Search

Azide compounds are widely used and especially, polymers bearing pendant azide groups are highly desired in numerous fields. However, harsh reaction conditions are always mandatory to achieve full azidation, causing severe side reactions and degradation of the polymers. Herein, we report the design and preparation of two azide ionic liquids (AILs) with azide anion and triethylene glycol (E3)‐containing cation, [P444E3][N3] and [MIME3][N3]. Compared with the traditional sodium azide (NaN3) approach, both AILs showed much higher reaction rates and functional‐group tolerance. More importantly, they could act as both reagents and solvents for the quantitative azidation of various polymeric precursors under mild conditions. Theoretical simulations suggested that the outstanding performance of AILs originated from the existence of ion pairs during the reaction, and the E3 moieties played a crucial role. Lastly, after the reaction, the AILs could be easily regenerated, presenting a safer, greener, and highly efficient synthesis route for azide polymers. [ABSTRACT FROM AUTHOR]

Particles and sheets: Polyaniline is used as a linker to couple metal oxides and hydroxides to graphene sheets. Hydrothermal treatment converts these coupled hybrids into nitrogen‐doped 2D carbon nanosheets integrated with size‐controlled metal nanoparticles. This structure gives these 2D nanohybrids promising electrochemical behavior in supercapacitors and oxygen‐reduction reactions. [ABSTRACT FROM AUTHOR]

Reported here is a molecular dipole that self‐assembles into highly ordered patterns at the liquid‐solid interface, and it can be switched at room temperature between a bright and a dark state at the single‐molecule level. Using a scanning tunneling microscope (STM) under suitable bias conditions, binary information can be written at a density of up to 41 Tb cm−2 (256 Tb/in2). The written information is stable during reading at room temperature, but it can also be erased at will, instantly, by proper choice of tunneling conditions. DFT calculations indicate that the contrast and switching mechanism originate from the stacking sequence of the molecular dipole, which is reoriented by the electric field between the tip and substrate. [ABSTRACT FROM AUTHOR]

Knoevenagel condensation is a powerful tool for the construction of vinylene‐linked covalent organic frameworks. Herein, we established a concise approach to vinylene‐linked COFs by Knoevenagel condensation at the multi‐methyl groups of a pyridine ring through in situ formation of an N‐acyl pyridinium cation in the presence of various acylating reagents. Following this strategy, two vinylene‐linked COFs were constructed using 2,4,6‐trimethylpyridine and multi‐aldehyde‐substituted aromatic derivatives as monomers. The resultant COFs are highly crystalline and assembled into hexagonal lattices with specific surface areas as large as 1915 m2 g−1 (vs. 1972 m2 g−1 of the theoretical value). The stable and abundant pyridine‐decorated regular nanochannels within the COFs allow for catalyzing the esterification of several pharmaceutical intermediates with distinct spatially confined selectivity and recyclability, representing an environmentally friendly catalytic organic transformation. [ABSTRACT FROM AUTHOR]

Embedding heteroatoms into the main backbones of polymeric materials has become an efficient tool for tailoring their structures and improving their properties. However, owing to comparatively harsh heteroatom‐doping conditions, this has rarely been explored in covalent organic frameworks (COFs). Herein, upon aldol condensation of a trimethyl‐substituted pyrylium salt with a tritopic aromatic aldehyde, a two‐dimensional oxonium‐embedded COF with vinylene linkages was achieved, which was further converted to a neutral pyridine‐cored COF by in situ replacement of oxonium ions with nitrogen atoms under ammonia treatment. The two heteroatom‐embedded COFs are conceptually isoelectronic with each other, featuring similar geometric structures but different electronic structures, rendering them capable of catalyzing the visible‐light‐promoted multi‐component synthesis of tri‐substituted pyridine derivatives with good recyclability. [ABSTRACT FROM AUTHOR]

The article discusses the novel graphene-inspired synthesis of two-dimensional (2D) sandwichlike, graphene-based conjugated microporous polymers (GMPs). It says that nuclear magnetic resonance (NMR) spectroscopy was conducted to study the molecular structure of GMP-S. It states that the exciton dynamic of MP-S and GMP-S was examined by time-resolved photoluminescence spectroscopy. It mentions that the 2D porous polymers were used in preparing heteroatom-doped 2D porous carbons.

We developed a simple approach to synthesizing ionic vinylene‐linked two‐dimensional covalent organic frameworks (COFs) through a quaternization‐promoted Knoevenagel condensation at three aromatic methyl carbon atoms of N‐ethyl‐2,4,6‐trimethylpyridinium halide with multitopic aromatic aldehyde derivatives. The resultant COFs exhibited a honeycomb‐like structure with high crystallinity and surface areas as large as 1343 m2 g−1. The regular shape‐persistent nanochannels and the positively charged polymeric frameworks allowed the COFs to be uniformly composited with linear polyethylene oxide and lithium salt, displaying ionic conductivity as high as 2.72×10−3 S cm−1. [ABSTRACT FROM AUTHOR]

The polarity of a semiconducting molecule affects its intrinsic photophysical properties, which can be tuned by varying the molecular geometry. Herein, we developed a D3h‐symmetric tricyanomesitylene as a new monomer which could be reticulated into a vinylene‐linked covalent organic framework (g‐C54N6‐COF) via Knoevenagel condensation with another D3h‐symmetric monomer 2,4,6‐tris(4′‐formyl‐biphenyl‐4‐yl)‐1,3,5‐triazine. Replacing tricyanomesitylene with a C2v‐symmetric 3,5‐dicyano‐2,4,6‐trimethylpyridine gave a less‐symmetric vinylene‐linked COF (g‐C52N6‐COF). The octupolar conjugated characters of g‐C54N6‐COF were reflected in its scarce solvatochromic effects either in ground or excited states, and endowed it with more promising semiconducting behavior as compared with g‐C52N6‐COF, such as enhanced light‐harvesting and excellent photo‐induced charge generation and separation. Along with the matched energy level, g‐C54N6‐COF enabled the two‐half reactions of photocatalytic water splitting with an average O2 evolution rate of 51.0 μmol h−1 g−1 and H2 evolution rate of 2518.9 μmol h−1 g−1. Such values are among the highest of state‐of‐the‐art COF photocatalysts. [ABSTRACT FROM AUTHOR]

Developing effective synthetic strategies as well as enriching functionalities for sp2‐carbon‐linked covalent organic frameworks (COFs) still remains a challenge. Now, taking advantage of a variant of Knoevenagel condensation, a new fully conjugated COF (g‐C34N6‐COF) linked by unsubstituted C=C bonds was synthesized. Integrating 3,5‐dicyano‐2,4,6‐trimethylpyridine and 1,3,5‐triazine units into the molecular framework leads to the enhanced π‐electron communication and electrochemical activity. This COF shows uniform nanofibrous morphology. By assembling it with carbon nanotubes, a flexible thin‐film electrode for a micro‐supercapacitor (MSC) can be easily obtained. The resultant COF‐based MSC shows an areal capacitance of up to 15.2 mF cm−2, a high energy density of up to 7.3 mWh cm−3, and remarkable rate capability. These values are among the highest for state‐of‐the‐art MSCs. Moreover, this device exhibits excellent flexibility and integration capability. [ABSTRACT FROM AUTHOR]

Abstract: Structurally well‐defined graphene nanoribbons (GNRs) have attracted great interest because of their unique optical, electronic, and magnetic properties. However, strong π–π interactions within GNRs result in poor liquid‐phase dispersibility, which impedes further investigation of these materials in numerous research areas, including supramolecular self‐assembly. Structurally defined GNRs were synthesized by a bottom‐up strategy, involving grafting of hydrophilic poly(ethylene oxide) (PEO) chains of different lengths (GNR‐PEO). PEO grafting of 42–51 % percent produces GNR‐PEO materials with excellent dispersibility in water with high GNR concentrations of up to 0.5 mg mL−1. The “rod–coil” brush‐like architecture of GNR‐PEO resulted in 1D hierarchical self‐assembly behavior in the aqueous phase, leading to the formation of ultralong nanobelts, or spring‐like helices, with tunable mean diameters and pitches. In aqueous dispersions the superstructures absorbed in the near‐infrared range, which enabled highly efficient conversion of photon energy into thermal energy. [ABSTRACT FROM AUTHOR]

It is highly desirable to develop electroactive organic materials and their derivatives as green alternatives of cathodes for sustainable and cost-effective lithium-ion batteries (LIBs) in energy storage fields. Herein, compact two-dimensional coupled graphene and porous polyaryltriazine-derived frameworks with tailormade pore structures are fabricated by using various molecular building blocks under ionothermal conditions. The porous nanosheets display nanoscale thickness, high specific surface area, and strong coupling of electroactive polyaryltriazine-derived frameworks with graphene. All these features make it possible to efficiently depress the dissolution of redox moieties in electrolytes and to boost the electrical conductivity of whole electrode. When employed as a cathode in LIBs, the two-dimensional porous nanosheets exhibit outstanding cycle stability of 395 mAh g−1 at 5 A g−1 for more than 5100 cycles and excellent rate capability of 135 mAh g−1 at a high current density of 15 A g−1. [ABSTRACT FROM AUTHOR]

We demonstrate the spontaneous and reversible transition between the two- and three-dimensional self-assembly of a supramolecular system at the solid-liquid interface under electrochemical conditions, using in situ scanning tunneling microscopy. By tuning the interfacial potential, we can selectively organize our target molecules in an open porous pattern, fill these pores to form an auto-host-guest structure, or stack the building blocks in a stratified bilayer. Using a simple electrostatic model, we rationalize which charge density is required to enable bilayer formation, and conversely, which molecular size/charge ratio is necessary in the design of new building blocks. Our results may lead to a new class of electrochemically controlled dynamic host-guest systems, artificial receptors, and smart materials. [ABSTRACT FROM AUTHOR]

The cover page of the journal "A Journal of the Gesselschaft Deutscher Chemiker Angewandte Chemie" is presented.