Search

For the recently developed quasi-reversible BCH codes with long lengths and high error-correcting capability, this paper is aimed at proposing a new and faster decoding procedure. It consists of four steps: 1) compute the consecutive syndromes; 2) calculate the syndrome functions by the forward and backward recursions; 3) solve a linear subsystem together with one matrix multiplication in order to find an error-locator polynomial; 4) determine the errors from the obtained polynomial by using the root-finding algorithm. This procedure, especially in Steps 2 and 3, differs greatly from the conventional procedures, which determine an error-locator polynomial directly from solving a linear system with the aid of the consecutive syndromes. The key idea behind this decoding technique is that the computational complexity of such a small subsystem instead of an originally large linear system can be significantly reduced, although there are additional forward and backward syndrome calculations with low complexity increasing. Finally, the illustrative examples and numerical simulations can be helpful to demonstrate the accuracy and efficacy of the presented decoding technique at different error-correcting capabilities. [ABSTRACT FROM AUTHOR]

Interleaved Reed–Solomon codes admit efficient decoding algorithms which correct burst errors far beyond half the minimum distance in the random errors regime, e.g., by computing a common solution to the Key Equation for each Reed–Solomon code, as described by Schmidt et al. If this decoder does not succeed, it may either fail to return a codeword or miscorrect to an incorrect codeword, and good upper bounds on the fraction of error matrices for which these events occur are known. The decoding algorithm immediately applies to interleaved alternant codes as well, i.e., the subfield subcodes of interleaved Reed–Solomon codes, but the fraction of decodable error matrices differs, since the error is now restricted to a subfield. In this paper, we present new general lower and upper bounds on the fraction of error matrices decodable by Schmidt et al.’s decoding algorithm, thereby making it the only decoding algorithm for interleaved alternant codes for which such bounds are known. [ABSTRACT FROM AUTHOR]

BCH codes are an important class of cyclic codes which have applications in satellite communications, DVDs, disk drives, and two-dimensional bar codes. Although BCH codes have been widely studied, their parameters are known for only a few special classes. Recently, Ding et al. made some new progress in BCH codes. However, we still have very limited knowledge on the dimension of BCH codes, not to mention the weight distribution of BCH codes. In this paper, we generalize the results on BCH codes from several previous papers. 1) The dimension of narrow-sense BCH codes of length $((q^{m}-1)/{\lambda })$ with designed distance $2\leq \delta \leq (({q^{\lceil (m+1)/2 \rceil }-1})/(\lambda)+1)$ is settled, where $\lambda $ is any factor of $(q-1)$. 2) The weight distributions of two classes of narrow-sense BCH codes of length $(({q^{m}-1})/2)$ with designed distance $\delta =(({(q-1)q^{m-1}-q^{\lfloor (m-1)/2\rfloor }-1})/2)$ and $\delta =(({(q-1)q^{m-1}-q^{\lfloor (m+1)/2\rfloor }-1})/2)$ are determined. 3) The weight distribution of a class of BCH codes of length $((q^{m}-1)/({q-1}))$ is determined. In particular, a subclass of this class of BCH codes is optimal with respect to the Griesmer bound. Some optimal linear codes obtained from this class of BCH codes are characterized. [ABSTRACT FROM AUTHOR]

Tietäväinen’s upper and lower bounds assert that for block-length- $n$ linear codes with dual distance $d$ , the covering radius $R$ is at most $({n}/{2})-(({1}/{2})-o(1))\sqrt {dn}$ and typically at least $({n}/{2})-\Theta (({dn\log {({n}/{d})}})^{1/2})$. The gap between those bounds on $R -({n}/{2})$ is a $\Theta (({\log {({n}/{d})}})^{1/2})$ factor related to the gap between the worst covering radius given $d$ and the sphere-covering bound. Our focus in this paper is on the case when $d = o(n)$ , i.e., when the code size is subexponential and the gap is $w(1)$. We show that up to a constant, the gap can be eliminated by relaxing the covering requirement to allow for missing $o(1)$ fraction of points. Namely, if the dual distance $d = o(n)$ , then for sufficiently large $d$ , almost all points can be covered with radius $R\leq ({n}/{2})-\Theta (({dn\log {({n}/{d})}})^{1/2})$. Compared with random linear codes, our bound on $R-({n}/{2})$ is asymptotically tight up to a factor less than 3. We give applications to dual-BCH codes. The proof builds on the author’s previous work on the weight distribution of cosets of linear codes, which we simplify in this paper and extend from codes to probability distributions on $\{0,1\}^{n}$ , thus enabling the extension of the earlier result to $(d-1)$ -wise independent distributions. [ABSTRACT FROM AUTHOR]

Cyclic codes are widely employed in communication systems, storage devices, and consumer electronics, as they have efficient encoding and decoding algorithms. BCH codes, as a special subclass of cyclic codes, are in most cases among the best cyclic codes. A subclass of good BCH codes are the narrow-sense BCH codes over \mathrm GF(q) with length n=(q^m-1)/(q-1) . Little is known about this class of BCH codes when $q>2$ . The objective of this paper is to study some of the codes within this class. In particular, the dimension, the minimum distance, and the weight distribution of some ternary BCH codes with length n=(3^{m}-1)/2 are determined in this paper. A class of ternary BCH codes meeting the Griesmer bound is identified. An application of some of the BCH codes in secret sharing is also investigated. [ABSTRACT FROM PUBLISHER]

In addition to their applications in data storage, communications systems, and consumer electronics, linear complementary dual (LCD) codes—a class of linear codes—have been employed in cryptography recently. LCD cyclic codes were referred to as reversible cyclic codes in the literature. The objective of this paper is to construct several families of reversible cyclic codes over finite fields and analyze their parameters. The LCD cyclic codes presented in this paper have very good parameters in general, and contain many optimal codes. A well rounded treatment of reversible cyclic codes is also given in this paper. [ABSTRACT FROM PUBLISHER]

BCH codes are an interesting type of cyclic codes and have wide applications in communication and storage systems. Generally, it is very hard to determine the minimum distances of BCH codes. In this paper, we determine the weight distributions of two classes of primitive BCH codes $\mathcal C_{(q, m, \delta _{2})}$ and $\mathcal C_{(q, m, \delta _{3})}$ and their extended codes, which solve two problems proposed by Ding et al. It is shown that the extended codes $\overline {\mathcal C}_{(q, m, \delta _{2})}$ have four nonzero weights. We also employ the Hartmann-Tzeng bound to present the minimum distance of the dual code $\mathcal C_{(q, m, \delta _{2})}^\perp $ for $q \ge 5$. Inspired by the idea, we then determine the dimensions of a class of cyclic codes and give lower bounds on their minimum distances, which is greatly improved comparing with the BCH bound. Some optimal codes are obtained. [ABSTRACT FROM AUTHOR]

Because of their efficient encoding and decoding algorithms, cyclic codes—an interesting class of linear codes—are widely used in communication systems, storage devices, and consumer electronics. BCH codes form a special class of cyclic codes, and are usually among the best cyclic codes. A subclass of good BCH codes is the narrow-sense primitive BCH codes. However, the dimension and minimum distance of these codes are not known in general. The main objective of this paper is to study the dimension and minimum distances of a subclass of the narrow-sense primitive BCH codes with design distance \delta =(q-\ell 0)q^{m-\ell 1-1}-1 for certain pairs (\ell 0, \ell 1) , where 0 \leq \ell 0 \leq q-2 and 0 \leq \ell 1 \leq m-1 . The parameters of other related classes of BCH codes are also investigated, and some open problems are proposed in this paper. [ABSTRACT FROM PUBLISHER]

Historically, LCD cyclic codes were referred to as reversible cyclic codes, which had applications in data storage. Due to a newly discovered application in cryptography, there has been renewed interest in LCD codes. In this paper, we explore two special families of LCD cyclic codes, which are both BCH codes. The dimensions and the minimum distances of these LCD BCH codes are investigated. [ABSTRACT FROM AUTHOR]

The Rosenbloom–Tsfasman metric has attracted the attention of many researchers as a generalization of the Hamming metric that is relevant to practical problems. Codes for this metric were considered. In particular, Reed–Solomon codes were generalized to be compatible with this metric. In this paper, a generalization of BCH codes for the Rosenbloom–Tsfasman metric is proposed. This generalization is based on considering BCH codes as subfield subcodes of Reed–Solomon codes. By characterizing these subfield subcodes, an explicit construction of BCH codes for the Rosenbloom–Tsfasman metric is provided. Two important properties of Reed–Solomon codes and BCH codes for the Rosenbloom–Tsfasman metric are studied and compared with those for the Hamming metric. These properties are cyclic structure and duality. The approach is based on Galois-Fourier transforms associated with Hasse derivatives. [ABSTRACT FROM PUBLISHER]

This paper is devoted to studying two main problems: 1) computing the apparent distance of an Abelian code and 2) giving a notion of Bose, Ray-Chaudhuri, Hocquenghem (BCH) multivariate code. To do this, we first strengthen the notion of an apparent distance by introducing the notion of a strong apparent distance; then, we present an algorithm to compute the strong apparent distance of an Abelian code, based on some manipulations of hypermatrices associated with its generating idempotent. Our method uses less computations than those given by Camion and Sabin; furthermore, in the bivariate case, the order of computation complexity is reduced from exponential to linear. Then, we use our techniques to develop a notion of a BCH code in the multivariate case, and we extend most of the classical results on cyclic BCH codes. Finally, we apply our method to the design of Abelian codes with maximum dimension with respect to a fixed apparent distance and a fixed length. [ABSTRACT FROM AUTHOR]

Cyclic codes are an interesting class of linear codes due to their efficient encoding and decoding algorithms. Bose-Ray-Chaudhuri-Hocquenghem (BCH) codes form a subclass of cyclic codes and are very important in both theory and practice as they have good error-correcting capability and are widely used in communication systems, storage devices, and consumer electronics. However, the dimension and minimum distance of BCH codes are not known in general. The objective of this paper is to determine the Bose and minimum distances of a class of narrow-sense primitive BCH codes. [ABSTRACT FROM AUTHOR]