Search

Envelope systems are the main contributors to the energy consumption associated to cooling or heating buildings. There have been significant research efforts to improve the performance of building envelope systems by integrating passive cooling strategies to reduce cooling loads and maintain acceptable indoor thermal comfort. The ventilated wall cavity system is one of these passive-cooling strategies that have received considerable attention recently due to the significant benefits of reducing thermal loads of buildings. In particular, evaporative cooling inside ventilated wall cavities is an attractive passive cooling technique especially in hot and dry climates. This paper presents the initial findings of a current research study focusing on improving the ventilated wall cavity with spray evaporative cooling system that produce fine water droplets. Specifically, this paper describes a numerical modeling approach to evaluate the performance of the proposed passive cooling system to cool buildings in hot and dry climates. The simulation results suggest that a significant reduction in cooling loads can be achieved since the wall cavity can absorb heat from the indoor and outdoor while inducing acceptable supply air temperature capable of maintaining indoor thermal comfort within buildings. [ABSTRACT FROM AUTHOR]

This paper provides a comparative study of the energy efficiency of a conventional ventilating and air conditioning (VAC) system with three configurations. This system was used to cool an experimental room in an office building in more control scenarios realised by adopting different cooled water temperatures and chiller cooling systems. In this purpose, an air–water mist cooled system for an air-cooled chiller is proposed. Depending on the components, the analysed VAC system has the following configurations: (1) air handling unit (AHU) and fan-coil units (FCUs); (2) air handling unit (AHU); and (3) heat recovery unit (HRU) and fan-coil units (FCUs). The electricity consumption weight of the equipment of each VAC system, the total energy consumption and the influence of control parameters on this consumption are analysed. The results of the experiments indicate that the optimal efficiency VAC system in office buildings includes an AHU and FCUs with an air–water mist cooled chiller and a cooled water temperature of 8 °C. For this system, a mathematical model is developed to minimise the electricity consumption by optimal control, where the consumption depends only on non-controlled parameters (solar radiation intensity and outdoor air temperature). This model is verified with actual measurements to confirm its accuracy, and a good agreement between the prediction and measurement is achieved. Additionally, the assessment of thermal comfort in the experimental office is performed based on the PMV-PPD model using the ASHRAE Thermal Comfort programme. The obtained results demonstrate that the AHU&FCUs system assures an increase in thermal comfort. Finally, a TRNSYS simulation model of energy consumption and PMV-PPD indices for the AHU&FCUs system is developed and experimentally validated. [ABSTRACT FROM AUTHOR]