Search

Utility engineers, professionals from regulatory agencies, manufacturers and researchers have discussed if high-frequency distortions produced by rooftop photovoltaic generators are a general power quality concern for distribution systems. In this context, this paper presents the results of an extensive research to investigate the emission and propagation characteristics of such high-frequency distortions. Analytical and theoretical analyses, computer simulations, laboratory experiments and field measurements revealed that high-frequency distortions emitted by rooftop photovoltaic inverters are produced with a voltage source characteristic. As a result, the equivalent grid impedance limits and attenuates significantly the high-frequency distortions injection and propagation into the distribution systems. Moreover, the front-end, low-pass filters found in many home appliances also contribute with such attenuation by sinking part of the high-frequency distortions. In summary, the results indicate that these distortions are unlikely to become a generalized power quality concern, so that the front-end filters commonly available for such devices, when properly designed, are enough to deal with this issue. [ABSTRACT FROM AUTHOR]

This paper deals with the estimation of parameters of a Thevenin equivalent in an AC grid. We consider the practically relevant case of measurements coming from a grid-connected inverter. Our focus is on non-intrusive measurements, as we postulate and later experimentally observe transients that occur in normal operation as the primary source of information. We notice that even during quiet, after work hours there are typically enough variations in the grid to enable successful convergence of our procedure. For completeness, we also consider the artificial case of no external variations and show that injection of very small current perturbations suffices for convergence. Our procedure is based on real-time monitoring of the estimated determinant of the regression matrix. Regression matrix properties are also used to evaluate the integrity of the estimates and to initiate a brief sequence of perturbation in rare cases of the exceptionally restful grid. The estimation algorithm is simple enough to be implementable on standard industrial controllers, yet robust and reliable in terms of speed of convergence. [ABSTRACT FROM AUTHOR]

In high power applications, 3-phase ac/dc Voltage Source Converters (VSCs) are paralleled to increase the overall aggregated converter power rating, effective switching frequency and control bandwidth. For this, interleaved Pulse Width Modulation (PWM) and current limiting paralleling inductors are required. Interphase Transformers (ITRs) are often used for the converter paralleling because they provide large magnetizing inductances for the currents flowing between the converters while introducing negligible leakage inductances for the currents flowing from the converters to the ac grid. This large asymmetry in the inductance values makes it difficult to independently control active power flows in the individual converters. Thus, if the converters dc buses are not mutually interconnected, instabilities in active control of balance of converter dc bus voltages can occur in certain operational conditions. This paper presents a theoretical analysis of the active power flows produced by the currents flowing among the converters and explains origins of potential instability in the active control of balance of dc bus voltages in multi-converter systems with floating dc buses, paralleled using the ITRs. [ABSTRACT FROM AUTHOR]