Search

In many hydrological studies and applications, it is desirable to know the absorption property of water bodies. In order to derive this inherent optical property of waters from remote sensing reflectance, a multiband quasi-analytical algorithm (QAA) was calibrated and validated for the highly turbid water of Taihu Lake in China. A data set collected on November 8, 2007. from Meiliang Bay of Lake Taihu was first used to calibrate a regional QAA algorithm for this area, and other two independent data sets, which were collected on August 22, 2006, and November 10, 2008, forum the same area, were used to further validate the local algorithm. By shifting the reflectance wavelength from the red region to near infrared, the local QAA algorithm works well for this highly turbid water, the percent difference between the derived and measured absorption coefficients is less than 20% for all 13 samples in the data set of 2007, and most of them are less than 10%. The regional calibrated algorithm also has great result in deriving the absorption for the data set of 2008. However. the performance of the local algorithm also has various seasonal properties. It failed in deriving absorption for the data set of August 2006, unless the reference wavelength is shifted to even more long ones. It has been suggested in this paper that the seasonal and regional information is necessary for using the QAA algorithm in different optical property waters. [ABSTRACT FROM AUTHOR]

A new approach is presented in this paper to produce Digital Elevation Model (DEM) in mountainous areas with steep slope using ERS-½ tandem data. In order to reduce the impact of phase errors on the Interferometric Synthetic Aperture Radar (InSAR)-generated DEM, an external DEM such as that from Shuttle Radar Topography Mission (SRTM) is utilized in this approach. The proposed algorithm includes two steps: The first step is to model and remove phase trends with a linear regression analysis before converting phase to height; the second step is to filter unreliable height points before interpolating the DEM from the InSAR height map. The critical points are the following: 1) determining the one-to-one correspondence between the interferogram and the SRTM DEM before knowing the InSAR-derived elevation values and 2) estimating the elevation range of every pixel from SRTM DEM. To solve the first problem, an iteratively geocoding algorithm is performed. A DEM interpolation error model solves the second one. For InSAR data processing, the SRTM DEM is not only usable for modeling systematic phase errors but also for filtering gross height errors. The experiments in Zhangbei and the Three Gorges areas in China show that our approach has improved the accuracy of the resulting DEMs significantly without any ground control points. [ABSTRACT FROM AUTHOR]

Range and sill are two important parameters of a variogram. Their extraction usually Involves experimental fitting of variograms using models specified by the analyst and requires much use of trial and error. The objective of this paper is to desâgn an algorithm for extracting the range and sill of a variogram automatically without fitting a model Combined with the semivariance at the lag of one pixel (γ1), the extracted range and sift were applied to the textural classification of a panchromatic IKONOS image over Xichang, Sichuan Province, China. Results show that any of these three parameters can lead to the increase of the classification accuracy. When all three parameters were used with the raw image data, the average kappa statistic for five window sizes increased from 0.24 to 0.76, indicating promise of the range and sill in texture classification. [ABSTRACT FROM AUTHOR]