Search

Abstract In this paper, compressive material tests on unconfined/confined resin and steel reinforced resin were experimentally evaluated in order to validate the numerical results. The uniaxial model which combines damage mechanics and Ramberg-Osgood relationship is proposed in this paper to describe the uniaxial compressive behaviour of resin and steel reinforced resin. Numerical homogenization is conducted to predict the tensile and shear behaviour of steel reinforced resin after validated by compressive material test results. The friction angle β , the ratio of the yield stress in triaxial tension to the yield stress in triaxial compression K, and the dilation angle ψ of the linear drucker-prager plastic model are obtained based on experiments and numerical homogenization simulation. The confinement effects on resin and steel reinforced resin could be effectively simulated by combing above parameters and uniaxial compressive model. Finite element simulations on unconfined/ confined resin and steel reinforced resin material tests were conducted to validate the material parameters proposed in this paper. A good agreement is observed, indicating the model and parameters proposed in this paper could be effectively used in the finite element simulation of injected bolts. [ABSTRACT FROM AUTHOR]

This paper introduces a numerical simulation tool using the Finite Element Method (FEM) for near-surface mounted (NSM) strengthening technique using fibre reinforced polymers (FRP) applied to concrete elements. In order to properly simulate the structural behaviour of NSM FRP systems there are three materials (concrete, FRP and the adhesive that binds them) and two interfaces (FRP/adhesive and adhesive/concrete) that shall be considered. This work presents the major details of a discontinuous-based constitutive model which aims at simulating NSM FRP interfaces implemented in the FEMIX FEM software. This constitutive model was adapted from one available in the literature, originally employed for fracture simulation in meso-scale analyses of quasi-brittle materials, which is based on the classical Flow Theory of Plasticity combined with fracture mechanics concepts. The most important features of the implemented constitutive model are the consideration of both fracture modes I and II and the possibility of performing 2D and 3D analysis. In the end, results based on FEM simulations are presented with the aim of investigating the soundness and accuracy of the constitutive model to simulate NSM FRP systems’ interfaces. [ABSTRACT FROM AUTHOR]