Search

Abstract: This paper aims to explore how and where phase change materials (PCMs) are used in passive latent heat thermal energy storage (LHTES) systems, and to present an overview of how these construction solutions are related to building''s energy performance. A survey on research trends are firstly presented followed by the discussion of some physical and theoretical considerations about the building and the potential of integrating PCMs in construction elements. The different types of PCMs and main criteria that govern their selection are reviewed, as well as the main methods to measure PCMs’ thermal properties, and the techniques to incorporate PCMs into building elements. The numerical modeling of heat transfer with phase-change and heat transfer enhanced techniques are discussed, followed by a review of several passive LHTES systems with PCMs. Studies on dynamic simulation of energy in buildings (DSEB) incorporating PCMs are reviewed, mainly those supported by EnergyPlus, ESP-r and TRNSYS software tools. Lifecycle assessments, both environmental and economic are discussed. This review shows that passive construction solutions with PCMs provide the potential for reducing energy consumption for heating and cooling due to the load reduction/shifting, and for increasing indoor thermal comfort due to the reduced indoor temperature fluctuations. [Copyright &y& Elsevier]

Abstract: This paper investigates design features that can potentially reduce the energy consumed in attaining appropriate thermal comfort levels in typical residential buildings. A numerical model coupled with a PID controller is developed to predict the indoor air temperature that is adjusted via mechanical ventilation. The model is used to simulate and evaluate various scenarios of building wall layouts and materials. From the various simulation runs, the wall configurations and materials were refined to combinations that rendered the mechanical ventilation a feasible option for attainment of comfort for the largest number of hours per year. The runs were conducted for a typical residential apartment located in the city of Beirut, Lebanon, which is characterized by mild coastal climatic conditions. Different wall configurations were assumed for each of the living zone and the bedroom zone of the apartment. The simulation results suggest an optimal wall configuration comprised of a 5cm layer of insulating strawboard sandwiched between a 2cm×10cm wall made of masonry units consisting of Hempcrete (mixture of Portland cement, aggregates, and industrial hemp fibers) for the living zone, whereas the wall for the bedroom zone consists of a 10cm of Hempcrete. [Copyright &y& Elsevier]