Search

After any major blackout, recreating the exact scene is one of the crucial but foundation steps in postmortem analysis. This helps in identifying and understanding the exact causes and sequence of events to avoid such failures in the future. Rather, power system restoration demands critical skills which involves deployment of appropriate strategies based on information about various factors, notably the extent and duration of the blackout, location of black-started units, interconnections with neighbouring systems, generator capabilities, and selecting appropriate restoration paths. The actual execution of the restoration plan consists of many surprises of unique nature and a lot of learning’s to avoid future occurrences of such incidents. The restoration efforts and failure of Mumbai grid failure on October 12, 2020, are highlighted in this paper. The paper first proposes formulating the dynamic models to get a better insight of the restoration process in the event of critical issues during this incident. The various challenges faced in systematic recovery of such a large system and lessons learnt from it forms focus of the paper. The paper also discusses factors not covered in existing literature, such as weather, fuel availability, and water mass oscillations which plays an important role in the restoration. [ABSTRACT FROM AUTHOR]

Power system inertia is declining and is increasingly variable and uncertain in regions where the penetration of non-synchronous generation and interconnectors is growing. This presents a challenge to power system operators who must take appropriate actions to ensure the stability and security of power systems relying on short-term forecasts of the system’s inertial response. Existing models to forecast inertia fail to quantify uncertainty, which may prevent their utilization given the risk aversion of the system operators when handling stability issues. This paper is the first to develop a model to produce calibrated, data-driven probabilistic forecasts of the inertia contribution of transmission-connected synchronous generators. The model provides a necessary tool for system operators to quantify forecast uncertainty, allowing them to manage the risk of frequency instability cost-effectively. The paper demonstrates that the assumption of a Gaussian distribution of uncertainty applied in existing models is not acceptable to accurately forecast the inertial response and provides a satisfactory forecast model by combining non-parametric density forecasting with parametric tail distributions. Moreover, the paper shows that satisfactory predictive performance can only be achieved by adopting a rolling horizon forecast approach to deal with the rapidly changing characteristics of the inertial response in power systems. [ABSTRACT FROM AUTHOR]

This paper proposes a Principal Component Analysis (PCA)-based method to construct composite indices to rapidly assess power system transient stability. By assigning appropriate weights to a few selected sub-indicators, a composite index can be constructed to guarantee a better coverage of worst-case stability scenarios of the power system. This paper provides an automatic method to construct a composite index with four sub-indicators calculated by the integral of acceleration, speed deviation and rotor angle of generators over a certain integration period using PCA. The effectiveness of the sub-indicators is validated first, followed by a comprehensive example of process of composite index construction, and the assessment of the influence of the effect of integration period on the performance of the composite index. High accuracy of classification has been demonstrated using composite index with appropriate settings of the integration periods of the sub-indicators. [ABSTRACT FROM AUTHOR]

This paper presents a method for controlling the voltage of inverter-based Microgrids by proposing a new scale-free distributed cooperative controller. The main contribution of this paper is that the proposed distributed cooperative controller is scale-free where is independent of any information about the communication system and the number of distributed generators, as such it works for any Microgrids with any size. Moreover, the communication network is modeled by a general time-varying graph which enhances the resilience of the proposed protocol against communication link failure, data packet loss, and arbitrarily fast plug and play operation in the presence of arbitrarily finite communication delays as the protocol does not require the knowledge of the upper bound on the delay. The stability analysis of the proposed protocol is provided. The proposed method is simulated on the CIGRE medium voltage Microgrid test system. The simulation results demonstrate the feasibility of the proposed scale-free distributed nonlinear protocol for regulating voltage of Microgrids in the presence of communication failures, data packet loss, noise, and degradation. [ABSTRACT FROM AUTHOR]

The stability of power systems can largely limit the power transfer capability limit of transmission lines. The PV generator control is different from synchronous generator control. The impact of PV generator dynamics on the power transfer limit constrained by stability is not well explored in the literature. This paper focuses on improving the stability constrained power transfer capability limit of transmission lines emanating from PV generators. The PV generator is provided with dc link voltage and reactive power control and is equipped with low voltage ride through capability, voltage and frequency support functionalities. In this paper, Lyapunov function analysis based adaptive tuning laws are proposed for PV control parameters to improve the power transfer capability limit (constrained by stability) of transmission lines connecting PV generators to grid. The tuning laws are proposed for Phase Locked Loop (PLL), outer and inner control loop parameters. The proposed tuning laws have inherent robustness towards faults, changes in solar irradiation, changes in grid topology, network impedances, generation and loads in the system. The effectiveness of the proposed method is validated on a Single PV-Synchronous Machine system, modified IEEE-39 and IEEE-118 bus system. The performance of the proposed method is investigated considering various disturbances such as symmetrical and asymmetrical faults on transmission line, switching of a transmission line and change in solar irradiation of PV. Comparison with existing method shows that the proposed tuning method can achieve higher power transfer capability limit considering stability. [ABSTRACT FROM AUTHOR]

As one of the most widely installed utility-scale storage facilities, pumped storage hydro (PSH) plays an essential role in providing flexibility for power systems worldwide. Thus, to accurately quantify the flexibility of PSH units in operational optimization problems is important. The conventional PSH models in the literature rarely consider detailed state transitions due to their hourly-based settings. However, it becomes imperative for operational optimization on short-term intervals, especially with increasing shares of renewable energy in power systems. To this end, this paper presents a novel deterministic PSH model that considers the transition time and trajectory between three states of PSH units in look-ahead dispatch. Moreover, to better characterize the varying efficiency of PSH units with water head and flow rate, this paper proposes to model detailed head-dependent efficiency curves (hereafter called input-output curves) in look-ahead dispatch, which encounters heavy computational burdens when short time intervals are applied. In this work, a zig-zag piece-wise linear approximation method is used for input-output curve modeling. This can enable an accurate quantification for variable efficiency and head dependence in a computationally effective manner. Numerical results are presented to show performances of the proposed PSH model in both flexibility quantification and computation time. [ABSTRACT FROM AUTHOR]

Droop control is a viable method for the operation of island DC microgrids in a decentralized architecture. This paper presents a mixed-integer conic optimization formulation for the design of generator droop control, comprising the parameters of a piecewise linear droop curve. The mixed-integer formulation originates from a stochastic optimization framework that considers several operating scenarios for finding the optimal design. The convexity of the mixed-integer problem continuous relaxation gives global optimality guarantees for the design problem. The paper presents computational results using a tight polyhedral approximation of the conic program, leading to a mixed-integer linear programming (MILP) problem that is solved using a state-of-the-art commercial solver. The results from the proposed approach are contrasted with both a classic linear droop control design and a recent piecewise linear formulation. The Monte-Carlo simulation results quantify the extent to which the MILP solution is superior in reducing voltage violations and power loss, and the degree to which the loss is close to that from a conic optimal power flow solution. [ABSTRACT FROM AUTHOR]

High-quality generator dynamic models are critical to reliable and accurate power systems studies and planning. With the availability of PMUs, measurement-based approach for model validation has gained significant prominence. In this approach, the quality of a model is analyzed by visually comparing measured generator response with the model-based simulated response for large system disturbances. This paper proposes a new set of performance metrics to assess the model validation results to facilitate automation of the model validation process. In the proposed methodology, first, the slow governor response and comparatively faster oscillatory response are separated, and then a separate set of performance metrics is calculated for each of these two components. These proposed metrics quantify the mismatch between the actual and model-based response in a comprehensive manner without missing any information enabling automation of the process. Furthermore, in this paper, we are also proposing that the sensitivity analysis for model calibration be performed with respect to the proposed metrics for the systematic identification of key parameters. Results obtained using both simulated and real-world case-studies validate the effectiveness of the proposed performance metrics for model validation and their application to the sensitivity analysis for model calibration. [ABSTRACT FROM AUTHOR]

Time-domain indirect methods based on Lyapunov stability theory and linear matrix inequality techniques (LMIs) have been applied for delay-dependent stability analysis of large-scale load frequency control (LFC) schemes. This paper aims to enhance the numerical tractability of large-scale LMIs by exploiting the special characteristics of the LFC loops. First, in the typical LFC model, only a few delayed states that are directly influenced by transmission delays are distinguished from other normal system states. Hence, an improved reconstruction model is formed, based on which the delay-dependent stability condition is established with the decreased order of the LMIs and decision variables. Then, to further improve the numerical tractability of the developed stability criterion, all weighting matrices required in the augmented Lyapunov functional are enforced to have structural restrictions by proposing an extended symmetry-exploiting technique. Case studies show that the method proposed in this paper significantly improves the calculation efficiency of stability criterion established for multi-area power systems at the cost of only a minor reduction in computational accuracy. [ABSTRACT FROM AUTHOR]

Pricing multi-interval economic dispatch of electric power under operational uncertainty is considered in this two-part paper. Part I investigates dispatch-following incentives of profit-maximizing generators and shows that, under mild conditions, no uniform-pricing scheme for the rolling-window economic dispatch provides dispatch-following incentives that avoid discriminative out-of-the-market uplifts. A nonuniform pricing mechanism, referred to as the temporal locational marginal pricing (TLMP), is proposed. As an extension of the standard locational marginal pricing (LMP), TLMP takes into account both generation and ramping-induced opportunity costs. It eliminates the need for the out-of-the-market uplifts and guarantees full dispatch-following incentives regardless of the accuracy of the demand forecasts used in the dispatch. It is also shown that, under TLMP, a price-taking market participant has incentives to bid truthfully with its marginal cost of generation. Part II of the paper extends the theoretical results developed in Part I to more general network settings. It investigates a broader set of performance measures, including the incentives of the truthful revelation of ramping limits, revenue adequacy of the operator, consumer payments, generator profits, and price volatility under the rolling-window dispatch model with demand forecast errors. [ABSTRACT FROM AUTHOR]

This paper proposes a novel inertia-enhanced distributed control method to complement the inertia of microgrids. The rate of change of frequency (RoCoF) and the rate of change of voltage (RoCoV) are employed in this paper to quantify the frequency inertia and voltage inertia, respectively. Then, a fully distributed algorithm with constrained changing rates is proposed. By bounding the changing rates of frequency and voltage during the consensus control, the algorithm can address the consensus problem while enhancing the inertia of microgrids. Compared with most inertia control methods, the proposed method can utilize the reserve power of scattered DGs to supply inertia. Besides, it performs better under disturbances and delays than conventional distributed control methods. The effectiveness of the proposed method is validated by several cases in MATLAB/Simulation and a hardware experiment. [ABSTRACT FROM AUTHOR]

This paper develops a supervised learning of overcomplete dictionaries (SLOD) to efficiently perform online analysis and prediction of dynamic stability (DSP) in large power systems. To this end, multiple post-contingency signals with varying faults, load and generator switching are acquired by phasor measurement units (PMUs) based monitoring of all generators to form the training dataset. The SLOD approach then jointly learns a sparse feature dictionary and a stability status classifier using dynamic singular value decomposition (D-KSVD) and orthogonal matching pursuit (OMP). The aim is to learn features of the signals while adding a stability status term to the optimization problem. This enabled stable/unstable classes to be represented. The proposed SLOD manages to improve online DSP shortly after a contingency. It does this without any prior assumptions or signal preprocessing except for dynamic state estimation to get rotor speed from generator terminal PMU data. Test results on the IEEE 2-area 4 machines, 39 and 68 -bus test systems demonstrate that the SLOD gives more than satisfactory performance in all cases (i.e., ∼99.99% accuracy, ∼99.99% reliability, and 100% security) compared to Statistics and Machine Learning Toolbox™ -MATLAB that use time-series-based high-dimensional stability indices as input for DSP. [ABSTRACT FROM AUTHOR]

The increasing complexity of modern AC/DC power systems poses a significant challenge to a fast solution of large-scale transient stability simulation problems. This paper proposes the hybrid parallel-in-time-and-space (PiT+PiS) transient simulation on the CPU-GPU platform to thoroughly exploit the parallelism from time and spatial perspectives, thereby fully utilizing parallel processing hardware. The respective electromechanical and electromagnetic aspects of the AC and DC grids demand a combination of transient stability (TS) simulation and electromagnetic transient (EMT) simulation to reflect both system-level and equipment-level transients. The TS simulation is performed on GPUs in the co-simulation, while the Parareal parallel-in-time (PiT) scheduling and EMT simulation are conducted on CPUs. Therefore, the heterogeneous CPU-GPU scheme can utilize asynchronous computing features to offset the data transfer latency between different processors. Higher scalability and extensibility than GPU-only dynamic parallelism design is achieved by utilizing concurrent GPU streams for coarse-grid and fine-grid computation. A synthetic AC/DC grid based on IEEE-118 Bus and CIGRÉ DCS2 systems showed a good accuracy compared to commercial TSAT software, and a speedup of 165 is achieved with 48 IEEE-118 Bus systems and 192 201-Level detail-modeled MMCs. Furthermore, the proposed method is also applicable to multi-GPU implementation where it demonstrates decent efficacy. [ABSTRACT FROM AUTHOR]

Being important information of both network conditions and energy trading, distribution locational marginal prices (DLMPs) are greatly useful for distribution network (DN) management. The goal of this paper is to develop a market mechanism that motivates price-making agents to trade active and reactive power at DLMPs. According to the optimal power flow problem based on second-order cone (SOC) relaxation, we first design the market rules that allow agents to strategically submit proposals of price and power generation/consumption. The market rules induce a noncooperative game between the DN operator and distributed generators. We prove that DLMP pricing can be implemented at any generalized Nash equilibrium (GNE) of the game. We also show that economic properties of strong budget balance, individual rationality, and system cost minimization can be achieved at any GNE. A decentralized algorithm is developed to reach a GNE of the game. Further, based on the convex-concave procedure, an extension of the market mechanism is proposed to cope with the situations that SOC relaxation is inexact. In simulation, the proposed market mechanism is compared with other game-theoretic models, and the economic properties are verified. [ABSTRACT FROM AUTHOR]

Online transient analysis plays an increasingly important role in dynamic power grids as the renewable generation continues growing. Traditional numerical methods for transient analysis not only are computationally intensive but also require precise contingency information as input, and therefore, are not suitable for online applications. Existing online transient assessment studies focus on the determination of post-contingency system stability or stability margin. This paper develops a novel graph-learning framework, Deep-learning Neural Representation or DNR, for online prediction, of the time-series trajectories of the system states using initial system responses that can be measured by phasor measurement units (PMUs). The proposed DNR framework consists of two sequential modules: a Network Constructor that captures network dependencies among generators, and a Dynamics Predictor that predicts the system trajectories. The key to improved prediction performance is the introduction of the spatio-temporal message-passing operations into graph neural networks with structural knowledge. Its effectiveness and scalability are validated through comparative studies, demonstrating the prediction performance under different contingency scenarios for systems of different sizes. This framework provides a solution to online predicting post-fault system dynamics based on real-time PMU measurements. Additionally, it can also be applied to facilitate the offline transient simulation without simulating the entire trajectories. [ABSTRACT FROM AUTHOR]

Unified power flow controller (UPFC) gains growing application in power systems due to its power flow regulation ability. However, there is still a dilemma in the incorporation of UPFC into security-constrained economic dispatch (SCED). The modeling of UPFC involves nonlinear and nonconvex operational constraints, which is difficult to solve efficiently and accurately. Conventional methods adopted Taylor expansion or sensitivity analysis to realize the convexification of UPFC models, which leads to a loop structure and is subject to initial point choice. In this paper, a novel three-terminal injected UPFC model is proposed. In the proposed model, the voltage source variables are eliminated completely. Instead, only power injection variables are introduced to equivalently describe physical characteristics and constraints of UPFC. The nonlinear and nonconvex operational constraints of UPFC are transformed into mixed integer second-order cone form. Moreover, compared with conventional UPFC models, the control characteristic of UPFC is considered in a more accurate and practical manner in the proposed SCED, which helps to prevent potential risks of power flow over-limit under N-1 contingencies. Simulation results show the effectiveness and efficiency of the established solution. [ABSTRACT FROM AUTHOR]

Achieving the low-carbon transition of power systems requires the coordination of renewable energy generation and other emerging electricity technologies. Their technical indicators are changing rapidly since these technologies are in the initial stages of development. Determining the technical and policy targets for achieving the low-carbon transition is critical for regulators and power system planners. This paper defines this problem as a backcasting problem, whose concept is derived from environmental science research. We introduce it into the power system planning field and innovatively model it as a bi-level optimization problem. According to the characteristics of the backcasting problem, an improved barrier method is proposed to solve it efficiently. The effectiveness of the proposed model and algorithm are verified through case studies on a modified Garver’s 6-bus system and a realistic Northwest China power system, and they are compared with state-of-the-art solution techniques. The results of the backcasting problem provide a new perspective on the economic impacts of the low-carbon transition and are helpful in energy policy formulation for power systems. [ABSTRACT FROM AUTHOR]

Under future low-carbon scenarios, it will be crucial to boost the rapidity in the delivery of frequency response services, especially those provided by conventional generators. This paper proposes a novel framework for the scheduling of frequency response services that incentivizes a rapid response from different system assets, including conventional generators. Differently from other approaches which envisage a fixed delivery time for frequency response services, the proposed methodology implements time-varying delivery intervals, which coincide with the time of frequency nadir occurrence. A relevant set of linearized constraints is embedded in a typical power system scheduling model. Results indicate that the proposed methodology reduces the unnecessary overscheduling associated with traditional methodologies, leading to significant operational cost savings. [ABSTRACT FROM AUTHOR]

Despite cascading failures being the central cause of blackouts in power transmission systems, existing operational and planning decisions are made largely by ignoring their underlying cascade potential. This paper posits a reliability-aware AC Optimal Power Flow formulation that seeks to design a dispatch point which has a low operator-specified likelihood of triggering a cascade starting from any single component outage. By exploiting a recently developed analytical model of the probability of component failure, our Failure Probability-constrained ACOPF (FP-ACOPF) utilizes the system’s expected first failure time as a smoothly tunable and interpretable signature of cascade risk. We use techniques from bilevel optimization and numerical linear algebra to efficiently formulate and solve the FP-ACOPF using off-the-shelf solvers. Extensive simulations on the IEEE 118-bus case show that, when compared to the unconstrained and N-1 security-constrained ACOPF, our probability-constrained dispatch points can significantly lower the probabilities of long severe cascades and of large demand losses, while incurring only minor increases in total generation costs. [ABSTRACT FROM AUTHOR]

This paper focuses on the issue of network connectedness (NC) in security-constrained optimal transmission switching problems, which is complicated by branch contingencies and corrective line switching. Two criteria are firstly proposed with the principle of preserving NC as much as possible within reasonable limits. By extending the electrical flow based NC constraints, a proposition is derived to associate different cases of NC with the optimum of a linear program, yielding the mathematical formulation of the NC criteria. By Karush-Kuhn-Tucker conditions, this formulation is further transformed into a tractable version which can be incorporated with existing SCOTS models without affecting the applicability of original solution approaches. Finally, case studies on various networks and SCOTS models demonstrate the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper discusses battery storage formulations and analyzes the impact of the constraints on the computational performance of security constrained unit commitment (SCUC). Binary variables are in general required due to mutual exclusiveness of charging and discharging modes. We use valid inequalities to improve the SOC constraints. Adding batteries to the MISO day ahead market clearing cases reveals the impact of binary variables and the valid inequalities on SCUC solving time. Warm start and lazy constraint techniques are applied to improve the performance and make the valid inequalities more effective, reducing computation time to acceptable levels for implementation. [ABSTRACT FROM AUTHOR]

Multi-interval or dynamic economic dispatch (D-ED) is the core of various power system management functions. This optimization problem contains many constraints, a small subset of which is sufficient to enclose the D-ED feasible region. This paper presents a topology-aware learning-aided iterative constraint screening algorithm to identify a feasibility outlining subset of network and generating units ramp up/down constraints and create a truncated D-ED problem. We create a colorful image from nodal demand, thermal unit generation cost, and network topology information. Convolutional neural networks are trained for constraint status identification using colorful images corresponding to system operating conditions and transfer learning. Filtering inactive line flow and ramp up/down constraints reduces the optimization problem's size and computational burden, resulting in a reduction in solution time and memory usage. Dropping all inactive branch and ramp constraints may activate some of these originally inactive constraints upon solving the truncated D-ED. A loop is added to form a constraints coefficient matrix iteratively during training dataset preparation and algorithm utilization. This iterative loop guarantees truncated D-ED results feasibility and optimality. Numerical results show the proposed algorithm's effectiveness in constraint status prediction and reducing D-ED size and solution time. [ABSTRACT FROM AUTHOR]

The time required to restore distribution systems following an extreme event is highly dependent on damage assessment. Waiting for field assessors patrolling the feeders to identify fault locations is a bottleneck in improving restoration efficiency. This paper proposes an optimal service restoration model for resilient distribution systems considering the coordination with damage assessment, as a contribution to earlier studies. The restoration actions such as fault isolation, network reconfiguration, crew mobilization and fault repair are brought forward to the damage assessment stage and the restoration schedules are dynamically updated with the reveal of the damage status. The relationship between fault location, switch status and node status is established to optimize the network topology and guarantee crew operation safety under the condition that the network has multiple faults or unchecked potential faulted areas. Moreover, the crew routing formulations are modified to enable fault isolation and load island reconnection by manual switches during the restoration process. Case studies validate the effectiveness of the proposed model in reducing load shedding and restoration duration. [ABSTRACT FROM AUTHOR]

This paper proposes a data-driven small-signal stability constrained optimal power flow (SSSC-OPF) method with high computational efficiency. Instead of repeating the computational expense small-signal stability analysis via differential and algebraic equations during the iterative OPF process, a computationally cheap surrogate constraint for small-signal stability is developed. To reduce the learning difficulty for small-signal stability boundaries, an efficient sample generation strategy is proposed with sampling space compression. This allows us to use the support vector machine (SVM) with a kernel function to derive the explicit data-driven surrogate constraint for small-signal stability. Penalty factor optimization is proposed to compensate for the error caused by SVM. The learned small-signal stability constraint is embedded into the OPF model for generator control. An examination strategy is also developed to avoid the small-signal instability of re-dispatch caused by the error of the data-driven surrogate model. Comparison results with other model-based and data-driven methods on the IEEE 39-bus and 118-bus systems demonstrate the high computational efficiency and economic benefits of the proposed method. [ABSTRACT FROM AUTHOR]

Penetration of renewable energy resources (RERs) in the power grid continues to increase as we strive toward a greener environment for the future. While they have many advantages, most RERs possess little or no rotational kinetic energy, thereby threatening the frequency stability of future power grids. Energy storage systems (ESSs) can be used to mitigate this problem, as they are capable of providing virtual inertia to the system. This paper proposes a novel analytical approach for sizing ESSs to provide inertial support to the grid and maintain frequency stability in presence of RERs. This method analytically estimates the total inertia of the system using probability distributions of the outage states of conventional generators and RERs. RERs are modeled as multi-state units, considering the variability of their output power due to changes in weather conditions and also the forced outages of their equipment. The ESS is utilized to provide virtual inertia to the grid in the form of active power once the estimated system inertia falls below the minimum required during a disturbance. The efficacy of the proposed approach is tested on the IEEE 39 bus system and the results obtained by the analytical approach are validated using Monte Carlo simulation. [ABSTRACT FROM AUTHOR]

The inertia information of both synchronous generators (SGs)/equivalent SGs and converter interfaced generators (CIGs) are crucial to maintain the frequency stability of modern power grids. This paper proposes a novel data-driven method using ambient measurements, which seems to be the first method that can estimate the inertia constants of SGs/equivalent SGs and the virtual inertia constants of CIGs simultaneously without disturbing the system’s normal operating condition. Numerical studies in the IEEE 68-bus system demonstrate that the developed estimation method can estimate the inertia constants of different generation units accurately and is robust to measurement noises, missing measurements and the variation of operating conditions. [ABSTRACT FROM AUTHOR]

The identification of generator coherency is crucial to design intentional controlled power system islanding. Due to high penetration of nonsynchronous generation, power system inertia changes both temporally and spatially. Thus, the dynamics in system oscillations and associated slow coherency of generators are directly affected by this. Therefore, their sensitivity deserves investigation. In this paper, the slow coherency with variable inertia is systematically discussed by incremental analysis. Specifically, the approach to study the impacts of variable inertia, based on the matrix perturbation theory, is deployed to provide the explicit eigen-solution sensitivity of slow coherency. To investigate the dependency of coherency grouping on inertia, the changing trends of eigenvector and possible alteration of coherency grouping are estimated. The unusual and abrupt alteration of slow coherency is observed in special scenarios near to modal resonance, i.e. close eigenvalue. The analysis in such scenarios was hardly found in the previous work of coherency sensitivity. Since close eigenvalue can make the traditional matrix perturbation inapplicable, the feasible perturbation in such special scenarios is proposed in this paper. The proposed approach has been thoroughly tested using the classic IEEE 118-bus system. The quantitative results are compared with those obtained analytically. [ABSTRACT FROM AUTHOR]

This paper presents a new framework for multistage expansion planning in active power distribution networks, in which the distribution system operator (DSO) considers active network management by clearing the local energy market at the distribution level. The proposed model is formulated as a bi-level optimization problem, where the upper level minimizes the net present value of the total costs imposed to DSO associated with the investment and maintenance of the network assets as well as the network operation, while the lower level on clearing the local energy market captures the participation of distributed energy resource (DER) owners and demand aggregators to maximize the social welfare. The expansion plans consider the investments in DER owners’ assets as well as variety of network assets in which the profitability of DER owners’ investment is guaranteed. The Karush-Kuhn-Tucker optimality conditions and the strong duality theory are employed through which the model is converted to a mixed integer linear programming optimization problem. The implementation of the suggested model on the 24-bus and 86-bus distribution test systems validates its performance and efficacy in making cost-effective planning decisions. [ABSTRACT FROM AUTHOR]

Emergency frequency control is one of the most critical approaches to maintain power system stability after major disturbances. With the increasing number of grid-connected renewable energy sources, existing model-based methods of frequency control are facing up with challenges of computational speed and scalability for large-scale systems. In this paper, the emergency frequency control problem is formulated as a Markov Decision Process and solved through a novel distributional deep reinforcement learning (DRL) method, namely the distributional soft actor critic (DSAC) method. Compared with other reinforcement learning methods that only estimate the mean value, the proposed DSAC model estimates the distribution of value function over returns. This advancement can lead to more insights and knowledge for the agent, with the benefit of a much faster and more stable learning process, and the improved frequency control performance. The simulation results on IEEE 39-bus and IEEE 118-bus systems demonstrate the effectiveness and robustness of proposed models, as well as the advantage compared to other state-of-the-art DRL algorithms. [ABSTRACT FROM AUTHOR]

Linear droop control is a standard approach for the decentralized operation of AC microgrids. While the traditional design of the real and reactive power droop functions does not consider economic aspects, recent approaches present modifications to enable least-cost operation. This paper proposes mixed-integer conic programming (MICP) for computing the real and reactive power droop parameters from a stochastic optimization framework that captures several snapshots of the microgrid’s operation. The model permits distributed generation to switch between grid-forming and grid-feeding modes. Unlike previous works, MICP provides droop parameters that are globally optimal for the design scenarios. Numerical results show that using traditional linear cost-based droop design methods may result in voltage magnitude violations. In contrast, the proposed method gives a solution free of violations and is yet more economical. [ABSTRACT FROM AUTHOR]

Ferry contributing a significant amount of greenhouse gas is one of the critical vessels to be electrified. Designing a power system for a ferry with hybrid-shaft generators is different from designing a power system for other vessels because of its fixed route. More clearly, ferries repeatedly travel between their port of origin and port of destination, and before the next voyage, the battery must be recharged to the initial state so that the optimal energy management scheme can be repeatedly applied. Furthermore, the flexibility of hybrid-shaft generators, which allow more fuel saving, increases design complexity. In this paper, a mixed-integer non-linear programming problem is first formulated, and a power management algorithm with an initialization step for fulfilling the battery recharging requirement and a refinement step for minimizing the fuel consumption is proposed. The simulation results obtained from data of an actual ferry show that the proposed power management algorithm can fully recharge the battery and consumes less fuel than a rule-based power management scheme. Simulations also reveal that fuel consumption depends on available shore power, highlighting the necessity to develop charging infrastructure for practical electrification. Because of its speed, the algorithm can support hardware sizing, e.g., battery sizing. [ABSTRACT FROM AUTHOR]

Regarding the continuing increase of anthropogenic carbon emissions in the power system with growing energy consumption, researchers have focused on managing the demand side to achieve low-carbon transition. However, such a low-carbon transition cannot be achieved effectively without the proper incentive scheme. Moreover, it is desired to improve the computation quality of carbon tracing tools and extend their applications by state-of-art techniques. To fulfil these existing research gaps, this paper proposes a low-carbon optimal scheduling model with demand response (DR) based carbon intensity control. It aims to reduce the dependence of customers on energy sources with high carbon intensities while decreasing reasonable energy consumption. Likewise, a data-driven approach conducted with the Bayesian interfere regression is proposed to carry out the carbon emission flow (CEF) model to cope with the drawbacks of the conventional emission calculation. Moreover, the storage emission and relevant dynamic impacts to the system are fully considered. The proposed data-driven approach is tested on a series of IEEE systems with different sizes, its high accuracy and efficiency are proved by the simulation results. Further, simulation results indicate that the proposed scheduling model can effectively achieve carbon emission mitigation. [ABSTRACT FROM AUTHOR]

The reduced inertia levels in low-carbon power grids necessitate explicit constraints to limit frequency’s nadir and rate of change during scheduling. This can result in significant curtailment of renewable energy due to the minimum generation of thermal plants that are needed to provide frequency response (FR) and inertia. Additional consideration of fast FR, a dynamically reduced largest loss and under frequency load shedding (UFLS) allows frequency security to be achieved more cost effectively. This paper derives a novel constraint from the swing equation to contain the frequency nadir using all of these services. The expected cost of UFLS is found probabilistically to facilitate its comparison to the other frequency services. We demonstrate that this constraint can be accurately and conservatively approximated for moderate UFLS levels with a second order cone (SOC), resulting in highly tractable convex problems. Case studies performed on a Great Britain 2030 system demonstrate that UFLS as an option to contain single plant outages can reduce annual operational costs by up to $\pounds $ 559 m, 52% of frequency security costs. The sensitivity of this value to wind penetration, abundance of alternative frequency services, UFLS amount and cost is explored. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy, accurate and efficient probabilistic optimal power flow (POPF) calculation becomes more and more important to provide decision support for secure and economic operation of power systems. This paper develops a novel nonparametric probabilistic optimal power flow (N-POPF) model describing the probabilistic information by quantiles, which avoids any parametric probability distribution assumptions of random variables. A novel critical region integral method (CRIM) which combines the multiparametric programming theory and discrete integral is proposed to efficiently solve the N-POPF problem. In the CRIM, the critical region partitioning algorithm is firstly introduced into the POPF model to directly establish the mapping relationship from wind power to optimal solutions of the POPF problem. Besides, a discrete integral method is developed in the CRIM to achieve the probability convolution calculation based on quantiles. Comprehensive numerical experiments verify the superior performance of the proposed CRIM in estimation accuracy and computational efficiency, and demonstrate that N-POPF model significantly improves the accuracy of uncertainty analysis. In general, the proposed N-POPF model and CRIM form a new framework of POPF problem for power system analysis and operation. [ABSTRACT FROM AUTHOR]

This paper proposes a novel machine-learning approach for predicting AC-OPF solutions that features a fast and scalable training. It is motivated by the significant training time needed by existing machine-learning approaches for predicting AC-OPF. The proposed approach is a 2-stage methodology that exploits a spatial decomposition of the power network that is viewed as a set of regions. The first stage learns to predict the flows and voltages on the buses and lines coupling the regions, and the second stage trains, in parallel, the machine-learning models for each region. The predictions can then seed a power flow to eliminate the physical constraint violations, resulting in minor violations only for the operational bound constraints. Experimental results on the French transmission system (up to 6,700 buses) and large test cases from the pglib library (up to 9,000 buses) demonstrate the potential of the approach. Within a short training time, the approach predicts AC-OPF solutions with very high fidelity, producing significant improvements over the state-of-the-art. The proposed approach thus opens the possibility of training machine-learning models quickly to respond to changes in operating conditions. [ABSTRACT FROM AUTHOR]

This paper proposes a novel modeling framework and decomposition-based solution strategy combining stochastic programming (SP) and robust optimization (RO) to deal with multiplex uncertainties in coordinated mid- and long-term power system planning. The problem is formulated as a multi-year generation and transmission planning problem from an independent system operator (ISO)’s perspective to minimize both expansion and operational costs under binary and continuous uncertainties, ${\bf i.e.}$ , system component contingency and load/generation variation. N- $\bf {k}$ contingencies are captured in RO using the reformulated contingency criteria, while the load/generation uncertainty is considered in SP embedded with RO using operating scenarios generated from the historical data with spatiotemporal correlations. The original hybrid model is highly intractable, but the intractability can be relieved by the proposed decomposition strategy based on the column-and-constraint generation and L-shaped algorithms. We apply our model to perform long-term system planning under extremely high renewable penetration and investigate the case of 100% renewables in long-term planning. Numerical experiments on multi-scale test systems verify the efficacy of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper presents a methodology for the design of over-frequency containment schemes in low inertia, high renewable systems. This methodology is demonstrated through the comprehensive redesign of the containment scheme for significant over-frequency events (e.g., the loss of an exporting HVDC interconnector) in the Ireland and Northern Ireland power system (All-Island System). The new scheme allows an existing synchronous generator runback system integrity protection scheme to be replaced with fixed wind tripping and dynamic response from wind. This exploits the capabilities of renewable generation to create effective protection and control resources. The methodology provides the steps required to determine the key parameters of the scheme (e.g., maximum allowable frequency, required volume of tripping, lowest trip frequency). A key consideration of the methodology is the volume of dynamic response from wind that can be deployed before frequency limits are violated (e.g., inertia and wind penetration). Dynamic simulations are performed in DSE Tools for the All-Island system considering a 2020 operational scenario. These simulations support the application of the methodology and demonstrate the effectiveness of the scheme designed for the All-Island system. [ABSTRACT FROM AUTHOR]

This paper addresses the incorporation of transmission switching in the contingency-constrained unit commitment problem within the context of co-optimized electricity markets for energy and reserves. The proposed generation scheduling model differs from existing formulations due to the joint consideration of four major complicating factors. First, transmission switching actions are considered both in the pre- and post-contingency states, thereby requiring binary post-contingency variables. Secondly, generation scheduling and transmission switching actions are co-optimized. In addition, the time-coupled operation of generating units is precisely characterized. Finally, practical features of modern power systems, such as uncertain nodal net injections and the operation of energy storage, are also considered. The proposed model is cast as a challenging mixed-integer program for which the off-the-shelf software customarily used for simpler models may lead to intractability even for moderately-sized instances. In order to circumvent this computational issue, this paper presents an enhanced and novel application of an exact nested column-and-constraint generation algorithm featuring the inclusion of valid constraints to improve the overall computational performance. Numerical simulations based on the IEEE 118- and 300-bus systems demonstrate the effective performance of the proposed approach as well as its economic and operational advantages over existing models disregarding post-contingency transmission switching. [ABSTRACT FROM AUTHOR]

Determining contingency aware dispatch decisions by solving a security-constrained optimal power flow (SCOPF) is challenging for real-world power systems, as the high problem dimensionality often leads to impractical computational requirements. This problem becomes more severe when the SCOPF has to be solved not only for a single instance, but for multiple periods, e.g. in the context of electricity market analyses. This paper proposes an algorithm that identifies the minimal set of constraints that exactly define the space of feasible nodal injections for a given network and contingency scenarios. By internalizing the technical limits of the nodal injections and enforcing a minimal worst-case impact of contingencies to line flows, computational effort can be further improved. The case study applies and analyzes the methods on the IEEE 118 and A&M 2000 bus systems, as well as the German and European transmission systems. In all tested cases the proposed algorithm identifies at least 95% of the network and security constraints as redundant, leading to significant SCOPF solve time reductions. Scalability and practical implementation are explicitly discussed. The code and input data of the case study is published supplementary to the paper under an open-source license. [ABSTRACT FROM AUTHOR]

We consider a distributed optimal power flow formulated as an optimization problem that maximizes a nondifferentiable concave function. Solving such a problem by the existing distributed algorithms can lead to data privacy issues because the solution information exchanged within the algorithms can be utilized by an adversary to infer the data. To preserve data privacy, in this paper we propose a differentially private projected subgradient (DP-PS) algorithm that includes a solution encryption step. We show that a sequence generated by DP-PS converges in expectation, in probability, and with probability 1. Moreover, we show that the rate of convergence in expectation is affected by a target privacy level of DP-PS chosen by the user. We conduct numerical experiments that demonstrate the convergence and data privacy preservation of DP-PS. [ABSTRACT FROM AUTHOR]

This paper proposes a cascading failure simulation (CFS) method and a hybrid machine learning method for vulnerability analysis of integrated power-gas systems (IPGSs). The CFS method is designed to study the propagating process of cascading failures between the two systems, generating data for machine learning with initial states randomly sampled. The proposed method considers generator and gas well ramping, transmission line and gas pipeline tripping, island issue handling and load shedding strategies. Then, a hybrid machine learning model with a combined random forest (RF) classification and regression algorithms is proposed to investigate the impact of random initial states on the vulnerability metrics of IPGSs. Extensive case studies are carried out on three test IPGSs to verify the proposed models and algorithms. Simulation results show that the proposed models and algorithms can achieve high accuracy for the vulnerability analysis of IPGSs. [ABSTRACT FROM AUTHOR]

Uncertainty arising from renewable energy results in considerable challenges in optimal power flow (OPF) analysis. Various chance-constrained approaches are proposed to address the uncertainty within OPF models. However, most existing approaches either assume that the uncertainty distributions are known a priori or consider individual chance constraint modeling. This paper proposes a distributionally robust (DR) joint chance-constrained OPF model, which ensures that the operational constraints are simultaneously satisfied with a given probability and does not require an assumption of specific probability distributions. An ambiguity set built on the first two moments is used to model the uncertainty. An optimized Bonferroni approximation (OBA) is first introduced to decompose the DR joint chance constraint into DR individual chance constraints. The resulting OBA formulation is strongly nonconvex. Different convex approximations are then proposed to formulate the OBA formulation as tractable forms. The proposed convex approximations can be easily extended to incorporate the structural information associated with uncertainty, and correlations among reserve chance constraints. Case studies demonstrate the effectiveness of the proposed convex approximation methods and their extensions. [ABSTRACT FROM AUTHOR]

In this paper, a distributed predefined-time fractional-order sliding mode controller (DPTFOSMC) is proposed for performance improvement of power system. The proposed DPTFOSMC is designed based on the multi-agent framework and distributed control theory, which can reduce the pressure of central controller in communication and calculation, thus obtaining fast and coordinated response. The DPTFOSMC can achieve the advantages of sliding mode control (SMC) with fast response and strong robustness for the power system. In addition, the power system under the proposed DPTFOSMC can be stabilized in stable range within a predefined time which is directly equal to the tunable parameter, thus meeting the high requirement for convergence time of the power system. The prescribed performance function (PPF) is carried out to design the DPTFOSMC, which can ensure that the power system can achieve the expected transient and steady responses. Meanwhile, fractional calculus is implemented to devise the DPTFOSMC to eliminate the chattering phenomenon of conventional SMC. The Lyapunov function is adopted to analysis the predefined-time stability of the power system under the proposed DPTFOSMC. Simulations are taken to validate the effectiveness and superior performance of the proposed DPTFOSMC for the power system. The results show that the DPTFOSMC can ensure the power system to achieve superior performances than the existing control methods. [ABSTRACT FROM AUTHOR]

With theincreased penetration of renewable sources, power gridsare becoming stressed due to fluctuating generation. To alleviate stress from inconsistent sources, utilities employ energy storage systems alongside renewable sources and rely on dispatching synchronous generators. However, optimal dispatch of such devices is limited by traditional AC optimal power flow methods that do not account for time-dependent constraints, such as the state of charge of energy storage systems and generator ramping constraints. Multi-period optimal power flow is proposed as a large non-convex non-linear problem to optimally dispatch and control generators and energy storage elements across multiple time periods. In this paper, we introduce a scalable, robust framework to solve multi-period optimal power flow using a differential dynamic programming scheme that makes it capable of scaling to large systems containing energy storage devices. We demonstrate the efficacy of this solution by optimizing the SyntheticUSA testcase over a set of time periods. A robust homotopy method is applied to achieve fast simulation times that can be parallelized for further improvements. [ABSTRACT FROM AUTHOR]

Due to the increasing integration of distributed energy resources (DERs) into the national grid, research is needed to understand high DER penetration in relation to grid reliability and stability. Emulation-based research is a viable option to consider hardware intensive investigations. Indeed, DER emulation-based research has advantages over DER software-based simulation and real DER implementation research. Some of these advantages are more realistic performance and boundaries and considerably less expense, higher safety, and modularity. While the downside of DER emulation-based research is the complexity of modeling large scale grid systems. This paper provides a rationalization for the selection of an emulation-based DER laboratory and description of the DER laboratory’s capabilities. Additionally, guidelines for running experiments are discussed and two approaches, power scaling using rescaling coefficients and system sizing using Multi-Port Thevenin Equivalence (MPTE), are proposed to emulate realistic complex interconnected DER grid connected systems. [ABSTRACT FROM AUTHOR]

The output of renewable generation depends on the real-time weather conditions and changes rapidly; so the economic operating point of the power system varies over time. This paper aims to find the explicit mapping from variable renewable power to optimal power flow solutions. To this end, we propose a parametric distribution optimal power flow (P-DOPF) method, which gives the optimal dispatch strategy and power flow status as analytical functions of the renewable output. With the established distribution optimal power flow problem based on the relaxed Distflow model, the first step is to perform a global polyhedral approximation on the second-order cone constraints to develop a linearized formulation. The second step is to obtain the P-DOPF model by treating renewable power output as parameters; then, the P-DOPF problem gives rise to a multi-parametric linear program (mp-LP). Third, we prove that the optimal solution and optimal value of the P-DOPF are piecewise linear functions of the parameters and we design an adaptive-sampling algorithm to construct the optimal value and optimal solution functions, as well as the partition of the parameter set, subject to a given error tolerance; this algorithm is not influenced by model degeneracy, a common difficulty of existing mp-LP algorithms. The P-DOPF framework provides an explicit real-time control policy of generators in response to the renewable output. Case studies on the IEEE 33 and 69-bus systems verify the effectiveness and performance of the proposed method; by comparison, the proposed method outperforms the established affine policy method in computational efficiency and optimality by 24.5% and 4.62%, respectively. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy, frequency response and its security are of significant concerns for reliable power system operations. Frequency-constrained unit commitment (FCUC) is proposed to address this challenge. Despite existing efforts in modeling frequency characteristics in unit commitment (UC), current strategies can only handle oversimplified low-order frequency response models and do not consider wide-range operating conditions. This paper presents a generic data-driven framework for FCUC under high renewable penetration. Deep neural networks (DNNs) are trained to predict the frequency response using real data or high-fidelity simulation data. Next, the DNN is reformulated as a set of mixed-integer linear constraints to be incorporated into the ordinary UC formulation. In the data generation phase, all possible power injections are considered, and a region-of-interest active sampling is proposed to include power injection samples with frequency nadirs closer to the UFLC threshold, which enhances the accuracy of frequency constraints in FCUC. The proposed FCUC is investigated on the IEEE 39-bus system. Then, a full-order dynamic model simulation using PSS/E verifies the effectiveness of FCUC in frequency-secure generator commitments. [ABSTRACT FROM AUTHOR]

Accurate models of power plants play an important role in maintaining the reliable and secure grid operations. In this paper, we propose a synchrophasor measurement-based generator parameter calibration method by a novel deep learning method with high computational efficiency. An elementary effects-based approach is developed to identify the critical parameters from a nonlinear system with much better performance than the widely used trajectory sensitivity-based method. Then, synchrophasor measurement-based conditional variational autoencoder is developed to estimate the parameters’ posterior distributions even in the presence of a high-dimensional case with eighteen critical parameters to be calibrated. The effectiveness of the proposed method is validated for a hydro generator with a very detailed model. The results show that the proposed approach can accurately and efficiently estimate the generator parameters’ posterior distributions even when the parameters true values are not in support of the prior distribution. [ABSTRACT FROM AUTHOR]

The utilization of aggregated demand-side flexibility via demand response (DR) has become a promising pathway for the integration of renewable energy resources in power systems. Nowadays, there are several management strategies for DR such as the price-based transactive control strategies. However, many of such existing price-based control strategies neglect the physics and operational constraints of the underlying distribution networks when computing the price, raising concerns regarding their theoretical and practical values. This paper studies this issue and investigates optimal DR (ODR) by incorporating the distribution locational marginal price (DLMP). In particular, we discuss DR in connection with DLMPs and propose a multi-period bilevel optimization problem to find the ODR strategy. The objective is to minimize the peak load, load fluctuation, and payments of load aggregators. In addition, a robust bilevel ODR model is formulated to provide a robust ODR strategy while minimizing operating costs under the worst-case realization of uncertainties; this mitigates the impact of forecasting errors on renewable energy resources. Then, we propose an efficient solution approach by employing the Karush-Kuhn-Tucker conditions and strong duality. Simulation results are presented to illustrate the mutual impacts of the interaction between DR and DLMP and the benefits of the robust ODR strategy. [ABSTRACT FROM AUTHOR]

Reducing uplift payments has been a challenging problem for most wholesale markets in the U.S. The main difficulty comes from the discrete decision-making and non-linear objective function in the unit commitment (UC) problem. Recently, the convex hull pricing approach has shown promises to reduce the uplift payments, in which efficient algorithms are available when i) the convex hull description for each unit and ii) the convex envelope for the objective function are available. Following this framework, in this paper, we provide network-flow-based compact extended formulations for each UC considering ramping constraints, different initial statuses, and maximum start-up restrictions. Meanwhile, by using a piece-wise linear approximation of a quadratic cost curve in the objective function, we show that the corresponding piece-wise linear convex envelope converges to the quadratic envelope as the number of pieces increases in the convex hull pricing problem. The final computational experiments on a revised IEEE 118-bus system indicates the effectiveness of the proposed approach. The trade-off between the cost-saving and computational time improvement is also reported as a reference for further usage. [ABSTRACT FROM AUTHOR]