Search

Due to the serious problems with energy efficiency, carbon emissions, and thermal comfort of rural residences in northern China, an optimization of active and passive heating technologies for rural residences is necessary. In this paper, an optimization for rural residences in northern China is conducted with four objectives: the whole life cycle carbon emission; the annual energy consumption through heating, ventilation, and air conditioning systems; the annual cost; and thermal comfort. In addition, the optimization model with active–passive heating technology synergy is resolved by NSGA-II genetic algorithm. The active and passive design variables, including the type of air source heat pump, orientation, the type and thickness of envelope insulation, the layer of window glass, the window-to-wall area ratio, as well as sunspace parameters are preferred to obtain the optimal solution. The results indicate that the optimal solution obtained by the ideal point method gives the most outstanding performance. Compared with the prototype, the optimized carbon emissions in severe cold and cold regions decreased by 56.1% and 54.6%, respectively. The annual energy consumption decreased by 59.7% and 62.2%. Finally, the roof insulation thickness is the most sensitive design variable in Pareto-optimal solution sets. This paper offers significant guidance in the application of the optimization method of active–passive technology synergy to the energy-saving design of buildings. [ABSTRACT FROM AUTHOR]

This paper discusses and reviews the main real gas effects on the thermodynamic performance of closed Brayton cycles. Cycles with carbon dioxide as working fluids are taken as a reference and a comparison of the thermodynamic cycle efficiencies that are made with other possible working fluids (pure fluids and fluid mixtures). We fixed the reduced operating conditions, in optimal conditions, so that all working fluids had the same thermodynamic global performances. Therefore, the choice of the working fluid becomes important for adapting the cycle to the different technological requirements. The positive effects of the real gas properties in supercritical cycles were approximately maximal at reduced minimum cycle temperatures of about 1.01 to 1.05, with maximum to minimum cycle temperatures of about 2.2. The use of mixtures furthers widens the application of the field of closed Brayton cycles, thereby allowing a continuous variation in the critical temperature of the resulting working fluid and, in some cases, also making it possible to take the condensation with a significant further increase in the thermodynamic cycle efficiency. The paper also demonstrates the thermodynamic convenience of resorting to mixtures of carbon dioxide and inert gases. Extensive measurements of vapour–liquid equilibria and analysis of the thermal stability and material compatibility are essential for a practical and full use of the real gas Brayton cycles. [ABSTRACT FROM AUTHOR]

Agricultural mechanization is an important factor to improve the green total factor productivity of the planting industry, which is the key way to realize the sustainable development and high-quality development of agriculture. Based on the panel data of 30 provinces in China from 2001 to 2019, this paper uses the stochastic frontier analysis method of the output-oriented distance function to measure the green total factor productivity of China's planting industry based on net carbon sinks, and empirically studies the impact of agricultural mechanization on the green total factor productivity in China's planting industry. The main findings of this paper are as follows: (1) Agricultural mechanization can promote the planting green total factor productivity significantly, and this basic conclusion is still robust after using instrumental variables and sub sample regression. (2) The path of agricultural mechanization on planting green total factor productivity is mainly reflected in technology progress and spatial spillover, while the mechanisms of operation scale expansion, factor allocation optimization and technical efficiency change are not significant. (3) With the improvement in the mechanization level, the promotion effect of mechanization on planting GTFP will become clearer. Given these findings, the paper adds considerable value to the empirical literature and provides various policy and practical implications. [ABSTRACT FROM AUTHOR]

Natural gas hydrate is one of the most important clean energies and part of carbon cycle, due to the least carbon content. Natural gas hydrates depend on high pressure and low temperatures, located under seabed or permafrost. Small changes in temperature and pressure may lead gas hydrates to separate into water and gas, commonly as methane. As a powerful greenhouse gas, methane is much stronger than carbon dioxide. Therefore, it is necessary to detect the gas hydrates stable zone (GHSZ) before the methane gas escapes from GHSZ. Marine controlled source electromagnetic method (CSEM) is a useful tool to detect gas hydrate in offshore. The results from 3D CSEM method are a resistivity cube to describe the distribution of gas hydrates. In order to study the detectability of CSEM method, we simulate the sensitivity and resolution of marine CSEM synthetic data. By using the sensitivity and resolution, a simple statement may be quickly judged on the existence and occurrence range of the natural gas hydrate. In this paper, we compare the resolution of marine CSEM method with various transverse resistance. This information may help researchers find out whether the GHSZ exists or not. [ABSTRACT FROM AUTHOR]

China has committed to ambitious targets to reduce its carbon emissions in the next decades, in order to combat climate change and improve the environment. The realization of the targets depends on the fair and effective mitigation plans of all provinces. However, with varying ecological and environmental conditions and social-economic development, it is a critical issue to quantify the provinces' efforts equally. This paper proposed a comprehensive fE index in coordinating ecology, equity and economy, by accounting for carbon emissions and sinks to characterize provincial carbon emission status in China, from 2000 to 2017, which shows a spatial pattern of "boundary high, central low". The provinces with higher fE value (>1.5) in boundary areas can be seen as "relative equality" provinces with good ecology circulation, equity and economic efficiency. The provinces with lower fE value (<0.7) in central areas around Bohai Bay are regarded as "severe inequality" provinces, and are identified as the hot-spot provinces, which have emitted more CO2 than their equity share by occupying the carbon emission space of other provinces in recent decades. These results could provide a reference for a provincial guide for carbon reduction and sustainable development of the low-carbon economy. [ABSTRACT FROM AUTHOR]

The Cretaceous Era has always been a focus of geologic and palaeoenvironmental studies. Previous researchers believed that the impact of the global carbon cycle represents significant short-term global biogeochemical fluctuations, leading to the formation of a large number of organic rich sediments in the marine environment. During the Turonian, a large number of organic-rich oil shales were deposited in the lakes of the Songliao Basin in the Qingshankou Formation. How the depositional environment affected the formation of oil shales in continental lakes and the characteristics of these oil shales remain controversial. In this paper, through sampling of Qingshankou Formation strata, various testing methods are used to provide a variety of new data to study the characteristics of oil shales and palaeoenvironment evolution history in the Songliao Basin. The research of the sediments in the Qingshankou Formation in the Fuyu oilfield, Songliao Basin, via result analysis revealed that the oil shales possess an excellent oil-generation potential with moderate-high total organic carbon (TOC) levels (0.58–9.43%), high hydrogen index (HI) values (265–959 mg hydrocarbons (HC)/g TOC), high extractable organic matter (EOM) levels (2.50–6.96 mg/g TOC) and high hydrocarbon fractions (48–89%). The sources of the organic matter were mainly zooplankton, red algae and higher plants (including marine organisms). The aqueous palaeoenvironment of the Qingshankou Formation was a saline water environment with a high sulfate concentration, which promoted an increase in nutrients and stratification of the water density in the lake basin. Oxygen consumption in the bottom water layer promoted the accumulation and burial of high-abundance organic matter, thus forming the high-quality oil shales in the Qingshankou Formation. The global carbon cycle, warm-humid palaeoclimate, dynamic local biogeochemical cycling and relative passive tectonism were the most likely reasons for the TOC increase and negative δ13Corg deviation. [ABSTRACT FROM AUTHOR]

To study the impact of the promotion of electric vehicles on carbon emissions in China, the full life carbon emissions of electric vehicles are studied on the basis of considering such factors as vehicle weight and grid mix composition, and fuel vehicles are added for comparison. In this paper, we collect data for 34 domestic electric vehicles, and linear regression analysis is used to model the relationship between vehicle weight and energy consumption. Then, a Hybrid Life Cycle Assessment method is used to establish the life cycle carbon emission calculation model for electric vehicles and fuel vehicles. Finally, the life cycle carbon emissions of electric vehicles and fuel vehicles under different electrical energy structures are discussed using scenario analysis. The results show that under the current grid mix composition in China, the carbon emissions of electric vehicles of the same vehicle weight class are 24% to 31% higher than that of fuel vehicles. As the proportion of clean energy in the grid mix composition increases, the advantages of electric vehicles to reduce carbon emissions will gradually emerge. [ABSTRACT FROM AUTHOR]