Search

Wildfires are one of the most destructive disasters on the planet. They also significantly impact the land surface. Satellite data have been widely used to detect the outbreak and monitor the expansion of fire incidents for damage assessment and disaster management. Polar-orbiting satellite data have been used for several decades but data from geostationary satellites, which can provide observations with a high temporal resolution, have received much less attention. This paper utilizes data from FengYun-2G, a Chinese geostationary satellite, to detect wildfires in two selected research regions in January 2016. The detection algorithm systemizes image-based analysis to filter out obvious nonfire pixels and temporal analysis to confirm the true detections. Fire detection is based on comparisons between predicted and observed values. The results show that the proposed method has some advantages compared with the use of polar-orbiting satellite data, including early detection and continuous observation. The validation work is conducted based on the collection 6.1 Global Monthly Fire Location Product generated from fire detections by Moderate Resolution Imaging Spectroradiometer (MODIS) sensors. The average accuracy within the target time is 56%, while the omission error rate is over 78%. In detail, the algorithm has a lower omission error rate in Australia while it fails in detecting most of the fire pixels in India. The dominance of small fire incidents, as well as low spatial resolution greatly limit the detection ability. Many small fires were beyond the ability of Stretched Visible and Infrared Spin Scan Radiometer (S-VISSR) data when no significant fire characteristics could be captured. Future development of the algorithm will focus on improving the results by enhancing the adaption to different regions, as well as, including multisource data sets. [ABSTRACT FROM AUTHOR]

The Soil Moisture Active Passive (SMAP) mission currently provides three surface soil moisture products based solely on instrument measurements. The three soil moisture products are: 1) the radiometer-only 36 km gridded; 2) a radiometer-only enhanced product gridded at 9 km; and 3) a high-resolution (3 km) SMAP-Sentinel active–passive product. It is important to validate these released SMAP soil moisture products over various land covers and hydroclimatic domains before they are routinely used in scientific research and applications. This paper evaluates SMAP-based soil moisture products for typical Indian conditions of extreme seasonal variability that leads to changes from very wet to dry soil, especially for the paddy dominated region. The assessment metrics indicate that the enhanced passive-only soil moisture product meets the SMAP accuracy requirement of 0.04 m3/m3 during the nongrowing season (NGS) with unbiased root-mean-square error (ubRMSE) values ranging between 0.025 and 0.036 m3/m3. However, this product underperformed during the paddy growing season (GS) with ubRMSE values ranging between 0.063 and 0.097 m3/m3. In addition, the SMAP-Sentinel active–passive soil moisture product shows satisfactory performance during the NGS (ubRMSE, 0.017–0.051 m3/m3), but during the GS, ubRMSE ranged between 0.089 and 0.104 m3/m3. Use of the vegetation water content climatology and low clay fraction in SMAP baseline algorithm (auxiliary database) that mismatched with the actual values may be the possible source of errors and biases in the SMAP soil moisture products. The reported study provides guidelines for the application of enhanced SMAP soil moisture products in India, especially for the tropical region, and provides information that can be used to improve the retrieval algorithm. [ABSTRACT FROM AUTHOR]

To detect landslides by object-based image analysis using criteria based on shape, color, texture, and, in particular, contextual information and process knowledge, candidate segments must be delineated properly. This has proved challenging in the past, since segments are mainly created using spectral and size criteria that are not consistent for landslides. This paper presents an approach to select objectively parameters for a region growing segmentation technique to outline landslides as individual segments and also addresses the scale dependence of landslides and false positives occurring in a natural landscape. Multiple scale parameters were determined using a plateau objective function derived from the spatial autocorrelation and intrasegment variance analysis, allowing for differently sized features to be identified. While a high-resolution Resourcesat-1 Linear Imaging and Self Scanning Sensor IV (5.8 m) multispectral image was used to create segments for landslide recognition, terrain curvature derived from a digital terrain model based on Cartosat-1 (2.5 m) data was used to create segments for subsequent landslide classification. Here, optimal segments were used in a knowledge-based classification approach with the thresholds of diagnostic parameters derived from If-means cluster analysis, to detect landslides of five different types, with an overall recognition accuracy of 76.9%. The approach, when tested in a geomorphologically dissimilar area, recognized landslides with an overall accuracy of 77.7%, without modification to the methodology. The multiscale classification-based segment optimization procedure was also able to reduce the error of commission significantly in comparison to a single-optimal-scale approach. [ABSTRACT FROM AUTHOR]

In the U.S. Wide Area Augmentation System, European Geostationary Navigation Overlay Service, and Indian Global Positioning System Aided Geo Augmented Navigation, a near real-time grid-based single-shell model is proposed to correct the ionospheric delay at the user aircrafts. The single-shell model is based on the assumption that the whole ionosphere is compressed at a fixed altitude at 350 km. This assumption may not be appropriate for the Indian region, which falls in the Equatorial Ionospheric Anomaly belt. In this paper, a two-shell model which incorporates two different shells, at 300- and 500-km altitudes, having different weights at different time domains has been implemented. A statistical comparison between single- and two-shell models has been done for all quiet days of year 2005. Based on the results, it is observed that there is at least 60% improvement in the performance of the two-shell model in comparison to the single-shell model for the Indian region. [ABSTRACT FROM AUTHOR]

The sensitivity of synthetic aperture radar (SAR) backscatter to soil moisture has been adequately established. However, monitoring of soil moisture over large agricultural areas is still difficult because SAR backseatter is also sensitive to other target properties like surface roughness, crop cover, and soil texture (soil type), along with its strong sensitivity to soil moisture. Hence, to develop a methodology for large-area soil moisture estimation using SAR, it is necessary to incorporate the effects of surface roughness, crop cover, and soil texture in the soil moisture retrieval model. In this paper, a methodology for soil moisture estimation over a large area is developed using a pair of low- and high-incidence-angle RADARSAT-1 SAR data over parts of Agra, Mathura, and Bharatpur districts, India, during March 1999. The methodology requires acquisition of synthetic aperture radar data at low and high incidence angles, such that the soil moisture changes are negligible between the two acquisitions. In order to demonstrate the applicability of the developed methodology, the same was validated over a different area (parts of Saharanpur and Haridwar district.s, India) during March 2005. Both test sites provided the variety of agricultural heterogeneity required for development and validation of the methodology for large-area soil moisture estimation. The proposed methodology offers an approach to incorporate the effects of surface roughness, crop cover, and soil texture in the soil moisture retrieval model from the space platform, without making any assumptions on the distributions of these parameters or without knowing the actual values of these parameters on ground. [ABSTRACT FROM AUTHOR]

This paper reports results on the LAI Retrieval and Validation Experiment (LRVE) that was conducted for two agricultural areas in Central India during the winter season of 2001–2002. The study aimed at relating field measurements of leaf area index (LAI) to spaceborne Indian Remote Sensing Satellite (IRS) Linear Imaging Self Scanning Sensor-III (LISS-III) data, preparation of site-level LAI maps, and validation of Moderate Resolution Imaging Spectroradiometer (MODIS) 1-km LAI global fields. Measurements of field-level LAI, aerosol optical thickness and water vapor were carried out on the day of LISS-III overpasses. Empirical models based on the site-specific LAI-vegetation index relation were developed and used to generate 23-m resolution LAI maps for two sites (Indore and Bhopal) covering 30 km × 30 km. These LAI images were degraded to 1-km spatial resolution and used for validation of the version 3 and 4 MODIS LAI products (MOD15A2). The results indicate a positive correlation (r = 0.78) between LAI derived from LISS-III data and MODIS data. However an overestimate by a factor of 1.6 to 2.5 in the version 3 MODIS product is observed with root mean square error (RMSE) ranging from 0.20 to 1.26. The factor of overestimation reduces significantly by 50% and RMSE by 40% when version 4 MODIS LAI was analyzed. The improvement in accuracy was observed to be associated with the change in algorithm path adopted for retrieving version 3 and 4 MODIS LAI. Analysis of the MODIS land cover product that is an input in the MODIS LAI retrieval algorithm indicated errors in assigning land cover classes for the study sites, which could be one of the sources of error in MODIS LAI product. [ABSTRACT FROM AUTHOR]