Search

Deposition of a consistent diamond coating on intricate surfaces has historically posed a difficulty. This article presents the advancement in research on depositing a uniform diamond coating on three-dimensional (3D) silicon spheres, utilizing a faraday cage within a microwave plasma chemical vapor deposition (MPCVD) reactor. A self-consistent three-dimensional multi-physics field model has been established for simulating the microwave electric field and plasma inside a reactor with or without a faraday cage. Results indicate the cage effectively reduces the discharge at the top of the silicon sphere and improves uniformity of the distribution of the microwave electric field and plasma electron density on the sphere's surface. MPCVD trials have demonstrated that a powerful discharge takes place at the apex of the silicon sphere resulting in an excessive thermal gradient if the cage is not added. The apex of the silicon sphere is covered with a blend of diamond and graphite phases. Due to the excessive internal stress of the coating, approximately 50 % of the samples experience coating detachment. After the addition of the cage, the strong discharge is transferred to the top of the cage, effectively suppressing the microwave electric field and plasma inside the cage. Improved quality, reduced internal stress, and enhanced uniformity of the polycrystalline diamond coating are achievable on the silicon spheres within the cage. Moreover, this technique offers a novel approach to coat diamond on complex 3D geometries. [Display omitted] • Three-dimensional multi-physics modeling verifies that faraday cage suppresses microwave electric field and plasma. • The Faraday cage improves the uniformity of the distribution of microwave electric fields and plasma in the internal space. • Uniform, high crystal quality, low stress diamond coating. [ABSTRACT FROM AUTHOR]

Diamond is a highly attractive material for many applications in material science, engineering, chemistry, and biology because of its favorable properties. The preparation of large-area freestanding diamond plate can greatly reduce the production cost of diamond and promote the industrialization of diamond. In this study, the dual-magnetic field mode was introduced to optimize the magnetic field distribution in direct current arc plasma jet chemical vapor deposition (DC Jet CVD) system, and the arc plasma was effectively controlled under the coupling of electric field and magnetic field. The uniformity of the plasma distribution above the substrate surface is significantly improved, resulting in long-term stable and uniform growth of the 8-inch freestanding diamond plate. The influence of dual-magnetic field mode on magnetic field generation, arc feature, and reactive group distribution was studied. 8-inch freestanding diamond plates with an average thickness of 2.8 mm were prepared by dual-magnetic controlled DC Jet CVD. The results showed that the 8-inch diamond plate preferred a high (220) orientation, and the deviation of thickness of which was around 10 % of the averaged values. Raman spectroscopy of diamond revealed a 6.6 cm−1 of full width at half maximum (FWHM) and calculated 1.20 GPa compressive stress in the 8-inch diamond plate. By means of mechanical and thermal property measurements, the large area diamond plate shows a robust structure with the average values of three-point bending fracture strength of 987.2 MPa, and extremely high thermal conductivity of 1797.8 W/(m·k) as well. The deviation of three-point bending fracture strength and the thermal conductivity over the 8-inch diamond plate was around 7.9 % and 12.6 % of the respective averaged values. [Display omitted] • A uniform and robust 8-inch diamond plate was prepared using a dual-field DC arc CVD system. • The average three-point bending fracture strength of the 8-inch diamond plate was 987.23 MPa, and the average thermal conductivity was 1797.80 W/(m•K). • The effect of dual magnetic field mode on the distribution of arc morphology and arc plasma groups was analyzed using a high-speed camera and filter. [ABSTRACT FROM AUTHOR]

Slightly graphitization might be incurred on CVD diamond films when suffering instantaneous high temperature thermal shock. In this paper, phase transitions of CVD free-standing diamond films have been studied experimentally at the temperature range of 1500–1800 °C through a plasma rapid heating process. Raman spectra and X-ray photoelectron spectra (XPS) are compared and discussed for the purpose of measuring the percentage of graphitic carbon component in CVD diamond films after heat treatment at different temperatures. An obvious optical degradation took place in both visible and infrared bands with the increased treating temperature. The result indicates that graphitization is dominated along grain boundaries rather than in internal grains. In addition, the nitrogen related absorption peaks were not covered by the enhanced optical absorption background, which was caused by the opaque graphitic carbon formed at high temperature. Nitrogen concentrations have also been evaluated for these graphitized diamond films and there is no evidence to show the movement or aggregation of nitrogen atoms. [ABSTRACT FROM AUTHOR]

The CVD diamond films at different growth stages were prepared on the same substrate by DC arc plasma jet CVD. The surface morphologies and residual stress of diamond films were characterized by scanning electron microscope and Raman spectroscopy. The intrinsic stress of diamond films were obtained by subtracting thermal stress from residual stress. The results showed that the intrinsic compress stress was 0.42 GPa for the precoalescence stage due to the sp 2 carbon inclusions in diamond islands. With the diamond islands growing up and even snapping together to form grain boundary at the coalescence stage the intrinsic compress stress was 0.06 GPa. Eventually, the diamond islands coalesced into a continuous polycrystalline film, the intrinsic compress stress vanished and converted to tensile stress, the intrinsic tensile stress reached 1.41 GPa due to the number of grain boundaries increasing. The evolution of intrinsic stress during diamond film initial growth was mainly attributed to the surface free energy of diamond islands changed to the free energy of grain boundaries which was consistent with the Nix-Clemens model. [ABSTRACT FROM AUTHOR]

Polycrystalline CVD free-standing diamond films have been heat treated through a rapid heating process using a direct current (DC) arc plasma jet system within the temperature range of 1500–2000 °C. The optical transmission of the diamond film decreases when the treatment temperature exceeds 1500 °C. When the diamond film was annealed to 1800 °C for just 1 min, the infrared (IR) transmittance at λ = 10.6 μm of the film was significantly decreased from 60.5% to 4.0%, due to the transformation from diamond to graphite. Further increase of the temperature to 2000 °C leads to complete loss of optical transmittance in only 30 s, due to the detrimental occurrence of graphitization. XRD patterns indicate that graphite ultimately grows preferentially along the (0002) plane by forming disordered or turbostratic graphite as intermediate product. Raman spectra and SEM images verify that at 1500–1850 °C graphitic carbon transforms from the diamond surface in the form of protruding submicron crystallites, which were still containing a number of sp 3 C C bonds. In addition to graphitization on the external surface, the diamond-graphite phase transition also occurs along the grain boundaries and the calculated activation energy of the grain boundary graphitization process is 276 kJ·mol − 1 for the CVD diamond. [ABSTRACT FROM AUTHOR]

In order to realize the practical use of diamond as a semiconductor material, large-area single-crystal diamond wafers with uniform quality are required. Mosaic growth is an effective method to produce inch-grade single-crystal diamonds. However, the quality of the wafer is limited by the junction interface seriously, because cracking occurs easily due to the high internal stress. In this paper, the repetition growth method was adopted to grow mosaic splicing single-crystal diamond without polycrystalline diamond interface. The high-quality single crystal diamond slices were reduplicated by microwave plasma chemical vapor deposition (MPCVD). The substrates were obtained by cutting a piece of CVD diamond along a plane perpendicular to 〈001〉 (with a (100)-oriented surface). The evolution of the growth characteristics around the junction of the substrates at different stages was studied. The results show that the surface of the epitaxial layers gradually evolves from blurry terraces to a regular well-ordered step flow. When the substrates have the same deviation direction and the off-direction angles are within 3°, the junction of the substrates can connect smoothly. Raman mapping shows that there is a mixture of tensile stress and compressive stress near the junction. As the thickness of the epitaxial layer increases from 280 μm to 560 μm, the range of tensile stress near the joint area expands from 85 μm to 150 μm, the maximum tensile stress increases from 0.08 GPa to 0.16 GPa. In addition, the value of FWHM in the X-ray rocking curve is less than 2.80 cm−1 around the junction, which indicates good crystal quality. [Display omitted] • The evolution of growth characteristics around the junction in the mosaic diamond was studied. • The mosaic boundary evolved from blurry terraces to a well-ordered step flow and finally connected. • The lowest value of tensile stress near the joint area was reported as the film thickness increased. • The larger FWHM of Raman peak around the junction is caused by the increased tensile stress. • The "inherit" effect of NV content of the epitaxial layer was observed for the corresponding substrate. [ABSTRACT FROM AUTHOR]