Search

This research constructs a 26 GHz waveguide slot antenna with decent gain. The application of millimeter-wave requires high bandwidth and gain to increase the traffic and users for millimeter-wave and 5G technology. The application of millimeter waves requires a high gain and bandwidth to achieve the requirements of traffic and users increasing for 5G technology and existing millimeter-wave. High-gain and power handling are provided by waveguide slot antennas. Three waveguide structures which are two waveguide antennae and a waveguide horn have been simulated by using CST and fabricated by a 3D printer. The tilt technique has been used with a waveguide to increase the bandwidth and gain of an antenna. A waveguide with broad wall tilt slots has one diction beam while a waveguide with broad and narrow wall tilt slots has two direction beams, each length of the wall enough to distribute six symmetric tilt slots. The gain of 14.3 dB and 1.9 GHz bandwidth are recorded for an antenna with broad wall tilt slots with one beam. While the waveguide with broad and narrow wall tilt slots achieved a gain of 13.9dB and a bandwidth of 1.9 GHz. The proposed antenna is a decent candidate for use with millimeter waves. [ABSTRACT FROM AUTHOR]

This paper focuses on the design of a multibeams antenna using waveguide slots technology at Xband. The multi-beams radiation is proposed to expand the coverage of the single antenna, thus more capacity is enabled. Waveguide slots antenna is a well-known antenna for high power and gain transmission capabilities. Therefore, it is preferred. In this work, four variations of waveguide slots antennas are studied. The slot distribution covers one to four broad and narrow walls of the waveguide. This technique enables multibeams patterns. The performance of the proposed antennas is simulated using CST microwave software. The simulated responses of the antennas show that a good matched with return loss greater than 10 dB at the desired frequency. The four proposed antennas achieved a good gain between 6.3 and 7.4 dB with directional beamwidth of 15 degree. The proposed antennas are suitable for implementing in radar applications. [ABSTRACT FROM AUTHOR]

In this paper, a simple method is proposed to diagnose the position of the damaged sensors. The position of the damaged sensors is diagnosed on the basis of the null depth level and the number of nulls for the degraded radiation pattern. The method is initiated with tabulation of the array radiation pattern with a single damaged sensor. The corresponding pattern is set as the reference to the radiation pattern of the failed sensors. The tabulated damaged array sensors are compared to a configuration of the assumed damaged sensor. The radiation pattern with deeper null depth level will be the location of the damaged sensor. Moreover, the symmetrical sensor damaged (SSD) technique diagnose the position of damaged sensor, in which on the basis of nulls one can detect the location of damaged sensors. The proposed method diagnoses the location of damaged sensors on the basis of pattern without complex computation as compared to available methods. [ABSTRACT FROM AUTHOR]