Search

A feedback linearization based direct torque control (FL-DTC) scheme is designed for interior permanent magnet synchronous motors drives. Several main aspects related to FL are studied thoroughly. A proper choice of two new state variables (the torque and the squared amplitude of stator flux) yields the exact input–output linearization decoupling of the closed-loop system. The FL-DTC frame is obtained after finding a feasible diffeomorphism. For the partially linearized subsystem, i.e., the independent torque and flux loops, two FL-DTC-based controller design solutions are provided. The control problem of internal dynamics is converted to an absolute tracking problem of an equivalent Lur'e system. [ABSTRACT FROM AUTHOR]

This paper studies and proposes the vector space decomposition-based direct torque control (DTC) scheme for the T-type neutral-point-clamping (T-NPC) three-level inverters-fed double-stator-winding permanent magnet synchronous machine (PMSM) drive, which provides an effective solution for high-power high-reliability applications. The key is to propose a simple but effective space vector modulation (SVM) for DTC of T-NPC double-stator-winding drives-based two-step voltage vector synthesis, in such a way that good dynamic response and harmonic performance are obtained. The closed-loop controllers on harmonic subspace are incorporated to suppress the possible harmonics induced from back electromotive force and unbalanced parameters in phase windings of electrical machine. Furthermore, a hybrid current control is proposed for fault-tolerant operation of the T-NPC double-stator-winding PMSM drives under one-phase open-circuit conditions. In the hybrid current controller, the healthy winding still uses the SVM-DTC control while the faulty winding uses the closed-loop current controller to track the optimized current references. Both simulation and experimental results are presented to verify the performance of the proposed switching strategies and control schemes. [ABSTRACT FROM AUTHOR]

In this paper, three control schemes with variable switching frequencies are proposed and analyzed for the paralleled voltage source inverters (VSIs) fed permanent magnet synchronous motor (PMSM) drive. The proposed schemes could be applied in the low-speed operation region of high-power drive system, where the frequency modulation index is high. First, the field-oriented control (FOC) with phase-shifted chaotic space vector modulation (SVM) under synchronous frame and the FOC with phase-shifted chaotic sinusoidal pulse width modulation under stationary frame is proposed for the paralleled VSIs fed PMSM drive. The proposed phase-shifted chaotic PWM schemes not only eliminate specific switching harmonics completely but also suppress all remaining switching harmonic peaks in the spectrum. The avoidance of inherent circulating current is also considered in designing these two schemes. Second, the direct torque control (DTC) for the paralleled VSIs fed PMSM drive is proposed with circulating current suppression. Besides inheriting the advantages of DTC, the output currents of paralleled VSIs are kept balanced. The working principles of these three methods are presented in detail. Experimental results on a laboratory prototype are given to verify the validity of the three proposed control schemes for the paralleled VSIs fed PMSM with variable switching frequencies. [ABSTRACT FROM PUBLISHER]

In this article, a dual-vector located model predictive control (DL-MPC) method based on a single dc-link current sensor is proposed for the permanent-magnet linear motor drive system. In DL-MPC, the phase currents are reconstructed by sampled dc-link current and selected active voltage vector (VV). Meanwhile, the sunk number of phase current is defined to evaluate the accuracy of current reconstruction. The first-optimal and second-optimal VVs are determined by dual-vector location. The second-optimal VV is selected for the voltage source inverter when the sunk number exceeds the threshold. Compared with traditional MPC schemes, DL-MPC has smaller current tracking error and better dynamic performance. Meanwhile, DL-MPC has more accurate current reconstruction and lower computation burden than that of the traditional MPC. The effectiveness of DL-MPC is verified by both theoretical analysis and experimental results. [ABSTRACT FROM AUTHOR]

This letter proposes a fast current control scheme for ac drives by minimizing the latency from current sampling to the updation of a pulsewidth-modulation (PWM) command. By reconstructing the architecture of a linear controller, the minimal necessary steps to obtain the output voltage are deduced as the primary calculation, and the other computation work of the current loop is done in the postcalculation after updating the PWM command. With the proposed method, the computational delay is reduced with negligible loss in the available modulation index, and a higher stability margin or system bandwidth is realized. Also, the developed controller structure exhibits inherited antiwindup characteristics. The technique has been validated by experimental investigations on a permanent magnet synchronous motor. [ABSTRACT FROM AUTHOR]