Search

The silicon carbide (SiC) devices have attracted more and more attention due to the capability of withstanding higher blocking voltage, higher switching frequency, and higher temperature. However, challenges for SiC devices applied in voltage-source-inverter fed motor drives such as electromagnetic interference (EMI) issues and limited over-current capability still limit the further application of SiC devices. In this article, a novel SiC devices based zero-voltage-switching (ZVS) current-source-inverter (CSI) is proposed for permanent-magnet synchronous motor (PMSM) drive. The key is to propose an auxiliary resonant circuit, which achieves ZVS conditions for all switches in power circuits and reduces the dv/dt of high speed SiC devices. The resonant capacitor in the auxiliary circuit can clamp overvoltage caused by possible open-circuit faults. To further reduce the EMI, the random switching frequency pulsewidth modulation is designed for the proposed CSI motor drive. The system configuration, working principle, circuit design, and control schemes are described in detail. Both simulations and experiments are presented to verify the effectiveness of the proposed ZVS-CSI fed PMSM drive system. [ABSTRACT FROM AUTHOR]

In this paper, a hybrid pulsewidth modulation (PWM) scheme is proposed to suppress the LC resonance for the high-power current-source inverter (CSI) fed drives with low switching frequency. In CSI drive systems, the selective harmonic elimination (SHE) is selected due to the better performance of harmonics, but the LC resonance cannot be effectively damped due to the lack of control flexibility of SHE. In this paper, SHE is only used for the steady-state operation. The modulation scheme is then switched to space vector modulation with dynamic capacitor voltage control when the transient event occurs. The smoothed transitions between different modulation schemes are proposed. The proposed hybrid method effectively solves the resonant issues in CSI drives, while maintaining the power quality. Both simulation and experiments verify the performance of the proposed hybrid PWM scheme. [ABSTRACT FROM AUTHOR]

The modular multilevel converter (MMC) is an attractive option for high-voltage and high-power applications. Fault localization is one of the most important challenges for the MMC consisting of a large number of power electronic switches. Existing literature has not provided a complete fault localization strategy for the MMC under submodule (SM) lower switch open-circuit fault, which only considers the MMC in inverter mode and neglects the MMC in rectifier mode. This article proposes a fault localization strategy for the MMC under SM lower switch open-circuit fault, which is suitable for the MMC not only in inverter mode but also in rectifier mode. This article analyzes the MMC fault characteristics under SM lower switch open-circuit fault, which considers the MMC in inverter and rectifier mode, respectively. Based on two modes’ common fault characteristic that the capacitor is charged all the time during the period when the arm current is positive, the faulty SM can be effectively located by the proposed fault localization strategy. The proposed strategy is not only implemented in simulation with professional tool PSCAD/EMTDC but also verified with a downscale MMC prototype in the laboratory. The results confirm the effectiveness of the proposed strategy. [ABSTRACT FROM AUTHOR]