Search

An electromagnetic map (EM) can provide movable base stations with information to optimize the communication quality of temporary communication systems in disaster areas, such as areas suffering from earthquakes. In this paper, a low-cost and effective communication optimization system model that uses sensing nodes and EMs is proposed. Moreover, two EM reconstruction methods, which serve as the keys to the model, are proposed to reconstruct EMs to provide information for communication optimization according to different demands. One method is KGA-GAN-SBI, which combines the kriging algorithm, generative adversarial network and split bregman iterations, and the other is APCA-KGA-DPA, which combines the affinity propagation clustering algorithm, kriging algorithm and domain mapping algorithm. The former can satisfy the demand of high-accuracy EMs. The latter can reconstruct an EM faster than KGA-GAN-SBI. The simulation results show that both low-cost methods can reconstruct more accurate EMs than several existing algorithms; they can provide an effective way to optimize the communication quality of temporary communication and fill the gap in the study of EM applications. [ABSTRACT FROM AUTHOR]

In connected vehicular networks, it is vital to have vehicular nodes that are capable of sensing surrounding environments and exchanging messages with each other for automating and coordinating purposes. Towards this end, integrated sensing and communication (ISAC), combining both sensing and communication systems to jointly utilize their resources and pursue mutual benefits, emerges as a new cost-effective solution. In ISAC, the hardware and spectrum co-sharing leads to a fundamental tradeoff between sensing and communication performance, which is not well understood except for very simple cases with the same sensing and channel states, and perfect channel state information at the receiver (CSIR). In this paper, a general point-to-point ISAC model is proposed to account for the scenarios where the sensing state is different from but correlated with the channel state, and the CSIR is not necessarily perfect. For the model considered, the optimal tradeoff is characterized by a capacity-distortion function that quantifies the best communication rate for a given sensing distortion constraint requirement. An iterative algorithm is proposed to compute such tradeoff, and a few non-trivial examples are constructed to demonstrate the benefits of ISAC as compared to the separation-based approach. [ABSTRACT FROM AUTHOR]

Combining powerful error-correction codes (ECCs) with multipulse pulse-position modulation (MPPM) has great potential to realize high-throughput and high-reliability transmissions in free-space optical (FSO) communication systems. This paper conducts an insightful investigation on protograph low-density parity-check (PLDPC)-coded MPPM systems over Poisson channels. To be specific, we first put forward a novel type of constellations, referred to as irregular pulse-distribution (IPD) constellations, for MPPM. We also conceive a bit-level rate-adaptive (RA) scheme, which can exploit the structural property of the IPD constellations to significantly improve the convergence performance at the price of transmission-rate loss. Furthermore, with the aid of a modified protograph extrinsic information transfer (PEXIT) algorithm, we construct three enhanced PLDPC codes with code rates $1/2, 2/3$ and $3/4$ that exhibit excellent decoding thresholds over Poisson channels. The proposed PLDPC-coded MPPM systems with the use of the IPD constellations, RA scheme, and enhanced PLDPC codes are superior to the state-of-the-art counterparts. [ABSTRACT FROM AUTHOR]

This paper studies a secure multiuser multiple-input single-output (MISO) communication system aided by an intelligent reflecting surface (IRS), where multiple colluding eavesdroppers (EVEs) coexist. We aim to maximize the sum secrecy rate (SSR) via jointly optimizing the beamforming vectors, the artificial noise (AN) and the phase shifts at the IRS subject to the maximum transmit power constraint and unit modulus constraints. To address the non-convex optimization problem, we first propose an alternating optimization (AO) algorithm based on semidefinite relaxation (SDR) and obtain a high-quality sub-optimal solution. In order to reduce the high computational complexity, a low-complexity alternating optimization (LC-AO) algorithm is developed, in which the beamforming vectors, AN and the IRS phase shifts are optimized alternately by the generalized power iteration (GPI) and the Riemannian manifold conjugate gradient (RMCG) algorithm, respectively. Simulation results show the advantages of deploying the IRS in improving the system secrecy performance. [ABSTRACT FROM AUTHOR]

Aerial base stations (ABSs) are expected to be important supplementary components for the 5G-and-beyond communication systems to achieve global Internet of Everything. To fully exploit the advantages of the ABSs seamless connection, in this paper, we propose a high altitude platform (HAP) and low altitude platforms (LAPs) cooperated network architecture. Specifically, the HAP can extend the network coverage and LAPs can act as relays to improve the transmission performance for hot spots. In the considered network, we investigate the sum rate maximization problem by optimizing the downlink and the uplink transmissions, respectively. In the downlink, we adopt the orthogonal frequency division multiple access technique and take the basic rate requirement into account. In addition, we optimize the height of LAPs and the spectrum allocation between the HAP and LAPs, and between the LAP and users. Then, we decouple the downlink sum rate maximation problem as three subproblems. An alternating optimization framework is designed to deal with these non-convex optimization problems, where the height and spectrum allocation are tackled in turn. In the uplink, we adopt the non-orthogonal multiple access technique, and consider the decoding threshold of the successive interference cancellation technique. Afterward, we optimize the power allocation of each user, and the spectrum allocation between users and the LAP, and between LAPs and the HAP. Finally, simulation results show the effects of spectrum allocation, height optimization and power allocation on network performance, which verify that the proposed scheme can achieve higher sum rate on both downlink and uplink in comparison with the current works. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS)-enhanced wireless communication is one of the critical technologies of the sixth generation mobile communication, which has recently emerged as an innovative solution to the realization of intelligent transportation. It can meet the increasing demand for high-speed railway (HSR) communications services. In this paper, we consider a train-ground TDD wireless mobile communication paradigm to deploy two IRSs on the roadside and the train roof to assist the wireless transmission for the HSR communication system. To achieve the more significant performance gain, in the uplink transmission phase, we propose the practical channel estimation framework of the MIMO system aided by double IRSs to acquire reliable channel state information (CSI) of each channel. To facilitate the processing of the three-dimension tensor, we leverage the trilinearity of the parallel factor decomposition to decompose the received signal into a two-dimensional matrix. The Doppler frequency offset compensating scheme and channel tracking scheme based on Kalman-Filter are proposed to further decrease the pilot overheads. Then, in the downlink phase, a block coordinate descent (BCD) algorithm is proposed to handle the data rate maximization problem of double IRSs communication system with the estimated CSI. We reformulate the original problem and decouple the double IRSs phase optimization problem into two single IRS phase optimization non-convex problems under the unit-modulus constraint. The Majorization-Minimization (MM) algorithm is proposed to approximate the optimal solution of the two optimization subproblems. Simulation results corroborate the effectiveness of the proposed channel estimation and phase shifts optimization scheme. [ABSTRACT FROM AUTHOR]

From the fourth generation (4G) of cellular systems onward, wireless personal devices (WPDs) support multi-input multi-output (MIMO) communication. However, the impact of MIMO communication on the electromagnetic field (EMF) of WPD users has yet to be fully understood and analyzed at the system level. In this paper, we first provide a generic model for assessing the individual exposure dose of multi-antenna WPD users in a multi-user multi-carrier communication system. An optimization framework for minimizing this exposure dose is then developed based on our exposure model. This framework helps us to identify a new criterion, i.e., the ratio between the normalized exposure dose and the channel to noise ratio (CNR), as the main system level criterion for minimizing the individual exposure dose of multi-antenna WPD users. This criterion is further integrated in the design of two novel centralized resource allocation schemes that take advantage of the multiple antennas at the WPD to minimize the per-user exposure dose, when full or limited knowledge of each user channel is available. Our new schemes can significantly reduce the individual exposure dose of WPD users (by approximately 80%) in comparison with the most relevant existing resource allocation schemes. Our results also provide insights into the logarithmic relationship between the per-user exposure dose and the number of receive antennas (or the number of time slots), and how such a parameter can be exploited to further reduce the exposure and/or provide a higher SE while maintaining a low exposure dose. [ABSTRACT FROM AUTHOR]

Inspired by the promising potentialof reconfigurable intelligent surface (RIS)-based transmission, this paper investigates the RIS-aided vehicle-to-everything (V2X) communication system with the social trust, where multiple vehicle-to-infrastructure (V2I) links share the spectrum with vehicle-to-vehicle (V2V) links. Subject to the reliability constraint of V2V links, the sum V2I link capacity is maximized, through jointly optimizing the power allocation, RIS reflection coefficients and spectrum allocation. The formulated mix-integer and non-convex problem is effectively converted into three subproblems, which can be iteratively solved by our proposed three-stage joint resource allocation and RIS optimization (JRARO) algorithm. Simulation results demonstrate the effectiveness of the proposed algorithm, and that the RIS can significantly improve the quality of vehicular communications in terms of the sum V2I capacity. [ABSTRACT FROM AUTHOR]

In this paper, we investigate an intelligent reflecting surface (IRS) aided millimeter wave (mmWave) communication system using hybrid precoding of subarray-connected structure at the base station. To maximize the received signal power of the user, we jointly optimize the active beamforming at the BS and passive beamforming at the IRS, respectively. Exploiting the rank-one property of mmWave channels, we transform the original problem into an approximate optimization problem and give the closed-form solution of the approximated problem. Simulation results show that our proposed scheme can effectively improve the received signal quality of the user with a high energy efficiency. [ABSTRACT FROM AUTHOR]

In Multiple-input multiple-output (MIMO) broadcast channels (BCs), the transmitter simultaneously broadcasts signals to multiple receivers at same frequency band, resulting in that the communication capacity is affected by both interference, channel fading and random noise. Although channel fading can be mitigated by transceivers, the signal-to-noise-ratio (SNR) of the practical communication system is still dynamically changing due to the randomly changing noise. Traditional MIMO transceiver optimization algorithms can not flexibly adapt to the dynamic changes of SNR, resulting in large performance degradation. In this paper, we comprehensively consider signal power and signal space dimensions of the received signal in MIMO BCs, and propose two transceiver optimization algorithms which can dynamically adapt to the variance of SNRs. In the proposed algorithms, SNR is adopted to be an adjustment factor to cope with its variance. When SNR is low, i.e, large noise, the algorithm parameters are automatically adjusted so that the signal power is preserved as much as possible to combat the loss of communication capacity caused by large random noise. Correspondingly, under the condition of high SNR environment, the algorithm parameters are adjusted automatically to effectively compress the inter-user-interference (IUI) and intra-user-inter-stream-interference (ISI) by optimizing signal space dimensions. Simulation results show that in different SNR environments, the proposed algorithms can automatically adjust the focus of optimization, so that the optimization of signal power and signal space dimensions can automatically adapt to different SNRs. Compared with traditional transceiver optimization algorithms, the proposed algorithms can improve the communication capacity within a large dynamic range of SNR. [ABSTRACT FROM AUTHOR]

The rapid development of maritime activities has led to the emergence of more and more computation-intensive applications. In order to meet the huge demand for wireless communications in maritime environment, mobile edge computing (MEC) is considered as an effective solution to provide powerful computing capabilities for maritime terminals of resource scarcity or latency sensitive. A basic technology to implement MEC is virtual machine (VM) multiplexing, through which multi-task parallel computing on a server is realized. In this paper, a two-layer unmanned aerial vehicles (UAVs) maritime communication network with a centralized top-UAV (T-UAV) and a group of distributed bottom-UAVs (B-UAVs) is established and MEC is used on T-UAV. We aim to solve the latency minimization problem for both communication and computation in this maritime UAV swarm mobile edge computing network. We reformulate this problem into a Markov decision process (MDP), since it is a non-convex and multiply constrained but has the characteristics of MDP. Based on this MDP model, we take deep reinforcement learning (DRL) as our tool to propose a deep Q-network (DQN) and a deep deterministic policy gradient (DDPG) algorithms to optimize the trajectory of T-UAV and configuration of virtual machines (VMs). Using these two proposed algorithms, we can minimize the system latency. Simulation results show that the given solutions are valid and effective. [ABSTRACT FROM AUTHOR]

In this paper, we investigate an unmanned aerial vehicle (UAV) communication system, where the trajectories of multi-UAVs are designed for the data collection mission of IoT nodes. We aim at minimizing the mission time with constraints of UAV’s maximum speed and acceleration, the collision avoidance, and communication interference among UAVs. We propose a three-step approach to solve this problem, which is based on the K-means algorithm, and Deep Reinforcement Learning (DRL) with a distributed manner and a centralized manner. The mutual influences like collision avoidance and interference among UAVs are explicitly expressed in our algorithm. Numerical results show the advantage of our proposed approach. [ABSTRACT FROM AUTHOR]

In this paper, an aerial heterogeneous wireless network consists of a high altitude platform (HAP) and low altitude platforms (LAPs) as aerial base stations (ABSs) in a downlink orthogonal division multiple access (OFDMA) transmission is investigated. Two types of spectrum sharing, including spectrum underlay access (SUA) and spectrum overlay access (SOA) are employed to evaluate the inter-tier interference. Distributed problem formulation and solving method are used to reduce the computational complexity, communication overhead and system latency. Subcarrier assignment and power allocation in spectral efficiency (SE), energy efficiency (EE) and transmission power optimization problems are accomplished by the proposed two-layer algorithm. In the proposed algorithm, first, subcarrier assignment based on constraints of the optimization problems is carried out to cover both SUA and SOA with low computational complexity. Second, the proposed algorithm performs power allocation. The simulation results show the relation between spectrum reuse and inter-tier interference, such that system SE, EE and the number of served users are maximized when both spectrum reuse and inter-tier interference management are performed together. [ABSTRACT FROM AUTHOR]

In this paper, we study an unmanned aerial vehicle (UAV)-enabled wireless powered communication network, where a UAV serves multiple energy constrained wireless sensor nodes (WSNs). In such a network, a UAV transmits wireless power to a group of WSNs which exploits the harvested power to transfer their own information towards the UAV in the uplink. For practical scenarios, a nonlinear energy harvesting saturation model is considered at WSNs. We aim to design resource allocation which maximizes the achievable sum rate in the uplink and minimizes the downlink transmit power simultaneously. The design is formulated as a multi-objective optimization problem (MOOP) which optimizes the UAV's 3D position, its transmit power, the time splitting ratio, the uplink transmission time and the beamwidth angle of the UAV. The formulated problem is a non-convex problem which is generally intractable. To address the MOOP, a weighted Tchebycheff method is proposed. The numerical results show a trade-off between the minimum power in the downlink and the maximum rate as well as energy efficiency in the uplink. [ABSTRACT FROM AUTHOR]

Millimeter wave (mmWave) communication enables ultra-high rate data transmission in wireless environments, but its performance depends on blockages between the transmitter and receiver significantly. To overcome the blockage problem, we consider two approaches: multi-connectivity and network densification. The multi-connectivity opens up a new paradigm for user centric communication, where each user autonomously chooses multiple base stations (BSs) to attain high quality services. The network densification allows network operators to deploy many BSs in a limited area, thereby providing qualified communication services to users. In this paper, we study user equipment (UE) association control in user centric mmWave communication environments. When a UE arrives, the network provides the UE with information on the resource status of adjacent BSs, and the UE generates a set of candidate BSs. For access control, we formulate two optimization problems that aim to minimize peak load and sum load, respectively. They are non-convex and combinatorial, so their computational complexity grows exponentially with the problem size. As a solution, we develop an access pricing and peak load limit control scheme. Through numerical experiments, we investigate its impact on the performance of mmWave communication systems. The results show that our proposed scheme successfully provides high quality services to users and allocates the network load fairly over the network. [ABSTRACT FROM AUTHOR]

In this paper, we consider the secure transmission problem in an unmanned aerial vehicle (UAV) and intelligent reflecting surface (IRS) assisted mmWave networks in the presence of an eavesdropper. The UAV base station (UAV-BS) and IRS are deployed to overcome the blockages. Artificial noise (AN) is exploited against the eavesdropper. Aiming to maximize the secrecy rate, we jointly design the positions and beamforming of UAV-BS and IRS, where the positions here represent the deployed position of the UAV-BS and the activation position of the IRS. Meanwhile, the maximum transmits power, minimum height constraint for UAV-BS, and the legitimate receiver minimum rate constraint are required. To obtain the optimal UAV-BS position, the elevation angle-dependent probabilistic LoS air-to-ground channel is exploited in this network. To tackle the formulated non-convex problem, we divide it into two subproblems: (1) design UAV-BS and IRS positions; (2) design UAV-BS and IRS beamforming. Moreover, to reduce the complexity, we propose an ideal beamforming model to find the near-optimal positions of UAV-BS and IRS. Then, semidefinite relaxation (SDR) is utilized to cope with the highly coupled and high-dimensional variable vectors. Finally, we obtain a sub-optimal solution by an efficient and low-complexity alternating optimization algorithm. Numerical results demonstrate the improvement of secrecy rate by jointly designing the positions as well as the significant performance gains achieved by our proposed schemes over benchmark schemes. [ABSTRACT FROM AUTHOR]

Phase-only beamforming (POB) plays an important role in modern radar and communication systems. The NP-hard nature of POB makes it difficult to be solved for large-scale antenna arrays. This paper studies two fast and simple GP algorithms for the problem of POB. First we give a new interpretation of the GP method under the framework of sequential quadratic programming (SQP). Then we prove that the GP operation gives a strict global minimizer of the subproblem of SQP. Moreover, the larger the step size in GP operation, the smaller the minimum value of the subproblem. Based on this observation we design two variable step size GP (VSGP) algorithms that improve the convergence speed of the GP method significantly. Furthermore, the VSGP algorithms have a simple structure, making them easy to be implemented in chips. Finally, we derive a necessary and sufficient condition for the Karush-Kuhn-Tucker (KKT) points of the POB problem. We also prove that, for any initialization, all limit points of the iterates generated by the VSGP algorithms converge to the KKT points. Simulation results show that the proposed algorithms outperform the state-of-the-art algorithms in terms of convergence speed and computational cost. [ABSTRACT FROM AUTHOR]

Both the jammer and the eavesdropper pose severe threat to wireless communications due to the broadcast nature of wireless channels. In this paper, an intelligent reflecting surface (IRS) assisted secure communication system is considered, where a base station (BS) wishes to reliably convey information to a user, in the presence of both a jammer and an eavesdropper whose transmit informations are not completely known. Specifically, with the imperfect third-party node's channel state information (CSI) and no knowledge of the jammer's transmit beamforming, we aim to maximize the system achievable rate by jointly designing the BS's transmit beamforming and the IRS's reflect beamforming, while limiting the information leakage to the potential eavesdropper. Due to the non-convexity and intractability of the original problem induced by the incompleted information, we utilize the auxiliary variables, Cauchy-Schwarz inequality, and General Sign-Definiteness transformation to convert the original optimization problem into a tractable convex optimization problem, and then obtain the high-quality optimal solution by using the successive convex approximation and penalty convex concave procedure. Numerical simulations demonstrate the superiority of our proposed optimization algorithm compared with existing approaches, and also reveal the impact of key parameters on the achievable system performance. [ABSTRACT FROM AUTHOR]

To increase the feasibility of wireless powered communication networks (WPCNs), the synergy of efficient multiple access protocols and diverse types of resources, e.g., multiple antennas, memories, and energy storage devices is of paramount importance. To this end, in this paper, we introduce the use of buffered sources in WPCNs with uplink non-orthogonal multiple access, in which a multi-antenna hybrid access point can both transmit energy and receive information. The proposed scheme aims at maximizing the long-term utility function, which is determined by the achieved average data rate and fairness among sources. The formulated long-term time-average optimization problem is converted into instantaneous ones by exploiting the Lyapunov optimization framework. The derived analytical solutions reveal the impact of data buffers’ length on the decoding order of sources’ messages. Finally, it is shown that the proposed scheme achieves superior long-term utility compared to the considered baseline schemes with non-buffered sources and buffered sources with orthogonal multiple access. Additionally, it is demonstrated that our proposed scheme can ensure fairness without reducing the average data rate. [ABSTRACT FROM AUTHOR]

This paper considers optimal joint time, frequency, and power allocation for energy-efficient device-to-device (D2D) communications in an overlay cellular network, where multiple D2D transmitters communicate with their corresponding D2D receivers while utilizing the energy harvested from a cellular base station (BS). Due to channel estimation error and feedback delays, the channel state information (CSI) available at the transmitters is usually imperfect, which can significantly deteriorate the energy efficiency (EE) of the considered system. To mitigate the impact of imperfect CSI, we formulate a non-convex robust optimization problem for the maximization of the EE (in bits/Joule) of the system while ensuring quality of service (QoS) requirements on the minimum data rata and the minimum amount of harvested energy for cellular and D2D users, respectively. We reveal that the optimal energy-efficient D2D transmission should exhaust all the harvested energy of each D2D transmitter. Exploiting this fact, we propose an efficient iterative algorithm for obtaining the optimal solution. To strike a balance between performance and computational complexity, we further propose a low-complexity suboptimal algorithm. Simulation results show that compared with several baseline schemes, both the proposed optimal and suboptimal algorithms can significantly improve the EE of wireless-powered D2D communications under imperfect CSI. Moreover, the proposed suboptimal algorithm is close-to-optimal when the number of cellular users are small or the channel estimation error is large. [ABSTRACT FROM AUTHOR]