Search

The dual-active bridge (DAB) topology is commonly preferred in bidirectional applications due to several attractive features, including auto-adjust of power flow, galvanic insulation, wide voltage gain, and zero voltage switching (ZVS) capability over some power ranges. However, the efficiency of the converter drops at light loads because the ZVS range is directly dependent on the circulating current. Assuming that the processed power is variable, the DAB converter's design must find a compromise between extending ZVS ranges and reducing the reactive power processing to ensure higher efficiency. Aiming this compromise, many papers propose hybrid approaches in which the modulation strategy is selected according to the processed power. However, this is not a simple solution because it demands multivariable control and offline optimizations. This paper proposes a modulation strategy to ensure ZVS and reduce the circulating current for the DAB converters. While the usual phase-shift modulation provides ZVS operation in a range of 40% to 100% of rated power, the proposed asymmetrical pulse-width modulation can obtain ZVS operation in a range of 2% to 100% of rated power. Experimental results demonstrated that the proposed strategy improves the converter efficiency for all power ranges, especially at light loads. [ABSTRACT FROM AUTHOR]

In recent years, very high frequency (VHF) converter has attracted much attention. However, with rich parasitic parameters and complex resonance links, there are some great difficulties to the modeling of such systems. Taking the on-off controlled VHF resonant boost converter as an example, this paper presents an accurate modeling and analysis method that considers multiple parasitic parameters. First, the closed-loop VHF converter system is divided into a main network and a parasitic oscillation network. Then, based on the operation analysis, an equivalent circuit model characterized by a time-varying input voltage source and two variable duty-cycle controlled switches is proposed. It worth noting that both the time-varying input and the controlled switches take into account the influences of the parameters. Furthermore, the periodic approximate analytical solution of the output voltage in the on stage is obtained by using the equivalent small parameter method to the proposed circuit model. And then combining the solution of the parasitic oscillation network and on-off state switching conditions, the steady-state waveform of output voltage can be obtained quickly. Finally, a prototype with operating frequency of 21.44 MHz is built to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

In many papers, random modulation of power electronic converters is described as an electromagnetic interference (EMI) mitigation technique, which contributes to the assurance of electromagnetic compatibility (EMC) of systems consisting of power electronic converters and serial transmission-based control and measuring devices. However, experimental results as well as theoretical analyses of physical phenomenon suggest that the EMI reduction is ostensible and results from the measuring procedure adopted in standards. This article presents the first known approach to compare the influence of deterministic and random modulation of transmission errors rate in serial communication systems. The comparison is based on the especially developed mathematical models, which are validated experimentally, using a simple setup with a dc/dc converter injecting a noise into the USB/RS232 converter representing a serial transmission scheme. The comparison reveals that for the studied switching frequency range from 10 kHz to 1 MHz, on average, there is no significant difference between random and deterministic modulations with respect to the probability of error rate in serial communication systems. Thus, in such systems, random modulation should not be considered as a valid EMC-assuring technique. [ABSTRACT FROM AUTHOR]

The bidirectional CLLC resonant converter has distinguished potential in battery chargers and energy storage systems for its advantages in soft switching and bidirectional power flow capability. However, traditional CLLC converters generally adopt symmetrical design to maintain bidirectional symmetrical characteristics, which means the secondary LC network is designed to be equal to the primary LC network after reflection. The symmetrical design is only suitable for voltage grade matching scenarios where a wide voltage range is not required, such as CLLC-type dc transformers. Whereas in the field of bidirectional chargers, due to the wide voltage range of battery, there are significant differences in the characteristics required between charging and discharging mode, which makes symmetrical design no longer applicable. To cope with this issue, this paper proposes a novel design methodology of CLLC based on parameter equivalent and time domain model. With the parameter equivalent principle, the CLLC resonant tank with arbitrary parameters is investigated to satisfy the requirements of wide voltage range for bidirectional charger application. Compared with the symmetrical design, the proposed method can meet the requirements of bidirectional gain within preset frequency range and guarantee the achievement of zero-voltage switching under required load conditions with the minimum reactive power. In addition, the area product capacity of the magnetic part of the CLLC resonant tank is minimized based on the parameter equivalent principle. Finally, experiments have been performed on a 1 kW prototype to confirm the validity and feasibility of the proposed design methodology. [ABSTRACT FROM AUTHOR]

As a flexible and reliable way for distributed energy consumption and integration, the converters-dominated microgrid has attracted more and more attention recently. Owing to the low inertia and high nonlinearity of power converters, the islanded microgrid under large-signal disturbances is easily suffer to transient stability problems. To support the stable operation of microgrid, grid-forming converters are extensively investigated and applied. In this paper, an improved equal area criterion (IEAC) is proposed for the transient stability analysis of a simple microgrid equipped with both grid-following and grid-forming converters. Firstly, a simplified second-order model of the microgrid is established, which contains a nonlinear damping term relying on the power angle. Then, the limitation of conventional equal area criterion (EAC) for transient stability analysis is revealed, which completely ignores the unfavorable influence of negative damping and may lead to erroneous judgement. To fill this gap, an improved equal area criterion is proposed to derive the transient stability conditions for islanded microgrid, which could improve the estimation accuracy of stability boundaries. Moreover, impacts of system parameters and controller parameters on transient stability are studied, which provides useful guidelines for the parameter optimization of grid-forming and grid-following converters. Eventually, simulation and hardware-in-loop experiments are conducted to verify the effectiveness and superiority of the proposed method. [ABSTRACT FROM AUTHOR]

This article develops a series of improved Z-source dc–dc converters to realize additional voltage pumping and high power density through two propositions. Proposition 1 develops two improved positive- and negative-connected Z-source dc–dc converters (IPZSC and INZSC), using the same number of components as in the existing voltage pumping Z-source converter. Based on Proposition 1, Proposition 2 proposes four novel embedded Z-source dc–dc converters (EZSCs) by placing the source in a specifically designed position, which realizes lower voltage stresses across capacitors. Various technical aspects of the proposed EZSCs, including operations, power losses, and small signal stability analyses are detailed in this paper. Besides, comparisons between the proposed series of improved Z-source dc–dc converters and other existing Z-source dc–dc converters are thoroughly made to demonstrate the better performance of the EZSCs. Finally, experiments are conducted to well validate the effectiveness and superiority of the proposed converter circuits. [ABSTRACT FROM AUTHOR]

This article proposes a novel bidirectional isolated dc–dc converter with high voltage gain and wide input voltage, which can be applied to bidirectional power conversion systems. The proposed topology is composed of a bidirectional buck-boost converter and a forward-flyback converter; it has the advantage of higher voltage gain and has continuous current characteristic of the low-side port in step-up and step-down mode. In addition, the proposed topology also has the function of leakage inductance energy recovery, which can improve the efficiency of the converter, reduce the voltage surges on switches, and have the characteristics of zero voltage switching on certain switches. Finally, this paper implements a 500-W bidirectional dc–dc converter to verify the feasibility of the proposed topology. The low-side voltage of the proposed topology is 24, 48, and 55 V; the maximum efficiency in step-up mode are 94.2%, 95.6% and 96.9%, and the maximum efficiency are 92.6%, 94.2% and 94.5% in the step-down mode, respectively. [ABSTRACT FROM AUTHOR]

Isolated, zero-voltage-switching dc–dc converter topologies represent attractive solutions in the continuous run toward higher switching frequencies, allowing more compact power supplies. Among them, the asymmetrical half-bridge flyback converter represents an interesting option, featuring simple duty-cycle control at constant switching frequency, as opposed to the popular LLC converter. The majority of papers dealing with this topology consider an approximated voltage gain similar to that of an isolated buck converter operating in continuous conduction mode, i.e., proportional to the duty cycle and, practically, load independent. On the contrary, the true voltage gain is nonmonotonic at high duty-cycle values. Anytime the converter is designed for a resonant operation, as is advisable to eliminate any reverse recovery problem of the rectifier diode, the voltage gain not only increases, but also becomes a function of the switching frequency. This article investigates the converter's voltage gain in detail, deriving a theoretical framework capable of capturing its real behavior and dependencies. The proposed analytical model has been verified through simulations as well as experimental measurements taken on a 160-W prototype working at 400 kHz. [ABSTRACT FROM AUTHOR]