Search

Energy storage systems have an important effect on increasing the flexibility of power grids and are necessary to achieve the goals of smart grids. So far, many researches have been conducted in the field of optimal utilization of batteries, but most of them have studied the effects of batteries only on the side of the transmission or distribution network. In the present study, the effect of the installation and optimal operation of energy storage systems on both sides of the transmission and distribution network has been investigated. This paper presents a bi-level optimization model for integrated energy management in transmission and distribution smart grids along with demand management issues. Considering that both proposed models are mixed integer linear programming models, it is difficult to solve them by direct methods. Therefore, a method based on the change of variables and KKT equations is presented to solve these problems, and globally optimal solutions to these problems are guaranteed. Several integrated systems that include transmission and distribution networks are considered to evaluate the proposed model and method, and the results show that the proposed model is efficient and shows the positive effect of modeling energy storage systems on both sides of the network. [ABSTRACT FROM AUTHOR]

In C-RAN architecture, all computational processing is performed in the central baseband unit (BBU) pool, while radio operations are carried out in the remote radio heads (RRHs). The central BBU pool is connected to the RRHs by fronthaul links. Therefore, by separating the processing unit and the radio units, the clustering structure of RRHs can be designed to adapt to network changes. This paper deals with the problem of radio and computation resource allocation to maximize the weighted sum rate. To reduce complexity, we use user-centric clustering and appropriate training resource allocation. Additionally, to lessen channel training overhead, an incomplete model of channel state information is considered, in which only intra-cluster channel state information is estimated. By replacing a sticky lower bound of user data rate in the main problem, the beamforming vectors under the constraints of computational and radio resources are designed in three steps. In the first step, the weighted sum rate maximization problem is solved under maximum radio transmitted power constraints by the weighted minimum mean square error method. Then, in the second step, we propose a greedy algorithm to allocate computational resources to users. In the third step, fronthaul capacity constraints are applied by another greedy algorithm [ABSTRACT FROM AUTHOR]

Simultaneous use of an efficient routing protocol and mobile sink not only prevents rapid sensor energy depletion but also effectively improves the energy balance in wireless sensor networks. In this paper, a new data aggregation method is proposed called "Ant colony-based Routing and Petal-shaped Data Aggregation (ARPDA)", which includes clustering, Cluster Head (CH) selection, intra-cluster routing, determining polling points, and designing the sink node trajectory. In the proposed method, the network is divided by several virtual concentric circles that are equidistant from each other. The intersection point of these circles with the virtual lines passing through the origin of the network determines the probable polling points for the sink node. First, by efficiently clustering the sensor nodes and forming an intra-cluster routing tree based on the ant colony optimization algorithm, the sensor data is aggregated in CHs; then, by selecting the appropriate polling points and designing a petal-shaped path, the sink node periodically collects the aggregated data in CHs based on two linear and circular movements. Considering the sink movement in the CH selection process is another advantage of the proposed algorithm. Numerical results confirm the better performance of the proposed algorithm compared to the EDT algorithm. [ABSTRACT FROM AUTHOR]

In this paper, using a deep learning technique, the sensing characteristic of a refractive index (RI) sensor based on a multimode optical fiber speckle-gram has been extracted. The investigated sensor structure consists of a tapered optical fiber or microfiber (MF) induced on a standard multimode optical fiber (MMF). Due to the presence of evanescent waves around the MF, the guiding status of the end MMF is dependent on the external RI around the taper. Thereby, the propagating modes and resulting interference pattern or speckle-gram become sensitive to the changes in the taper environment. Herein, by analyzing and quantifying the speckle-gram modulation, the RI changes around the taper are characterized. To extract the sensing characteristic and improve its measurement accuracy, deep learning algorithms and specifically the ResNet deep neural network are used in the processing of the output speckle-grams. Using this algorithm, while the tapered fiber is immersed in different refractive index solutions in the range of 1.33 to 1.368, a set of output speckle images is captured for learning and then a number of them are used for measurement, and finally the accuracy of detecting the refractive index of the solutions RI has been achieved up to 95%. [ABSTRACT FROM AUTHOR]

In today's transmission networks (TNs), the sudden failure of some generation units (GUs) from the generation cycle can cause some problems such as the imbalance between generation and demand-side (consumption) leading to increasing the cost of operating the power system. On the other hand, distributed generators (DGs) in distribution networks (DNs) can be a relatively good alternative to-the-disconnected GUs with their ability to react quickly. Therefore, robust cooperation-for integrated TN&DN is essential. However, it is impossible to solve the cooperation of TN&DN problem without considering the AC optimal power flow (ACOPF), the operators' independence, and the information privacy. Thus, in this paper, a linearized ACOPF model for the robust cooperation of TN&DN problem is presented along with an efficient hierarchical decentralized solution method to solve the robust cooperation of integrated TN&DN in which the information-privacy-is-maintained-for both network operators. In this paper, the numerical simulations are analyzed for standard IEEE 30/118-bus transmission and IEEE 33/69-bus distribution networks. Finally, the paper validates through simulations the accuracy and computational-efficiency-of the proposed robust optimization problem and hierarchical decentralized method. [ABSTRACT FROM AUTHOR]

This paper uses the unique biometric features of fingerprints to generate random cryptographic keys. The main aspects of the security of the generated key include the privacy of the fingerprint and the randomness and complexity of the key generation algorithm. In the proposed method, first, the unique fingerprint features, which include Minutiae points, are extracted from the fingerprint image. Then, to increase the statistical properties and complexity of the algorithm, the Euclidean distance and the angle of all the points of Minutiae relative to each other are calculated and stored. In the next step, after normalizing to 8-bit numbers, these data are moved by permutation operations and combined. In the following, the proposed method is used to increase the level of security and the ability to be random from the non-linear operations of 8-bit S-boxes S0 and S1 used in the CLEFIA block cipher. Statistical analyzes performed on the generated keys show the acceptable random nature of the keys. Therefore, the proposed structure for generating a random key can be used in encrypting digital signals with large volumes of data such as image and sound. [ABSTRACT FROM AUTHOR]

Multi-Input and Output Radar System (MIMO) is a new type of radar system that has been the subject of much research in recent years due to its many advantages. Meanwhile, the issue of target tracking in MIMO radar systems is of great importance, and providing an efficient solution for it remains an unresolved issue. In this paper, target tracking in MIMO radar systems using optimizing Kalman interactive filter is investigated. The proposed method in this research is the MIMO radar system for the simultaneous tracking of multiple targets. In the assumed system model, the interactive multiple model (IMM) based on Extended Kalman Filter (EKF) is used to understand the effective tracking of the target. Also, the optimization of the multi-objective tracking model in MIMO radar systems has been done by the proposed method using the particle swarm optimization (PSO) algorithm. This optimization algorithm estimates the fit of each studied response based on the number of energy resources and time consumed. The efficiency of the proposed method in a simulated environment has been evaluated and its performance in tracking multiple targets has been investigated in terms of different criteria. Based on the results of these experiments, the proposed method, in addition to reducing the amount of tracking error, can be effective in reducing energy consumption and reducing the sampling period. Thus, the proposed method will reduce resource consumption in the multi-objective tracking system. [ABSTRACT FROM AUTHOR]

In Network-on-Chip architecture, wired structure and multi-step communication increase consumption power and latency. Combining wired media for a regular transmission and high-bandwidth wireless media for multi-step communication is a way to reduce latency and consumption of power. Wireless nodes are prone to error in on-chip wireless networks due to their complexity and relatively high usage; they are also crowded due to their sharing between several nodes, but their job is to increase efficiency. However, the presence of wireless nodes in wireless networks on the chip increases the cost and area. Therefore, finding an optimal structure for communication between cores is necessary. In this paper, a new three-dimensional architecture for a Wireless Network on Chip is presented, which has two levels; depending on the location of the error in the second level, the wireless routers in the first level are assigned to the processing elements. The demand matrix is used to optimize different traffic patterns. The performance of 3D architecture has been compared under different traffic patterns. The obtained results show that the proposed structure has a relatively good performance and increases the network's reliability. [ABSTRACT FROM AUTHOR]

The ever-increasing of renewable distributed generation sources in distribution networks, as well as increasing network size, have faced agent-based protection schemes with a heavy communicational load. Accordingly, despite the fast and reliable nature of multi-agent systems, they have the possibility of improper performance, especially in centralized protection systems. This paper presents an intelligent self-healing method that has the ability to replace common multi-agent systems during fault conditions. Therefore, protection tasks are performed in a single control level, without dependence on higher communicational levels, to clear the fault. Decentralized operation of this structure is provided by using intelligent electronic devices and distributed communications. In this way, the proposed scheme is described with high-speed peer-to-peer communication capability using the IEC-61850 GOOSE protocol. Then, a penetration-free algorithm, without the help of a central controller, is provided by using GOOSE message capabilities, to prevent any electricity interruption due to insufficient protection settings. Finally, by planning different scenarios and simulating a practical distribution network via ETAP software, the accuracy of the proposed algorithm has been proven. [ABSTRACT FROM AUTHOR]

Nowadays, using telecommunication systems and advanced measuring devices underlies cyberattacks on electrical grids. Bad data injection and failure to detect it on time, cause drastic damage to the network. This paper presents a new method for bad data detection (BDD) in state estimating when a cyber attacker manipulates the important measurements. Therefore, the new attack index is defined by simultaneously manipulating the network parameters and injecting incorrect data into the measured values. For this purpose, considering the masking and swamping effect, the diagnostic robust generalized potential (DRGP) algorithm detected and isolated high-leverage measurements installed in important locations from low-leverage measurements. Then, the state estimation process performs using low-leverage measurements. The Generalized Studentized Residual (GSR) algorithm detects bad data. With simultaneous manipulation of network parameters and measurement values, conventional BDD methods are unable to detect an attack. To evaluate the performance of the proposed method, they were implemented on the IEEE standard 14-bus network using MATLAB and Rstudio software. The simulation results show the ability of the proposed algorithm to detect a bad data attack. [ABSTRACT FROM AUTHOR]

As social networks grow, they become more and more complex, and analyzing them becomes complicated. One way to reduce this complexity is to divide the network into subnets, which are also called communities. Dividing social networks into desirable communities can help analysts and experts to understand the behavior and function of the networks. Community detection in networks is a challenging topic in network science and various methods have been proposed for that. Modularity maximization is one of the state-of-the-art methods suggested for community detection. Modularity maximization is an NP-hard problem meaning that no polynomial-time algorithm exists that could solve the problem optimally unless P=NP. A group of approaches that could solve such problems is approximate algorithms. Identifying the influential nodes has many important applications in social networks. This technique could also be used in community detection. To maximize modularity, in this paper, we propose approximate algorithms based on identifying the influential nodes and their influence domain. We used the concept of scale-free networks to prove the approximate factor. Experiments on real-world networks show that the proposed algorithm can compete with the state-of-the-art methods of community detection algorithms. [ABSTRACT FROM AUTHOR]

This paper deals with the dynamic economic and emission dispatch during a day as an important challenge in engineering. On the other hand, renewable energy provides an undeniable contribution to the energy supply. Therefore, to create an efficient model, the probability wind energy models have been proposed. In principle, this problem has several limitations and to bring it to reality, practical and nonlinear constraints such as power balance, ramp rate, prohibited zone, non-smooth cost function, and production constraints have been considered. Since these functions i.e. emission, cost, and wind models are conflicting in nature, to solve this problem, a multi-objective virus colony search algorithm (VCS) based on Pareto theory has been proposed. To improve the performance of the virus colony search algorithm, the chaos theory has been employed that eliminates the weakness of the standard algorithm, ie the speed of convergence and increased number of iterations of the algorithm to achieve the optimal solution. Chaos theory refers to the nature of complex systems with unpredictable behavior. Using the stochastic properties of chaos system, Chaos theory can improve the quality of population distribution in search space and enhance algorithm convergence function. The fuzzy decision function is also used to select the best solution from the set of solutions. The proposed model and method are applied to different systems and in some cases are compared with other methods in the articles. The results show an improvement in the performance of the proposed algorithm. The results also show that the presence of renewable resources has reduced production costs and thus increased network security. [ABSTRACT FROM AUTHOR]

Generative models try to obtain a probability distribution that is similar to that of observed data. Two different solutions have been proposed in this regard in recent years: one is to minimize the divergence (distance) between the two distributions by maximizing the variational lower bound, and the other is to implicitly reduce the distance between the two distributions through adversarial processes. One of the problems in generative adversarial networks (GANs) is the mode collapse. Mode collapse is a phenomenon in which, for various inputs, the generative model generates low variety or similar images. This paper tries to provide a solution to the mode collapse problem proposing a novel method called variational generative adversarial networks (VGANs). This method exploits variational autoencoders to initialize GANs. In other words, in addition to maximizing the variational lower bound, it also implicitly reduces the distance between the two distributions. Experimental results show that this method can deal with the mode collapse problem better than the state-of-the-art. Moreover, in the qualitative analysis, according to a survey of 136 people on the authenticity of the generated images, the proposed method can generate images more similar to real ones. [ABSTRACT FROM AUTHOR]

The Josephson junction is a device consisting of two superconducting electrodes connected by a weak junction such as a thin insulation coating. The Josephson junction has chaotic behavior parameters not desirable in high-frequency applications. In this paper, a model predictive control approach based on an ant colony optimization algorithm is proposed to synchronize two Josephson junction models with different parameters. Here, the Josephson junction is described with a nonlinear model, and the synchronization is obtained using the slave-master technique. For this purpose, an appropriate objective function is defined to assess the particles within the state space. This objective function minimizes simultaneously the tracking error, control effort, and control smoothness. The dynamic optimization problem is solved using an ant colony optimization algorithm. Numerical simulations are conducted to assess the efficiency of the proposed algorithm. Also, a Monte Carlo evaluation is achieved to compute the statistic performance of the suggested controller. In addition, sensitivity analysis to changes in the number of ants and the number of iteration of the inner loop of the algorithm was performed. The results show that the controller is significantly sensitive to reducing the number of iteration of the inner loop. [ABSTRACT FROM AUTHOR]

The review of the literature survey of transient stability constrained optimal power flow (TSCOPF) shows that only mechanical input power is used as a key parameter in the energy sensitivity approaches while generator's voltage changes are not considered. Using AC-OPF, this paper considers the effect of generator voltage changes in the calculation of energy sensitivity. To evaluate the transient stability, a new index from the family of corrected hybrid techniques is proposed and applied. It is shown that the change of the proposed index against the mentioned key parameters is linear. Thus, to reduce the computational burden of the approach, this linear property is considered to define the transient stability constraint. The proposed framework is implemented on the New England 39-bus test network. A comparison of the obtained results with those in the literature survey shows that using the proposed approach, the operation cost is decreased from 61799.68 ($/h) to 60927.86 ($/h) which achieves 1.41% saving in the fuel cost while securing the network against considered contingency. [ABSTRACT FROM AUTHOR]

The choice of a mathematical model of eye movement has had a significant impact on scientific research. This research resulted in a controlling robotic arm that could follow the movement of the human eye and thoroughly examine the structure of the human eye. Exploring the previous models, a model equivalent to a robot with two degrees of freedom is presented. Then, by designing and simulating an optimal linear square controller on the desired system, we could model an eye robot. The purpose of tracking is to target the system, which is shown by simulating this controller. This paper describes how to design a fuzzy controller for the system by presenting the simulation results. Finally, the performance of the two control methods in non-zero initial conditions, rapid eye movements, and uncertainty in the model system constructions are compared. The simulation results show that despite the system control provided by both control methods, the fuzzy control method has a better performance for tracking fast eye movements. This method is resistant to modeling uncertainties by using the qualitative behavior of the system instead of its exact mathematical model. Also, the smaller volume of simulation of control inputs in the fuzzy controller will significantly reduce costs by using this controller. [ABSTRACT FROM AUTHOR]

In this paper, a new fractional-order fuzzy controller named proportional fuzzy ا integral fuzzy + deferential fuzzy (FP + Fla + FDp) is proposed. The proposed controller is single gain, integrate, derivative and fractional order in its structure. The controller has a structure with two adjustable fractions and is simply designed. This controller performs the stability process in a short time. The response time can also be changed by adjusting the coefficient of time scale a and p, which makes it more flexible and efficient compared to the classic PID controller. On the other hand, in the design of the proposed controller, the optimal adjustment of the controller gain and fuzzy members has turned into an optimization problem, which is done by a hybrid algorithm based on the vcs and the HBC colony (ABC) based on a function in the time domain. In the proposed hybrid algorithm, attempts have been made to take advantage of local and final search as the strengths of these controllers to dramatically reduce the possibility of locating in local points. Investigations of different load variation scenarios, better performance of the proposed controller facing load disturbances from the root mean square, rise and fall time, will show the number of oscillations, and the fall time of the frequency changes. [ABSTRACT FROM AUTHOR]

A parallel connection of Buck converters improves system reliability and efficiency. However, the open circuit fault, load, and supply voltage uncertainties, and interactions among the converters increase the complexity of output voltage control and balanced current sharing. Thus, in this paper, first, a decentralized backstepping sliding mode control strategy is designed to meet such challenges. However, this controller is quite conservative since the uncertainties and interaction bounds are not known. Moreover, the sliding mode based conti'ollers suffer from chattering phenomena which limits the practical applications. Therefore, a decentralized adaptive backstepping control strategy with wavelet neural network approximators is proposed. This strategy reduces the chattering and approximates the uncertainties and interactions by replacing the switcliing terms with wavelet neural networks. To show the effectiveness of the proposed controller, different numerical simulations have been performed in the presence of reference voltage changes, load, supply voltage variations, and open circuit faults. [ABSTRACT FROM AUTHOR]

This paper presents a control method based on model predictive control (MPC) to control the buck-type dynamic capacitor (DCAP) to improve power quality. In this method, the reference current consists of two distinct parts, i.e., reactive power compensator (RPC), and hai'monic current eliminator (HCE) and based on the load current and dynamically, it adapts itself to load changes. The proposed prediction model (PM) was extracted from the linearized differential equations of the DCAP. In the proposed method, vector decision variables in each cycle converter switching are updated only once during the prediction horizon, and the optimization problem related to predictive control is solved based on the particle swarm optimization (PSO) algorithm. This reduces the volume of calculations significantly. By considering the total harmonic distribution (THD) value and the power factor (PF) value, the prediction horizon is proposed. The proposed method, unlike the EHM method, has fewer control parameters and can be implemented more easily. The simulation results in MATLAB software showed the superiority of the proposed method in comparison with the EHM method on a single phase DCAP. [ABSTRACT FROM AUTHOR]

This paper presents a new method for studying brain functional connectivity using multichannel scalp EEG signals. The proposed method uses the values of pair-wise phase synchrony between different EEG channels as a measure to quantify the strength of the connection between different parts of the brain. Using these values, the resulted brain networks are visualized by the use of graph theory. The method is then deployed to explore brain functional connectivity in newborn EEG signals in the presence of burst and suppression patterns. The results show that the brain networks are sparser in the presence of burst patterns compai'ed to suppression patterns. They also show that the links in brain networks representing suppression patterns have greater strength. To validate the proposed method, the graphs describing burst and suppression patterns are classified. The results show that the brain networks for burst and suppression patterns are statistically different. The findings of this study show that the proposed method can be used to study brain functional connectivity in the presence of other abnor-malities. [ABSTRACT FROM AUTHOR]

Wireless sensor network (WSN) is a set of spatially distributed sensors with the predetermined or randomly structure. Coverage, as an important performance indicator of WSNs, is subdivided into three classes of target coverage, area coverage and barrier coverage. This paper investigates problems of target and area coverage for a randomly distributed WSN. To this end, the analytical algorithm of steepest descent (SD) with Armijo and Wolf rules is suggested as a new solution for target coverage, and the SD algoi'ithm along with evolutionary Genetic and Shuffled Frog Leaping algorithms (GA and SFLA) are utilized for the maximization of area coverage. According to the results of performance evaluation over different scenarios, it is confirmed that utilizing SD algorithm for the target coverage could increase the coverage accuracy and reduce the computational complexity compared witli the evolutionary method the GA. Moreover, the SD algorithm can manage sensors movement towards targets. Furthermore, in the case of area coverage, the results reveal that SFLA provides more coverage accuracy in comparison with the GA although this improvement leads to more complexity of the SFLA. [ABSTRACT FROM AUTHOR]

Predicting the status of power grid components, especially overhead lines in response to extreme weather event, plays an important role in planning pre-resource allocation, as well as restoring loads more quickly at a faster time which can improve the power grid resilience. In this paper, a Multi-dimensional Support Vector Machine algorithm is proposed to predict outage overhead lines assuming storm paths. In this model, dimensions are based on five distinct features: the distance from building, distance from tree, distance from center of storm, storm speed and cable type. The result of the proposed model is the classification of overhead lines status into two out and operational statuses implemented on the 33-bus IEEE network. The results show that the proposed model predicts outage lines with high accuracy. [ABSTRACT FROM AUTHOR]

The stochastic neuron has great importance in neural networks and is one of the most important subjects in machine learning algorithms. Hardware implementation of neural networks has always been of interest to researchers and can significantly increase the performance and applications of neural networks. Hence hardware implementation of the stochastic neuron is also important. In this paper, utilizing stochastic behavior of MTJs in subcritical current regime a hardware model for stochastic neurons is proposed. Using HSpice tool, the proposed model was simulated and simulation results show that the proposed model functionality is similar to the mathematical description of the stochastic neuron and the error of this model is always less than 4.8٥/٠ compared to the mathematical description of the stochastic neuron. Also using corner simulation, it was shown that this model performs properly even in the presence of process variation and its error rate is less than 15.46٥/o and 17.43٥/٠ compared to the mathematical model and ideal simulation, respectively. [ABSTRACT FROM AUTHOR]