Search

This paper develops a coordination control strategy for wind farms with line commutated converter-based HVdc delivery for participating in inertial response and primary frequency control. The coordination philosophy is to feedback the grid frequency and its derivative and adjust the delivery power of the HVdc link according to the feedback signals. The feedback loop employing the derivative of the grid frequency aims to improve the inertial response while the feedback loop employing the grid frequency deviation introduces a droop at the rectifier control loop. When the grid frequency is too high or too low, active power flow through the HVdc link will be ramped down or up. In turn, the wind generation will increase or decrease the blade angles to reduce or increase the captured wind power through pitch control. A case study demonstrates the effectiveness of the inertial enhancement and frequency droop in HVdc control. Simulation results in transient security assessment tool are given. [ABSTRACT FROM AUTHOR]

Doubly fed induction generator (DFIG) still shares a large part in today's wind power market. It provides the benefits of variable speed operation cost-effectively, and can control its active and reactive power independently. Crowbar protection is often adopted to protect the rotor-side voltage source converter (VSC) from transient overcurrent during grid voltage dip. But under unbalanced grid voltage condition, the severe problems are not the transient overcurrent, but the electric torque pulsation and dc volt- age ripple in the back-to-back VSCs. This paper develops dynamic models in MATLAB/Simulink, validates it through experiments, investigates the behavior of DFIG during unbalanced grid voltage condition, and proposes new controllers in separated positive and negative sequence. Methods to separate positive and negative sequence components in real time are also developed, and their responses to unsymmetrical voltage dip are compared. Simulation results prove that the separated positive and negative sequence controllers limit the torque pulsation and dc voltage ripple effectively. [ABSTRACT FROM AUTHOR]