Search

This article presents a harmonic-domain single-input single-output (SISO) equivalent modeling technique for the impedance modeling and stability analysis of a single-phase grid-connected voltage-source converter (VSC). The basis is a conversion technique that transforms a harmonic transfer function (HTF)-based model into a SISO equivalent model while preserving all the information of frequency couplings. The proposed SISO modeling concept is useful for understanding the meaning and consequence of SISO impedance measurement of an interconnected system with frequency couplings, which further enables a simpler impedance measurement and impedance-based analysis. Applications of this method for the VSC model reduction and stability characteristic analyses are presented. From these results, useful conclusions regarding the accuracy of three types of reduced-order VSC impedance models and the stability effects of the VSC control with and without compensation for dc voltage variation are obtained. The presented examples of applications demonstrate how the proposed SISO modeling technique facilitates a simpler and efficient impedance-based analysis. Finally, experimental results verify the validity of the proposed VSC-SISO admittance and corresponding analyses. [ABSTRACT FROM AUTHOR]

Impedance modeling and stability analysis of a grid-voltage source converters (VSC) system under symmetric ac grids have been extensively discussed in the literature, where the dq domain impedances are usually adopted. As for asymmetric ac grids, impedance modeling is no longer straightforward in the dq domain due to the presence of negative sequence components, where the linearization will result in a linear-time-periodically-varying system, making the frequency-domain analysis intractable. One way to address this issue would be the harmonic-transfer-function (HTF) approach. Although this method is conceptually clear, its application to the stability analysis of an unbalanced grid-VSC system is still challenging and an effective model is missing here, therefore this paper aims to bridge this gap. First, the sequence impedances of an unbalanced grid-VSC system is modeled in the HTF framework. Then the HTFs are truncated into four-by-four matrices by exploiting the property of frequency couplings. Based on this, the equivalent source and load model for Nyquist-based analysis are established, and they are thoroughly verified by impedance measurements as well as the accuracy on stability analysis. Finally, several stability concerns of the unbalanced grid-VSC system, as well as the feasibility of symmetric models for asymmetric ac grid stability analysis are discussed and clarified. [ABSTRACT FROM AUTHOR]

The introduction of distributed generation (DG) into low voltage (LV) systems demands that the generation system remain grid connected during voltage sags to ensure the operational stability. The DG consisting of fixed speed squirrel cage induction generator (SCIG)-based wind turbines is unable to provide reactive power control and needs a dedicated compensating device. Under asymmetrical grid faults the negative sequence flux circulation in the airgap introduces the torque oscillations that lead to the reduction of lifetime of the generation system. This paper proposes the use of distributed constant power loads (CPLs) for asymmetrical fault ride through (FRT) instead of using a centralized STATCOM. It has also been observed that the compensation of negative sequence voltage improves the performance of SCIG by eliminating the torque ripples. The compensation of positive sequence voltage avoids a possible voltage collapse at the LV distribution level and improves the reliability and stability of the wind farm. Centralized compensation of the asymmetrical grid fault by a STATCOM is compared with the distributed compensation by CPLs. The results suggest that each individual CPL injects lower current for maximum FRT enhancement compared to a dedicated STATCOM. [ABSTRACT FROM AUTHOR]

The dual-active-bridge (DAB) is a typical topology of dc–dc converter for bus connection, voltage conversion, power transmission, and electrical isolation in dc power grids. The open-circuit switching fault (OCSF) may threaten the safe operation of DAB and should be eliminated in time. However, the researches on parasitic parameters mainly focus on traditional dc–dc converters, and there are still few discussions on parasitic parameters in the high-frequency dc–dc converter such as DAB. The power components are usually considered without parasitic parameters in OCSF analysis and tolerant control, leading to deviations in modality analysis and practical control for DAB. To solve this issue, the modality analysis considering parasitic parameters during OCSF in DAB is investigated, and the sneak circuits and electrical characteristics with parasitic parameters are discussed in this article. Besides, to realize fault tolerance for DAB during OCSF considering parasitic parameters, a new fault tolerance control strategy including modeling, topology transformation principle, and practical control architecture are also proposed. Compared with conventional fault tolerance strategy, the proposed strategy will be more efficient, rapid and feasible for DAB during OCSF process. The experimental results in DAB prototype verify correctness and effectiveness of analysis and proposed strategy. [ABSTRACT FROM AUTHOR]

This paper proposes a control method for limiting the torque of grid-connected cage induction machines during the recovery process after grid faults, by using a static synchronous compensator (STATCOM) connected at the machine terminals. When a STATCOM is used for transient stability improvement, common practice is to design the control system to keep reactive current at maximum level until the voltage has returned to its initial value. This will result in high torques during the recovery process after grid faults. The control method proposed in this paper is intended to limit such torque transients by temporarily defining a new voltage reference for the STATCOM control system. As torque is controlled through the voltage reference of the STATCOM, the method is labeled indirect torque control (ITC). The presented concept is a model-based approach derived from a quasi-static equivalent circuit of the induction machine, the STATCOM and a Thévenin representation of the power system. For illustration and verification, time-domain simulations of a wind power generation system with a STATCOM at the terminals of an induction generator, are provided. As the objective of limiting the torque of the induction machine is achieved, the derivation of the concept proves to be reasonable. The approach is presented in its most general form, oriented to torque limitation of induction machines both in generating and motoring mode, and is not restricted to the presented example. [ABSTRACT FROM AUTHOR]

This paper analyzes the extent to which the low voltage ride through (LVRT) capability of wind farms using squirrel cage generators can be enhanced by the use of a STATCOM, compared to the thyristor controlled static var compensator (SVC). The transient stability margin is proposed as the indicator of LVRT capability. A simplified analytical approach based on torque-slip characteristics is first proposed to quantify the effect of the STATCOM and the SVC on the transient stability margin. Results from experiments with a STATCOM and a 7.5 kW induction machine emulating a wind turbine are used to validate the suggested analytical approach. Further verifications based on detailed time-domain simulations are also provided. Calculations, simulations and measurements confirm how the increased STATCOM rating can provide an increased transient stability margin and thus enhanced LVRT capability. Compared to the SVC, the STATCOM gives a larger contribution to the transient margin as indicated by both calculations and simulations. The inaccuracies introduced by neglecting the flux transients in the suggested approach are discussed and found reasonable for an estimation method when considering the simplicity compared to detailed time-domain simulation studies. A method for estimating the required rating of different compensation devices to ensure stability after a fault is suggested based on the same approach. [ABSTRACT FROM AUTHOR]

Microgrids relying on cooperative control are supported by communications, which are highly vulnerable to cyberattacks. A significant amount of research is already carried out on the detection and mitigation of cyberattacks to secure the operation of dc microgrids. Although cyberattacks are fully capable of causing cascaded converter outages leading to full/partial system blackouts, disturbing the system stability can also be a viable target by the adversaries, which has been overlooked so far. Hence, this article focuses on addressing the instability caused by stealth cyberattacks, which can easily bypass the well-defined observability tests. In addition, this article also introduces a novel adaptive stabilization method to eliminate the unstable modes due to cyberattacks, which has been designed considering a previously defined cyberattack detection metric as an input. To investigate its feasibility, a detailed model of a stable dc microgrid is first developed. Then, considering stealth cyberattack as a nonlinear element, the describing function-based method is used to investigate system stability under attack conditions. Finally, theoretical analysis, simulation, and experimental results under various scenarios are presented to verify the effectiveness of the proposed stabilization scheme. [ABSTRACT FROM AUTHOR]

Input-series-output-parallel (ISOP) isolated bidirectional direct current (dc)/dc converter (IBdc) becomes a preferred scheme connecting high-voltage and low-voltage bus in dc distribution network. Input-voltage-sharing (IVS) among modules is essential to realize the stable operation of ISOP system. Nowadays, with large-scale access of distributed energy sources and loads in dc grids, the fluctuations in bus voltage and connected load become frequent and great, deteriorating the IVS performance and stable operation of ISOP structure IBdc. To solve this issue, a triple-close-loop IVS strategy is proposed in this article. Compared with the conventional IVS strategy with constant input impedance, the proposed IVS strategy reshapes input impedance to be a full-order model containing high-order components and sensitive to fluctuation of output voltage, and IVS control based on reshaped impedance improves dynamics feature, maintains ideal output power, and avoids false protection and potential instability for ISOP structure IBdc under frequent and large fluctuation. Experimental results verify the correctness and effectiveness of the analysis and proposed strategy, providing a feasible, efficient, and practical control scheme for ISOP system in dc distribution network. [ABSTRACT FROM AUTHOR]

The small-signal impedance modeling of a modular multilevel converter (MMC) is the key for analyzing resonance and stability of MMC-based power electronic systems. The MMC is a power converter with a multifrequency response due to its significant steady-state harmonic components in the arm currents and capacitor voltages. These internal harmonic dynamics may have great influence on the terminal characteristics of the MMC, which, therefore, are essential to be considered in the MMC impedance modeling. In this paper, the harmonic state-space (HSS) modeling approach is first introduced to characterize the multiharmonic coupling behavior of the MMC. On this basis, the small-signal impedance models of the MMC are then developed based on the proposed HSS model of the MMC, which are able to include all the internal harmonics within the MMC, leading to accurate impedance models. Besides, different control schemes for the MMC, such as open-loop control, ac voltage closed-loop control, and circulating current closed-loop control, have also been considered during the modeling process, which further reveals the impact of the MMC internal dynamics and control dynamics on the MMC impedance. Furthermore, an impedance-based stability analysis of the MMC-high-voltage direct current connected wind farm has been carried out to show how the HSS-based MMC impedance model can be used in practical system analysis. Finally, the proposed impedance models are validated by both simulation and experimental measurements. [ABSTRACT FROM AUTHOR]

DC distribution power systems are vulnerable to instability because of the destabilizing effect of converter-controlled constant power loads (CPLs) and input filters. Standard stability analysis tools based on averaging linearization techniques can be used only when the switching frequency of the converter is significantly higher than the cutoff frequency of the filter. However, dc distribution systems with a reduced size filter, and consequently a high cutoff frequency, are common in transportation applications. Conventional methods fail to detect instabilities in the system because they do not take into account the switching effect. To overcome this drawback, this paper proposes a discrete-time method to analyze the stability of dc distribution systems. This model is applied here to a dc power system with a CPL. The switching effects and the nonlinearities of the system model are taken into account with a simple discretization approach. The proposed method is able to predict the dynamic properties of the system, such as slow-scale and fast-scale instabilities. An active stabilizer is also included in the system model in order to extend the stability margin of the system. Finally, these observations are validated experimentally on a laboratory test bench. [ABSTRACT FROM AUTHOR]