Search

Lattice mismatch significantly influences microscopic transport in semiconducting devices, affecting interfacial charge behavior and device efficacy. This atomic‐level disordering, often overlooked in previous research, is crucial for device efficiency and lifetime. Recent studies have highlighted emerging challenges related to lattice mismatch in perovskite solar cells, especially at heterojunctions, revealing issues like severe tensile stress, increased ion migration, and reduced carrier mobility. This review systematically discusses the effects of lattice mismatch on strain, material stability, and carrier dynamics. It also includes detailed characterizations of these phenomena and summarizes current strategies including epitaxial growth and buffer layer, as well as explores future solutions to mitigate mismatch‐induced issues. We also provide the challenges and prospects for lattice mismatch, aiming to enhance the efficiency and stability of perovskite solar cells, and contribute to renewable energy technology advancements. [ABSTRACT FROM AUTHOR]

A persistent challenge in utilizing Au nanocrystals for surface‐enhanced Raman spectroscopy (SERS) lies in achieving controllable superstructures that maximize SERS performance. Here, a novel strategy is proposed to enhance the SERS performance by precisely adjusting the tip arrangements of Au nanobipyramids (BPs) in two‐dimensional (2D) superlattices (SLs). This is achieved through ligand‐exchange of Au BPs, followed by liquid‐air interfacial assembly, resulting in large‐area, transferrable SL membranes. The key to controlling the arrangement of Au BPs in the SLs is the regulation of the amount of free ligands added during self‐assembly, which allows for the precise formation of various configurations such as tilted SLs, tip‐on‐tip SLs, and tip‐to‐tip SLs. Among these configurations, tip‐on‐tip SLs exhibit the highest enhancement factor for SERS, reaching an impressive value of 1.95×108, with uniform and consistent SERS signals across a large area. The experimental findings are further corroborated by simulations using the finite element method. This study establishes an efficient method for engineering the microstructure of 2D SLs composed of Au BPs, highlighting the importance of fine‐tuning the tip arrangements of Au BPs to regulate SERS performance. [ABSTRACT FROM AUTHOR]

Functional thin films, being fabricated by incorporating discrete supramolecular architectures, have potential applications in research areas such as sensing, energy storage, catalysis, and optoelectronics. Here, we have determined that an anion‐coordinated triple helicate can be solution‐processed into a functional thin film by incorporation into a polymethyl methacrylate (PMMA) matrix. The thin films fabricated by the incorporation of the anion‐coordinated triple helicate show multiple optical properties, such as fluorescence, CD, and CPL. In addition, the film has the ability to recognize choline and choline derivatives in a water system. The successful recognition of Ch+ by the film represents the first example of utilizing 'aniono'‐supramolecular architectures for biomolecule detection in aqueous solution and opens up a new route for designing biocompatible functional materials. [ABSTRACT FROM AUTHOR]

Covalent organic frameworks (COFs) with structural designability and tunability of photophysical properties enable them to be a promising class of organic luminescent materials by incorporating well‐designed fluorescent units directly into the periodic skeletons. The photophysical properties of COFs are mainly affected by the structural features, which determine the conjugation degree, charge delocalization ability, and exciton dynamics of COFs. To understand the relationship between COF structures and their photophysical properties, two COFs with the same pyrene chromophore units but different linkages (imine or vinylene) were designed and synthesized. Interestingly, different linkages endow COFs with huge differences in solid‐state photoluminescence quantum yield (PLQY) for imine‐ and vinylene‐linked pyrene‐based COFs, which possess PLQY values of 0.34 % and 15.43 %, respectively. The femtosecond‐transient absorption spectra and time‐dependent density functional theory reveal the different charge‐transfer pathways in imine‐ and vinylene‐linked COFs, which influence the exciton relaxation way and fluorescence intensity. In addition, an effective white‐light device was obtained by coating the vinylene‐linked COF on a light‐emitting diode strip. [ABSTRACT FROM AUTHOR]

Flexible perovskite solar cells (FPSCs) with excellent recoverability show a wide range of potential applications in portable power sources. The recoverability of FPSCs requires outstanding bendability of each functional layer, including the flexible substrates, electrodes, perovskite light absorbers, and charge transport materials. This review highlights the recent progress and practical applications of high‐recoverability FPSCs, and illustrates the routes toward improvement of the recoverability and environmental stability through the choice of flexible substrates and the preparation of high‐quality perovskite films, as well as the optimization of charge‐selective contacts. In addition, we explore the intrinsic properties of each functional layer from the physical perspective and analyze how to select suitable functional layers. Additionally, some effective strategies are summarized, including material modification engineering of selective contacts, additives and interface engineering of interlayers, which can release mechanical stress and increase the power‐conversion efficiency (PCE) and recoverability of the FPSCs. The challenges of making high‐performance FPSCs with long‐term stability and high recoverability are discussed. Finally, future applications and perspectives for FPSCs are discussed, aiming to promote more extensive commercialization processes for lightweight and durable FPSCs. [ABSTRACT FROM AUTHOR]

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO2) reduction half‐reaction and the water (H2O) oxidation half‐reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF‐bpy‐Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge‐separation ability of viCOF‐bpy‐Re is promoted by low polarized π‐bridges between rhenium complexes and triazine ring units, and the efficient charge‐separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge‐transfer process, to form photogenerated electrons involved in CO2 reduction and photogenerated holes that participate in H2O oxidation simultaneously. The viCOF‐bpy‐Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g−1 h−1 with about 100 % selectivity) and oxygen (O2) evolution (90.2 μmol g−1 h−1) among all the porous catalysts in CO2 reduction with H2O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations. [ABSTRACT FROM AUTHOR]

The slow reaction kinetics and structural instability of organic electrode materials limit the further performance improvement of aqueous zinc‐organic batteries. Herein, we have synthesized a Z‐folded hydroxyl polymer polytetrafluorohydroquinone (PTFHQ) with inert hydroxyl groups that could be partially oxidized to the active carbonyl groups through the in situ activation process and then undertake the storage/release of Zn2+. In the activated PTFHQ, the hydroxyl groups and S atoms enlarge the electronegativity region near the electrochemically active carbonyl groups, enhancing their electrochemical activity. Simultaneously, the residual hydroxyl groups could act as hydrophilic groups to enhance the electrolyte wettability while ensuring the stability of the polymer chain in the electrolyte. Also, the Z‐folded structure of PTFHQ plays an important role in reversible binding with Zn2+ and fast ion diffusion. All these benefits make the activated PTFHQ exhibit a high specific capacity of 215 mAh g−1 at 0.1 A g−1, over 3400 stable cycles with a capacity retention of 92 %, and an outstanding rate capability of 196 mAh g−1 at 20 A g−1. [ABSTRACT FROM AUTHOR]

Hydrophobic tagging (HyT) is a potential therapeutic strategy for targeted protein degradation (TPD). Norbornene was discovered as an unprecedented hydrophobic tag in this study and was used to degrade the anaplastic lymphoma kinase (ALK) fusion protein by linking it to ALK inhibitors. The most promising degrader, Hyt‐9, potently reduced ALK levels through Hsp70 and the ubiquitin−proteasome system (UPS) in vitro without compensatory upregulation of ALK. Furthermore, Hyt‐9 exhibited a significant tumor‐inhibiting effect in vivo with moderate oral bioavailability. More importantly, norbornene can also be used to degrade the intractable enhancer of zeste homolog 2 (EZH2) when tagged with the EZH2 inhibitor tazemetostat. Thus, the discovery of novel hydrophobic norbornene tags shows promise for the future development of TPD technology. [ABSTRACT FROM AUTHOR]

To enhance the fluorescence efficiency of semiconductor nanocrystal quantum dots (QDs), strategies via enhancing photo‐absorption and eliminating non‐radiative relaxation have been proposed. In this study, we demonstrate that fluorescence efficiency of molybdenum disulfide quantum dots (MoS2 QDs) can be enhanced by single‐atom metal (Au, Ag, Pt, Cu) modification. Four‐fold enhancement of the fluorescence emission of MoS2 QDs is observed with single‐atom Au modification. The underlying mechanism is ascribed to the passivation of non‐radiative surface states owing to the new defect energy level of Au in the forbidden band that can trap excess electrons in n‐type MoS2, increasing the recombination probability of conduction band electrons with valence band holes of MoS2. Our results open an avenue for enhancing the fluorescence efficiency of QDs via the modification of atomically dispersed metals, and extend their scopes and potentials in a fundamental way for economic efficiency and stability of single‐atom metals. [ABSTRACT FROM AUTHOR]

The fabrication of anion‐coordinated assemblies into functional soft materials remains a major challenge. To this end, four C2‐symmetric anion‐binding ligands equipped with ortho‐phenylene‐bridged bis(urea) and amine or amide ends were designed, which generated A2L3 triple helical architectures upon self‐assembly with phosphate ions. Hierarchical intermolecular hydrogen bonds among the terminal amine/amide groups and urea moieties resulted in the formation of functional gels. The obtained gels were further applied for conductive adhesion between different surfaces, displaying excellent flexibility and selective wettability. The viscoelastic gels constructed from anion‐coordinated assemblies described in this work represent the first example of a new class of anion‐coordination‐driven smart materials. [ABSTRACT FROM AUTHOR]

Adhesives, Gels, Self-Assembly, Anion Coordination, Hydrogen Bonding Inside Back Cover: Hierarchical Self-Assembly of Adhesive and Conductive Gels with Anion-Coordinated Triple Helicate Junctions (Angew. Keywords: Adhesives; Anion Coordination; Gels; Hydrogen Bonding; Self-Assembly EN Adhesives Anion Coordination Gels Hydrogen Bonding Self-Assembly 1 1 1 05/18/22 20220523 NES 220523 B The hierarchical self-assembly b of functional gels with anion-coordinated architecture junctions will open up a new avenue for the design and fabrication of a broad range of smart materials. [Extracted from the article]