Search

The damper used for the control of airflow in heating, ventilation and air conditioning systems can constructively be adapted to measure the air velocity with its moment characteristic. It is a device that indirectly determines the air velocity by measuring the position of the blades and the air stream moment acting on it. The subject of this paper is energy consumption of the air torque position damper depending on its structure. The aim is to compare the energy consumption of four possible types of dampers with non-cascading blades: with one blade, with two cross-guided blades, with two parallels-guided blades and with two blades, one of which is a measuring blade and the other remains fixed in horizontal position. The case when there is a straight section of a duct both in front of and behind the damper was considered. Adequacy of the existing mathematical model and energy consumption for all four types of dampers was determined experimentally. It was found that the damper with two blades of which one is a measuring blade and other remains fixed in horizontal position had minimal energy consumption. [ABSTRACT FROM AUTHOR]

The paper presents the results of the analysis of the impact of various ventilation systems on the energy consumption performed for one Polish museum building that was built in 1929–1930. Simulations were carried out with the use of two computer codes: CONTAM and ESP-r. Multi-zone models including the exhibition rooms and the staircase were prepared. The simulations were made of synthetic weather data for one of the Polish towns for two months of the heating season. Twenty-four hour variability of internal heat gains was taken into account. The results show clearly that the natural ventilation system (which is currently used in the building) enables the air exchange with fresh air on the first floor only. The air infiltration on the upper levels is close to zero. Rebuilding the ventilation system generates changes in the energy demand of the building. It is presented how the heat demand increases with the increase of the ventilation air flow and what is the impact of the air infiltration on the heat demand for different variants of ventilation. [ABSTRACT FROM AUTHOR]