Search

In this study, a low-cost biomass charcoal (BC)-based nickel catalyst (Ni/BC) was introduced into the MgH 2 system by ball-milling. The study demonstrated that the Ni/BC catalyst significantly improved the hydrogen desorption and absorption kinetics of MgH 2. The MgH 2 + 10 wt% Ni/BC-3 composite starts to release hydrogen at 187.8 °C, which is 162.2 °C lower than the initial dehydrogenation temperature of pure MgH 2. Besides, 6.04 wt% dehydrogenation can be achieved within 3.5 min at 300 °C. After the dehydrogenation is completed, MgH 2 + 10 wt% Ni/BC-3 can start to absorb hydrogen even at 30 °C, which achieved the absorption of 5 wt% H 2 in 60 min under the condition of 3 MPa hydrogen pressure and 125 °C. The apparent activation energies of dehydrogenation and hydrogen absorption of MgH 2 + 10 wt% Ni/BC-3 composites were 82.49 kJ/mol and 23.87 kJ/mol lower than those of pure MgH 2 , respectively, which indicated that the carbon layer wrapped around MgH 2 effectively improved the cycle stability of hydrogen storage materials. Moreover, MgH 2 + 10 wt% Ni/BC-3 can still maintain 99% hydrogen storage capacity after 20 cycles. XRD, EDS, SEM and TEM revealed that the Ni/BC catalyst evenly distributed around MgH 2 formed Mg 2 Ni/Mg 2 NiH 4 in situ, which act as a "hydrogen pump" to boost the diffusion of hydrogen along with the Mg/MgH 2 interface. Meanwhile, the carbon layer with fantastic conductivity enormously accelerated the electron transfer. Consequently, there is no denying that the synergistic effect extremely facilitated the hydrogen absorption and desorption kinetic performance of MgH 2. The carbon layer is evenly wrapped around MgH 2 /Mg, and Ni nano catalyst is evenly distributed on the surface. During dehydrogenation and reabsorption, Ni nanoparticles generate Mg 2 Ni and Mg 2 NiH 4 in situ. The use of uniformly distributed Mg 2 Ni/Mg 2 NiH 4 as a "hydrogen pump" promotes the diffusion of hydrogen along the Mg/MgH 2 interface, and the carbon layer with good conductivity accelerates the electron transfer. It is believed that the synergistic effect of the two improves the hydrogen absorption and desorption rate of MgH 2. [Display omitted] • Biomass charcoal was introduced into the MgH 2 system for the first time. • Composites started to release H 2 at 187.8 °C and could start to absorb H 2 at 30 °C. • The activation energy of de/hydrogenation was significantly reduced for composites. • Biomass charcoal contributes to the cyclic stability of composites. [ABSTRACT FROM AUTHOR]