Search

Highlights • The Primary Heat Transfer System of the HCPB Breeding Blanket for the DEMO reactor has been preliminary designed. • A thermo-hydraulic assessment of Ex-Vessel PHTS has been carried out in order to size its main components. • Results show that HCPB BB PHTS is characterized by large IHXs heat transfer area, high coolant inventory, huge pumping power. • Further efforts are needed to reduce PHTS pressure drops and volumes as well as to improve IHXs performance. Abstract The European DEMO conceptual design foresees four Breeding Blanket (BB) concepts that rely on different cooling and breeding technologies. As DEMO has been conceived to deliver net electricity to the grid, the choice of the blanket coolant plays a pivotal role in the reactor design having a strong influence on plant operation, safety and maintenance. Moreover, the machine pulsed operation makes the BB Primary Heat Transfer System (PHTS) the main hub of the DEMO Balance of Plant (BoP). Within this framework, a study has been carried out to design the Ex-Vessel PHTS of the Helium-Cooled Pebble Bed (HCPB) BB concept. The paper describes criteria and rationale followed with the aim to achieve a simple PHTS design based on the adoption of easy-to-manufacture main components. Results of preliminary thermal-hydraulic calculations carried out to size heat exchangers, piping and compressors are presented and critically discussed. Finally, the evaluation of PHTS key parameters as total pressure drops and total coolant inventory is reported to provide input relevant to the assessment of the impact of helium technology on the design integration and feasibility of DEMO BoP. [ABSTRACT FROM AUTHOR]

Abstract The state of EU DEMO Balance of Plant as for the end of 2016 is described in this paper. Starting with 6 outboard and 3 inboard cooling loops, the thermal energy of the helium is transferred by an intermediate heat exchanger to the solar salt, which transports it out of the tokamak building to the energy storage system, which is actually an industrial 2-tanks design. Heat is transferred from solar salt to the feedwater in the steam generator where it boils and becomes superheated before entering the steam turbine. The steam turbine design follows state-of-the-art concept, but it is not finally optimized, since further DEMO BoP design changes still cannot be excluded. The other 3 usable heat sources (two from divertor and one from vacuum vessel) are used to heat-up the feedwater on the return line to the steam generator, thus contributing to the efficient utilization of heat produced during DEMO operation. Taking into account pulse/dwell times of 2.0/0.5 h, DEMO can operate permanently under ∼80% power thus allowing flexible and continuous plant operation. EBSILON® results are presented for steady-state conditions including both pulsed and dwell time periods. [ABSTRACT FROM AUTHOR]

The first wall (FW) of DEMO is a component with high thermal loads. The cooling of the FW has to comply with the material's upper and lower temperature limits and requirements from stress assessment, like low temperature gradients. Also, the cooling has to be integrated into the balance-of-plant, in a sense to deliver exergy to the power cycle and require a limited pumping power for coolant circulation. This paper deals with the basics of FW cooling and proposes optimization approaches. The effectiveness of several heat transfer enhancement techniques is investigated for the use in helium cooled FW designs for DEMO. Among these are wall-mounted ribs, large scale mixing devices and modified hydraulic diameter. Their performance is assessed by computational fluid dynamics (CFD), and heat transfer coefficients and pressure drop are compared. Based on the results, an extrapolation to high heat fluxes is tried to estimate the higher limits of cooling capabilities. [ABSTRACT FROM AUTHOR]