Search

Pulsewidth-modulated (PWM) current-source converters (CSCs) have the features of simple configuration, reliable short-circuit protection, and sinusoidal ac output voltages. The conventional space-vector modulation (SVM) scheme usually generates high-magnitude low-order harmonics in CSCs with low switching frequency. In this article, two modified SVM schemes, namely MSVM1 and MSVM2, are proposed to improve the harmonic performance for PWM CSCs in the high-power applications with low switching frequencies. The MSVM1 scheme focuses on eliminating the average dwell-time error of current vectors within each sampling period, while the MSVM2 scheme is targeted to achieve the accurate dwell time of current vectors as that of the natural sampling-based SVM scheme. The theoretical analysis and the calculation equations of dwell time are derived for both MSVM1 and MSVM2. The experiments are given to verify the effectiveness of the two modified SVM schemes in improving the harmonic performance of high-power CSCs with low switching frequencies. [ABSTRACT FROM AUTHOR]

In this article, the control strategy is studied for the neutral-point-clamped three-level inverter-fed dual three-phase permanent-magnet synchronous motor (PMSM) drive with low switching frequencies. An interleaved finite-control-set model predictive control (MPC) scheme is proposed, where a two-layer MPC is designed to solve the multiobjective optimization problem. The two sets of windings in PMSM are sampled and controlled in an interleaved way so that the control delay and the prediction horizon of the drive system are reduced by half. Moreover, the proposed interleaved control scheme increases the equivalent sampling and control frequency from the perspective of the whole drive system, and thus provides better steady-state performance and dynamic performance. With the switching states of one inverter remaining unchanged, the cross traversal of vector candidate sets between two sets of windings is avoided, and the computational burden can be reduced effectively. Experimental results are given to verify the validity and effectiveness of the proposed interleaved control scheme. [ABSTRACT FROM AUTHOR]

The silicon carbide (SiC) devices have attracted more and more attention due to the capability of withstanding higher blocking voltage, higher switching frequency, and higher temperature. However, challenges for SiC devices applied in voltage-source-inverter fed motor drives such as electromagnetic interference (EMI) issues and limited over-current capability still limit the further application of SiC devices. In this article, a novel SiC devices based zero-voltage-switching (ZVS) current-source-inverter (CSI) is proposed for permanent-magnet synchronous motor (PMSM) drive. The key is to propose an auxiliary resonant circuit, which achieves ZVS conditions for all switches in power circuits and reduces the dv/dt of high speed SiC devices. The resonant capacitor in the auxiliary circuit can clamp overvoltage caused by possible open-circuit faults. To further reduce the EMI, the random switching frequency pulsewidth modulation is designed for the proposed CSI motor drive. The system configuration, working principle, circuit design, and control schemes are described in detail. Both simulations and experiments are presented to verify the effectiveness of the proposed ZVS-CSI fed PMSM drive system. [ABSTRACT FROM AUTHOR]

In this paper, three control schemes with variable switching frequencies are proposed and analyzed for the paralleled voltage source inverters (VSIs) fed permanent magnet synchronous motor (PMSM) drive. The proposed schemes could be applied in the low-speed operation region of high-power drive system, where the frequency modulation index is high. First, the field-oriented control (FOC) with phase-shifted chaotic space vector modulation (SVM) under synchronous frame and the FOC with phase-shifted chaotic sinusoidal pulse width modulation under stationary frame is proposed for the paralleled VSIs fed PMSM drive. The proposed phase-shifted chaotic PWM schemes not only eliminate specific switching harmonics completely but also suppress all remaining switching harmonic peaks in the spectrum. The avoidance of inherent circulating current is also considered in designing these two schemes. Second, the direct torque control (DTC) for the paralleled VSIs fed PMSM drive is proposed with circulating current suppression. Besides inheriting the advantages of DTC, the output currents of paralleled VSIs are kept balanced. The working principles of these three methods are presented in detail. Experimental results on a laboratory prototype are given to verify the validity of the three proposed control schemes for the paralleled VSIs fed PMSM with variable switching frequencies. [ABSTRACT FROM PUBLISHER]

In this paper, a hybrid pulsewidth modulation (PWM) scheme is proposed to suppress the LC resonance for the high-power current-source inverter (CSI) fed drives with low switching frequency. In CSI drive systems, the selective harmonic elimination (SHE) is selected due to the better performance of harmonics, but the LC resonance cannot be effectively damped due to the lack of control flexibility of SHE. In this paper, SHE is only used for the steady-state operation. The modulation scheme is then switched to space vector modulation with dynamic capacitor voltage control when the transient event occurs. The smoothed transitions between different modulation schemes are proposed. The proposed hybrid method effectively solves the resonant issues in CSI drives, while maintaining the power quality. Both simulation and experiments verify the performance of the proposed hybrid PWM scheme. [ABSTRACT FROM AUTHOR]