Search

This paper describes the circuit of a capacitor charger for a solid-state Marx modulator. A high-efficiency LCC resonant inverter is proposed for the simultaneous charging of many capacitors in parallel using a multistage transformer and rectifier. Using a high-voltage insulation cable, the charging loop, which represents the primary winding of transformer, is implemented to transfer the power from the resonant inverter to each stage. In addition to the simultaneous charging of separate capacitors, the advantages of the proposed circuit and structure include compact design and reliable insulation performance against high-voltage pulses. Based on the relevant approximation, the simplified analysis of an LCC resonant converter with a trapezoidal shape of resonant current is provided and a 50-kW high-voltage capacitor charger is designed for a 40-kV solid-state Marx modulator. The power stage, which consists of a transformer with four voltage-doubled rectifiers, is designed, and six power stages are configured for generating a pulse output of 40 kV. The detailed implementation of the multistage transformer and rectifier is presented in accordance with the design requirements of a high voltage modulator. Finally, the developed charger achieves 96% of the maximum efficiency and 0.96 of the maximum power factor. The experimental results verify that the proposed circuit and structure can be effectively used for a solid-state Marx modulator. [ABSTRACT FROM PUBLISHER]

This article describes the compact solid-state Marx modulator (SSMM) with a fast rising time and a short pulsewidth based on the modular structure. By stacking of the TO-263-7 packaged silicon carbide mosfets having high voltage and fast switching capabilities, the designed circuit consists of three components, including the Marx capacitor, an on switch for applying pulse to the load, and an off switch to pull down the pulse. The off switch connected in parallel with load is chosen as a mosfet instead of a diode that is used in the conventional Marx generator. Because the off switch provides a discharging path for the stored energy on the parasitic capacitance, it is highly related to the fast falling time. In order to provide complementary driving signal and power for on/off switches, the simple control algorithm with a minimum component count and a reliable drive circuit against the noise are proposed. In addition, the synchronization of all the gate signals and a compact configuration for minimizing the stray inductance are essential to shorten the rising, falling, and pulsewidth. Based on the proposed circuit, the following specifications of the developed SSMM are achieved: the output voltage of 10 kV, the pulsewidth of less than 50 ns, and the rising and falling times of less than 15 ns. [ABSTRACT FROM AUTHOR]