Search

The paper deals with the energy transition, focusing on the decisions to be taken about the change in the energy conversion capacity of specified portion of the universe, such as industrial or domestic districts, regions, countries, etc. Conversion capacity is intended here as the set of all energy conversion and storage units characterized by type, size and number, and interacting with the natural gas and electricity grids. The goal is to find guidelines for new installations, obtained by simulations of a model able to describe properly the behavior of each energy conversion technology and the interaction with grids. The model is based on a traditional MILNP approach, but contains unique features in the literature, which allow to obtain results of general validity for applications to very different geographical areas, or to countries including very different regions that transmit energy with each other or export/import it from abroad. The main novelty of this work is to identify the best planning for the decarbonisation of energy demand sectors, according to the criterion of minimum cost, both at global and at regional level. The results applied to the case of Italy allow identifying clearly the energy demand sectors to which new installations should be applied first to minimize the cost for the total energy system, and the units that must be foreseen to satisfy these energy demands, i.e. a precise strategy for the energy transition towards a 100% renewable system. • A multi-regional model is built to find the most convenient energy transition path. • General guidelines for Western countries are derived from the Italian case study. • Replacement of boilers with heat pumps allows increasing RES share from 20 to 30%. • For RES share >60%, PtG is the low-carbon strategy for high temperature heat demand. • Transportation is the last energy sector that should be decarbonized. [ABSTRACT FROM AUTHOR]

Abstract: The aim of Educa-RUE project is to improve energy performance in building sector at local level and with particular attention to educational buildings, by promoting the ability of local players to guide and orient initiatives, designed to encourage energy saving by means of specific measures and integrated tools. The project is therefore focused to speed up the implementation of European Directive on Energy Performance in Buildings, EPBD (2002/91/EC), in Member States at local government level and to ensure its operability, within the various national legislations of reference. Educa-RUE lasted 30months, from January 2008 to June 2010, and involved the following eight partners: for Italy, Provinces of Potenza (project leader), Perugia, Rieti and Palermo; for other Countries, Climate Energy Ltd. Essex and Energy Solutions North West London (UK), Associación Aragonesa de Entidades Locales ASAEL (Spain), Municipality of Prenzlau (Germany). A number of closely interconnected actions were carried on in eight Work Packages (WPs) to face the energy efficiency aspects identified as primary problems by the partners. The project developed a model process, known as “Educa-RUE method”, to assess possible policies of intervention on educational buildings, owned or managed by each Partner. In particular the Province of Perugia, leader of WP 2 and 5, provided guide lines and tools in order to: identify the state of the art of EPBD implementation and the main non-technological barriers, which are preventing its application at local level; select, within the Province/area patrimony, the most suitable educational building, to be used as a shining example to develop the following testing phases of the project; carry on an energy check, or audit, of selected buildings, by involving the educational community as user and active participant in the whole process; elaborate an executive project, concerning the description of all the building elements (structure, roof, heating/cooling plants, etc.) which need to be replaced/improved and the application of an energy/environmental assessment; plan refurbishing interventions for the rest of the school buildings directly managed by each Partner, according to specific priority selection criteria, which represents a guiding and coordinating act for those Administrations directly or indirectly interested in the Project. This paper presents the results obtained by testing and proving Educa-RUE method in different regional areas. Its findings can be extended to other building typologies in order to create a reference model for local planners and responsible. [Copyright &y& Elsevier]

Abstract: This manuscript summarises the results of a project concerning the energy consumption of public buildings and utilities and the evaluation of the most effective and feasible ways to save energy in Certaldo, a small township in Tuscany with approximately 16,000 inhabitants. The energy analysis highlighted a specific partitioning of electric and thermal energy for final use. For example, more than 60% of the electricity consumption of the town is for street lighting, which is still uses obsolete and environmentally problematic lighting technologies, and more than 13% for lighting public schools. With respect to heat utilities, more than 60% of natural gas consumption is for heating public schools and 18% is for heating sport/athletic facilities. The partitioning of energy consumption introduced a list of requalification measures focused on specific areas: each area has an energy saving potential and specific feasible energy requalification technologies in addition to the possible introduction of suitable renewables. The selection of the proposed interventions was based on the results of model simulations, municipal urban regulations and prevailing trends resulting from a survey of municipalities that are the same size as Tuscany. The type and impact of these interventions were also in agreement with the trends found in different international contexts. In the final part of this paper, some instruments and considerations regarding the evaluation of the return on investment (ROI) for investments in energy bill reduction are presented. Although few data are available in the literature about actions to improve energy efficiency in the public sector of small municipalities, the comparison of energy consumption of Certaldo with that of bigger towns with similar climate conditions showed a reasonable proportionality to population and size of the urban area. Thus, the methodology and the examined solutions could be considered a representative case study and a starting point for municipalities with a similar size and number of inhabitants. Finally, a curve of profitability for investments in energy efficiency of the administration was constructed. It can be extended, at least in a first approximation, to similar cases. [Copyright &y& Elsevier]

Abstract: The European Directive on Energy Performance of Buildings (EPBD) imposes the adoption of measures for improving the energy efficiency in buildings. These measures should take into account the local weather conditions as well as internal thermal environment and cost-effectiveness. In this respect, Italy is a very interesting benchmark. For Northern Italy, the climatic context is particularly difficult to deal with cold winters and hot summers. The legislations are changing very rapidly, but has not fully adapted to the local context. The considered methodology still involves winter heating while summer cooling is addressed in incomplete and inadequate ways. The energy issue is addressed only partially as final energy consumption, but with little attention to LCA. Moreover, the belief that the buildings with high energy savings are too expensive, and therefore not attractive from economic point of view. For these reasons, it is very important to develop case studies to demonstrate the effectiveness of sustainable energy in architecture, according to a holistic approach. This paper describes a detailed techno–economic analysis for Borgo Solare project, an extremely advanced and innovative residential settlement designed on sustainable architecture concepts. One of the most innovative aspects of the project is that it is not just an experimental operation but Borgo Solare is a real urban district, which will be built without public funds and should be inhabited by common people. Excellent energy performance, therefore, must be accompanied by affordable market prices. The energy and economical analysis is presented taking into account also the embodied energy of the building. The results on the performance of a sample building (case study) of this settlement are reported, according to different construction standards: prior to EPBD, present from the EPBD and more efficient developed specifically for the project. It has been shown that using the better design practices and technologies the higher initial embodied energy in a low energy building could quickly paid back during its life span. The economic analysis, in the same way, evidences that higher initial investment in case of energy efficient building could become economically convenient during the life span of the building. This kind of analysis is essential to determine the actual sustainability of a building. [Copyright &y& Elsevier]

Abstract: In the last years, the growing demand for air conditioning has caused a significant increase in demand for primary energy resources. Solar-powered cooling is one of the technologies which allows to obtain, by using the renewable solar source, an important energy saving compared to traditional air conditioning plants. The paper describes different technical installations for solar cooling, their way of operation, advantages and limits. The objective of the present study has been to analyze the technical and economic feasibility of solar absorption cooling systems, designed for two different application fields: industrial refrigeration and air conditioning. The possibility to replace or integrate the existing plants is studied, by considering the refrigeration requirements of a company, which works in meat manufacturing, and the heating and cooling demands of a hotel located in a tourist town in Italy. In the first case, the system comprises an absorption chiller coupled to solar flat plate collectors, whereas the second application is about a hybrid trigeneration plant, known as thermo-solar trigeneration; this option allows having greater operational flexibility at sites with demand for energy in the form of heating as well as cooling, for example in a hotel. In this way the authors could compare different results obtained by a technical and economic experimental analysis based on existing users and evaluate the advantages and disadvantages in order to suggest the best solution for the two studied cases. [Copyright &y& Elsevier]

• Electricity and electrification is a viable solution for the energy transition. • Electricity triangle assures a consistent framework for the energy transition. • Multifaceted benefits: energetic, environmental and socio-economic. • Conceptualization of a set of metrics for impact assessment. • A real case study (Italy) considering its evolution up to 2050. Greenhouse gases along with pollution generated by the present energy paradigm widely based on fossil fuels are providing large impacts in terms of climate change and the health of human and biological systems at large. A shift in the energy paradigm, from fossil fuels to renewable energy, is urgently needed for nature and society. This is what we refer to as the energy transition. An old commodity – electricity – can play a new key role in the energy transition. That can happen through what we call the electricity triangle involving electricity generation from Renewable Energy Sources, exploitation of electricity as the main energy vector, and electrification of the final energy uses in all sectors. The possible deployment of the electricity triangle must be carefully assessed in all its possible implications, from technological, economic, societal and environmental perspectives. In this paper, we conceptualize the electricity triangle as a viable approach to the energy transition, and we propose a set of holistic metrics to assess its possible impacts. We apply the electricity triangle framework to the case of Italy based on sectorial studies on RES generation and electrification in building, industry and transport sectors. Our results indicate that Italy in 2050 has the potential to achieve 85.6% penetration of RES in its electricity supply, while 41%, 53% and 42% of the energy consumptions in transport, residential, and industry sectors will be electrified. Ultimately, this would lead to a 68% reduction in CO 2 emissions compared to current levels. [ABSTRACT FROM AUTHOR]