Search

This study aimed to explore the effect of induced electric field (IEF) treatment on acid hydrolysis of corn starch by altering the connection modes of sample coils of a 4-reactor IEF system. Results suggested that IEF treatment could enhance the hydrolysis of corn starch and series connection (1. RRRR, η = 16 E Si 2 P in 4 Z Si + Z load ) exhibited higher energy efficiency than parallel (9. (RRRR), η = 4 E Si 2 P in Z Si + 4 Z load ), thus contributing to more extensive hydrolysis. Although no new functional group was formed, the starch granules were partially cracked into pieces and the crystallinity was slightly increased after IEF-assisted hydrolysis. Differential scanning calorimetry results indicated that IEF-assisted hydrolysis increased the gelatinization temperatures but decreased the enthalpy of starch, with a greatest variation was observed by series connection. Rapid visco-analysis showed that IEF-assisted hydrolysis greatly decreased the pasting viscosity of corn starch and also series connection showed the strongest reduction. The obtained results could provide a theoretical guide for the applications of IEF technology in biomaterial processing. [Display omitted] • Induced electric field (IEF) could enhance the acid hydrolysis of corn starch. • IEF-assisted hydrolysis highly depends on the energy efficiency of IEF system. • Series connection of IEF reactors showed the highest energy efficiency. • IEF-assisted hydrolysis largely decreased the pasting viscosity of corn starch. • IEF-assisted hydrolysis increased gelatinization temperatures but decreased enthalpy. [ABSTRACT FROM AUTHOR]

To better understand the correlation between structure and properties in thermoplastic starch biopolymer blend films, the effects of amylose content, chain length distribution of amylopectin and molecular orientation of thermoplastic sweet potato starch (TSPS) and thermoplastic pea starch (TPES) on microstructure and functional properties of thermoplastic starch biopolymer blend films were studied. After thermoplastic extrusion, the amylose contents of TSPS and TPES decreased by 16.10 % and 13.13 %, respectively. The proportion of the chains with the degree of polymerization between 9 and 24 of amylopectin in TSPS and TPES increased from 67.61 % to 69.50 %, and from 69.51 % to 71.06 %, respectively. As a result, the degree of crystallinity and molecular orientation of TSPS and TPES films increased as compared to sweet potato starch and pea starch films. The thermoplastic starch biopolymer blend films possessed a more homogeneous and compacter network. The tensile strength and water resistance of thermoplastic starch biopolymer blend films increased significantly, whereas thickness and elongation at break of thermoplastic starch biopolymer blend films decreased significantly. • The structure-function relationship of thermoplastic starch films was analyzed. • Thermoplastic starch films showed higher molecular orientation and crystallinity. • The chains with DP between 9 and 24 and molecular orientation were the dominant factors. • Thermoplastic starch films showed a better tensile strength and water resistance. [ABSTRACT FROM AUTHOR]

To illustrate the correlations between molecular structures and the film-forming properties of thermoplastic starch from various botanical sources, starches from cereal, tuber and legume were modified by thermoplastic extrusion and the corresponding thermoplastic starch films were prepared including thermoplastic corn starch (TCS), thermoplastic rice starch (TRS), thermoplastic sweet potato starch (TSPS), thermoplastic cassava starch (TCAS) and thermoplastic pea starch (TPES) films. TPES film displayed a higher tensile strength (6.28 MPa) and stronger water resistance, such as lower water solubility (15.70 %), water absorption (42.35 %), and water vapor permeability (0.285 g·mm· h −1· m −2·kPa−1) due to higher contents of amylose and B 1 chains. TCAS showed a smoother and more amorphous film due to higher amylopectin content, resulting higher elongation at break and larger opacity. TCS film was the most transparent due to a compacter network and more ordered crystallinity structure, which was suit for the packaging of fresh vegetables and aquatic products, whereas TCAS film was the opaquest, which protected package foods from light such as meat products, etc. The outcome would provide an innovative theory to regulate accurately the functional properties of thermoplastic starch films for different food needs. • The structure-function relationship of thermoplastic starch films was studied. • TPES film with higher contents of amylose and B1 chains displayed a stiffer structure. • TPES film displayed a stronger water resistance with higher amylose content and B1 chains. • TCAS film with higher amylopectin showed a higher elongation at break and opacity. • TCS film was the most transparent due to more ordered crystallinity structure. [ABSTRACT FROM AUTHOR]

To explore an effective and economic method to prepare higher contents of resistant starch (RS), different enzyme treatments including single pullulanase (PUL), commercial α-amylase (AA) or/and β-amylase (BA) with PUL, and malt endogenous amylase (MA) with PUL were used and the structural, physicochemical properties and digestibility of all modified starches (MS) were compared. All the enzyme-treated starches displayed a mixture of B and V-type diffraction patterns. The MA/PUL-MS showed higher V-type diffraction peak intensity as compared to other modified starches. Compared to the combination of commercial enzyme treatment, the combination of malt enzyme treatment led to higher apparent amylose contents (45.56%), RS content (53.93%) and thermal stability (302 °C), whereas it possessed lower solubility indices and predicted glycaemic index. The apparent viscosity and shear resistance of MA/PUL-MS were lower than that of AA/PUL-MS, whereas that of MA/PUL-MS was higher than that of BA/PUL-MS and BA/AA/PUL-MS. These findings would provide a theoretical and applicative basis to produce foods with lower GI in industrial production. • The effects of commercial or malt enzymes on maize starch properties were compared. • The malt enzyme treatment formed more amylose–lipid complexes. • Malt enzyme-modified starch had the highest RS content and lowest GI value. • Low-cost malt amylase can replace expensive commercial enzymes to prepare RS. [ABSTRACT FROM AUTHOR]

Herein, a multistage induced electric field (IEF) combined with a continuous-flow reactor was utilized to assist the acid hydrolysis of corn, potato, and waxy corn starch for avoiding plate corrosion and heavy metal leakage. It was found that adding IEF stages was beneficial to improve the hydrolysis efficiency. Treating potato, corn, and waxy corn starch via continuous-flow IEF increased the reducing sugar contents up to 78.76 %, 57.86 %, and 66.18 %, respectively. The electrical conductivity of starch grew with the reaction stages, while starch yield demonstrated the opposite trend. Treated starch had higher solubility and gelatinization peak temperature than native starch, with the gelatinization enthalpy showing fluctuations. Meanwhile, the swelling power decreased as the number of IEF stages was increased. Observations of Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy indicated that the treated starch became more ordered, and crystalline regions were destroyed to various degrees with pores forming on particle surfaces. These variations could be attributed to acid hydrolysis and IEF. [ABSTRACT FROM AUTHOR]