with average solar insolation of 7.0KWℎ∕m2 per day in the north and 3.5KWℎ∕m2 per day) in the south. Biofuels such as bioethanol and biodiesel produced from biomass are also promising alternatives. They can reduce harmful emissions and give Nigeria hope for energy security and sustainable development. This paper reviews the potential of various renewable sources for energy generation in Nigeria. Presently, Nigeria requires thermal power plants from renewable sources capable of providing 13000MW, to meet the daily energy needs in Nigeria compared to the available 4000MW which is insufficient for over two hundred (200) million Nigerians. This study identifies biofuels as a major energy innovation for car engines, gas turbines, power plants, etc. In Nigeria and throughout sub-Saharan Africa, the use of biofuels could prevent energy shortages and promote more sustainable development. Challenges to widespread biofuel adoption in developing countries include deforestation, land scarcity, and the conflict between energy production and food security. It concludes that significant spending on energy research and the right institutional and governmental frameworks are needed to overcome the difficulties in order to realize the potential of alternative energy for sustainable development [ABSTRACT FROM AUTHOR]

The reasons for pollution and the limitations of fossil fuels have driven the use of electric vehicles. Electric vehicles are synonymous with electric batteries that require periodic charging. There has been an increase in research on battery charging for electric vehicles. There is also the use of renewable energy resources such as photovoltaics for battery charging stations. This paper focuses on prototyping battery charging stations from solar photovoltaic energy using ANN-based MPPT controllers within the framework of optimizing solar energy harvesting and comparing them with conventional MPPT methods. Test results showed that the prototype of the proposed charging system took 33.3 minutes to charge a 7Ah battery. Compared to conventional MPPT methods, the charging time of MPTT methods with Neural Network is 6.01% faster. [ABSTRACT FROM AUTHOR]

The entire modern world is dependent on energy. Providing cooling with renewable energy sources, such as solar energy, is one of the primary answers to the energy and environmental issues. Phase change materials (PCMs) play a significant role in the utilisation of solar energy in cooling applications. Recent study on solar energy using PCMs for low and medium temperature cooling applications indicates that PCMs are widely employed in solar thermal cooling, transport refrigeration, and commercial food outlets. Since low-temperature PCMs can maintain the temperature of small-scale refrigerators for an extended time, it can be used to maintain the space temperature of the appliance without the use of an electrical energy storage during the night. The primary factors in adapting a conventional system to work with solar energy with PCM are performance parameters such as pull-down time and on-off cycle of the compressor. In this paper, therefore, the experimental findings for the pull-down time and on-off cycle time of a 210-liter solar refrigerator with and without a PCM are provided. The experimental data revealed that the compressor's pull-down time and off-time were raised by 78% and 6.1 times, respectively. In addition to enhancing performance and facilitating temperature maintenance within the refrigerated space, the per-day energy consumption was reduced from 14.4 to 18.5% as compared to the system without PCM. It was confirmed that the use of PCM in refrigeration systems can play an essential role in enhancing their overall performance. Furthermore, this study could serve as a key link between the PCM and all currently available small-scale solar-powered household cooling appliances. [ABSTRACT FROM AUTHOR]

In the current period, the solar energy system has become the most important source of renewable energy, such as wind, fuel cells, and others. The need for it has increased greatly, so that it is relied upon in many services, industrial and agricultural fields, etc. With the increase in demand for solar energy, it leads us to develop and increase its efficiency and improve its performance in various ways. One of these ways is the interest in the monitoring system, which has received great attention from researchers and designers recently. Wireless monitoring systems have been linked with photovoltaic systems and display them on a platform in a more clear and easy way for the user. The design and implementation of a wireless data acquisition system for a photovoltaic panel system is discussed in this paper. based on the ATmega328P microcontroller integrated with the Arduino Uno board, In the proposed monitoring system, the Bluetooth technology was relied on to receive the values of the variables or parameters to be measured by the sensors that were previously determined, namely temperature, humidity, solar radiation, voltage, current, and power, and then display the results taken on smart phones and tablets running Android operating systems using the APK application. The proposed system is characterized by its low cost, simple design, open source, real-time measurement, developable, efficient, high accuracy, reliable, and practical. [ABSTRACT FROM AUTHOR]

Recently, solar power represents one of the most stable and important renewable energy resources in our life, its importance increases every second because the planet will be run out of fossil fuel in the near future, but sometime uncertain fluctuations appear duo to rain, dust, clouds, and heat which prompts the issue of power supply interference. So that, in the traditional way, the solar panels have to be check from time to another to figure out if they still work correctly, and that could make either the maintenance cost will be high, or there will be loss in the performance, that could be obvious in a solar system of large number of panels. As a result a better way to check the solar cells is needed to make the performance better, especially in case of a large number of solar panels. In this paper, a study will be made about solar system consists of an array of solar panels and photovoltaic parameter in each of them. The main purpose is building a system which works on fault detection. This study depends on Smart Monitoring Device (SMD) sensors, which connected to each PV panel. These sensors collect the measurements periodically, and send them to an IoT central server, in order to detect the faults to correct them as soon as possible and improve the efficiency of solar panels. The results showed that the AC voltage from the applying the system of Solar Voltage 1when the fault occurs as the maximum is 30.62 V and average is 17.9 V while the Solar Voltage 2 as max is 31.05 V, and average is 18.15 V. The AC power consumed per unit time (0.1 seconds is 20.573 W to 0.8 seconds is 20.592 W. [ABSTRACT FROM AUTHOR]

As part of Oman's vision 2040, electricity from renewable energy should replace 30% of the country's total power by 2030. Furthermore, the power for the electric vehicles is expected from renewable power. Recently the Oman Authority for Electricity Regulation (AER) revised the tariff system and due to this generating of energy from solar energy is becoming popular. To implement the PV technology, many challenges including cost of electricity, technological growth and policy must be addressed. Grid Connected PV (GCPV) system may be one of the options to overcome the above issues. It could decrease peak load demands, besides contributing eco-friendly power generation. This paper investigates the techno-economic and environmental aspects on implementing PV power for electrification of Suhar City which is situated in the northern part of Oman. Photovoltaic (PV) systems can be installed utilizing the available rooftop spaces in the premises and the empty land around the buildings. A 1400W PV system available in Sohar University (SU) was used to collect the required data. The system was simulated in HOMER Pro, and the major parameters needed for the proposed study were analysed. The results showed that the investment in PV system, in Sohar city can be promising. The system showed the yield factor as 1923.6 kW h/kWp/year. Moreover, the proposed system had a capacity factor of 21.7%. The cost of energy and payback period were 0.146 USD/kWh (0.056 OMR/kW h) and 4 years respectively. However, many other factors due to economic challenges, Government policies and social acceptance must be resolved to establish a viable market for PV technology in Oman. [ABSTRACT FROM AUTHOR]

As part of Oman's vision 2040, electricity from renewable energy should replace 30% of the country's total power by 2030. Furthermore, the power for electric vehicles is expected from renewable power. Recently the Oman Authority for Electricity Regulation (AER) revised the tariff system and due to this generating of energy from solar energy is becoming popular. To implement the PV technology, many challenges including cost of electricity, technological growth and policy must be addressed. Grid Connected PV (GCPV) system may be one of the options to overcome the above issues. It could decrease peak load demands, besides contributing to eco-friendly power generation. This paper investigates the techno-economic and environmental aspects on implementing PV power for electrification of Suhar City which is situated in the northern part of Oman. Photovoltaic (PV) systems can be installed utilizing the available rooftop spaces in the premises and the empty land around the buildings. A 1400W PV system available in Sohar University (SU) was used to collect the required data. The system was simulated in HOMER Pro, and the major parameters needed for the proposed study were analysed. The results showed that the investment in PV system, in Sohar city can be promising. The system showed the yield factor as 1923.6 kW h/kWp/year. Moreover, the proposed system had a capacity factor of 21.7%. The cost of energy and payback period were 0.146 USD/kWh (0.056 OMR/kW h) and 4 years respectively. However, many other factors due to economic challenges, Government policies and social acceptance must be resolved to establish a viable market for PV technology in Oman. [ABSTRACT FROM AUTHOR]

Renewable Energy resources contribution is increasing in power generation because of fast depletion of fossil fuels. Solar power generation is one of the major sources of renewable energy resources in tropical countries like India. But solar power generation is facing the challenge of continuous and reliable power supply because of its infrequent nature. Hence reliability evaluation of Photovoltaic (PV) system has become a demanding research area. The impact of unreliable power supply can be improved by using energy storage system viz. battery. In this paper, power generation probability of PV system is obtained using Monte Carlo Simulation (MCS) technique and reliability of PV system with and without battery storage system is evaluated by considering failure rate and repair time for every component in the PV system which provide accurate results. The proposed methodology was implemented on K L E F 161.72 kW PV power plant connected to a load of 160 kW. The proposed methodology was implemented on K L E F 161.72 kW PV power plant connected to a load of 160 kW, the results obtained are presented and are analyzed. [ABSTRACT FROM AUTHOR]