Search

Abstract: This work is devoted to the preparation of ultrafine material based on Al–Cu–Fe quasicrystalline phase by powder metallurgy using mechanical alloying and Spark Plasma Sintering. The dependence of microstructure and phase composition of powders on the conditions of mechanical alloying was described. It was found that the Al60Cu30Fe10 quasicrystalline phase forms directly already after 2 h of milling under optimized conditions. The stability of this quasicrystalline phase was studied at various temperatures of Spark Plasma Sintering compaction process. [Copyright &y& Elsevier]

Abstract: Alloys formed by Fe–Al intermediary phases have lower density than common metallic high-temperature alloys and good high-temperature oxidation resistance. Previously it was proved that silicon additions to these alloys enable to produce them efficiently by reactive sintering and improves the wear resistance. In this work, the oxidation resistance of the novel Fe–Al–Si alloys containing 10–30 wt. % of aluminium and 5–30 wt. % of silicon produced by the reactive sintering technology was tested. Cyclic and isothermal oxidation tests were carried out at 800 °C in air. Tested alloys exhibit excellent oxidation resistance, which increases with silicon content up to 20 wt. %. The reasons are discussed in terms of the phase composition of the oxide layer and the changes in chemical composition under the oxide layer during oxidation. [Copyright &y& Elsevier]