Search

Changes are emerging that will significantly alter structure and operation of this century's distribution networks, and photovoltaic (PV) systems will play greater role in energy sector, with implications for power system reliability. Considering uncertainties in solar irradiance and electrical loads and incorporating them into the optimization problem within an appropriate methodology is becoming increasingly important in reshaping distribution networks. In this paper, uncertainty scenarios are handled with Monte Carlo Simulation (MCS) under genetic algorithm (GA) and differential evolution- (DE-) based optimization, and probability distribution functions (pdf) of bus voltages and line current are obtained to be used in chance-constrained stochastic programming. This present study focuses on investigating impact of uncertainties in PV system operating under different irradiance scenarios on power loss with probabilistic constraints in distribution networks instead of precise deterministic limits to contribute more efficient and reliable use of energy. By combining meta-heuristic optimization and MCS technique under one framework, this paper contributes to knowledge base of how to allocate PV plants within distribution networks under chance-constrained strategy. In order to show the effectiveness of the proposed methodology, obtained optimization results are tested using MCS under set of uncertainty conditions and network constraints are evaluated for limit violation probabilities. The effectiveness of this method is investigated based on comparative results of two different optimization methods through probabilistic analysis and simulation. [ABSTRACT FROM AUTHOR]

Power quality is the main problem with the power system network. Poor electricity quality may cause disruptions and financial challenges for consumers. Additionally, it could cause electronic gadgets to overheat, be damaged, or operate inadvertently. Transformers and other components of the power distribution system may also overheat and experience core saturation. This study investigates potential problems with the quality of the electricity in a photovoltaic linked power system. This paper suggests a new optimization method for day-ahead trading and control in DC microgrid power management (MG). The goal of the multiobjective optimization dispatch (MOOD) problem is to lower overall operational costs as well as the costs associated with power loss in efficient conservation systems and exhaust emission quantities such as nitrogen oxides, sulphur dioxide, and carbon dioxide. Using the weighted sum approach, the multiobjective optimization problem is reduced to a single optimization problem. The analytical hierarchy process (AHP) method is then used to calculate the weight coefficients while accounting for each objective function's preferences. Power balancing, high levels of renewable energy penetration, the most effective scheduling of battery charging and discharging, control of load curtailment, and the technical limitations of the system are all taken into account when evaluating the system's performance in both grid-connected and standalone operation modes. The ant lion optimizer (ALO) technique is taken into account to tackle MOOD, comparing the effectiveness of the proposed method to other well-known heuristic optimization techniques. The simulation's results demonstrate how effectively the proposed strategy can address the coordinated control and optimization dispatch difficulties. They also found that operating the MG system economically in grid-connected mode can save overall costs by roughly 4.70% compared to doing it in independent mode. [ABSTRACT FROM AUTHOR]

The photovoltaic(PV) system's efficiency can be improved with the aid of effective solar PV cell modeling. However, flawed solar cell parameters affect PV cell modeling incorrectly. The manufacturers are usually not providing all the necessary data for the exact modeling of PV cells. It is therefore necessary to efficiently predict the parameters of the PV cell. The literature discusses various optimization algorithms, but the suboptimal outcomes are obtained by most of the algorithms due to their convergence toward local minima. This paper introduces a new stochastic optimization algorithm for the estimation of solar PV cell parameters. Therefore, for the evaluation of the solar cell, a new novel chaotic algorithm is introduced in this paper called the chaotic tunicate swarm algorithm (CTSA). The proposed algorithm has a new function called an outstanding mathematical model of adaptive weights to stimulate negative and positive inputs from the spreading wave in order to find the best way to connect food with an excellent exploitation tendency and exploratory ability. For the double‐diode model, the computation time of the chaotic variants (CTSA1‐1.1885, CTSA2‐1.2502, CTSA3‐1.2962, CTSA4‐1.1204, and CTSA5‐1.2214) is better than the rest of the compared algorithms (particle swarm optimization [PSO]‐17.4532, tunicate swarm algorithm (TSA)‐2.5278, Harris hawks optimization [HHO]‐10.8942, ant lion optimizer [ALO]‐15.0214, and atom search optimization [ASO]‐9.5214). For the triple‐diode model, the computation time of the chaotic variants (CTSA1‐1.2658, CTSA2‐1.3520, CTSA3‐1.3056, CTSA4‐1.2290, and CTSA5‐1.3859) is better than the rest of the compared algorithms (PSO‐18.5421, TSA‐3.2568, HHO‐9.8754, ALO‐13.5841, and ASO‐11.8412). The superiority of proposed algorithm is established using ranking test, statistical error analysis, and sensitivity temperature variation. [ABSTRACT FROM AUTHOR]

This paper considers the problem of tracking the global maximum power point (GMPP) in partially shaded conditions (PSCs) as a multiobjective optimization problem and solves it using a novel multiobjective optimization algorithm on the basis of Bayesian optimization formulation. Bayesian optimization is a metamodel-based global optimization method that is able to balance exploration and exploitation. The Pareto solutions are obtained by using a multiobjective Bayesian optimization algorithm. Also, a new acquisition function is proposed to improve the diversity and convergence of the Pareto solutions. Two objective functions are introduced to remove the large tracking errors and oscillations of the operating point around the GMPP. The suggested method is implemented online for GMPP tracking so that the suggested method monitors any change in environmental conditions and generates the optimal duty cycle for the DC-DC converter for the GMPP tracking (GMPPT) by the PV array. Several multipeak PSC scenarios are implemented and simulated to show efficiency of the suggested approach. The MATLAB/SIMULINK is employed to implement a photovoltaic (PV) system comprising a PV array, a boost converter, and the proposed multiobjective Bayesian optimization algorithm (MOBOA). The simulation results show a very satisfactory performance of the MOBOA in terms of transient state and steady-state oscillations and tracking speed. [ABSTRACT FROM AUTHOR]

This paper discusses and analyses the work done in developing a Nature‐inspired optimization algorithm in a solar PV system for tracking the global maximum power point (GMPP) in partial shaded condition (PSC). Partial shading is a situation where PV panels connected in series do not receive the same solar radiation, thus exhibiting different I‐V characteristics for the individual panel. Under PSC, solar PV system output exhibits multiple local maximum power point (MPP) and a unique global MPP on the Power‐Voltage curve. Conventional maximum power point tracking (MPPT) techniques such as Perturb and Observe (P&O), incremental conductance (IC), and Hill Climbing (HC) method can only track MPP under uniform insolation conditions. It may fail to track GMPP in case of PSC and get trapped in local MPP, thereby causing loss of power that could have been tapped if the operation would have been at GMPP. To overcome the problem posed by PSC, researchers are applying the nature‐inspired optimization algorithm for tracking GMPP under partial shading conditions with fairly good results. Nature‐inspired optimization algorithm offers the advantage of solving multivariable nonlinear objective functions with constraints by exploiting the search space and can converge quickly to GMPP. Some of the most recent and famous nature‐inspired algorithms have been discussed and compared here. Simulation and hardware results of some of them are also taken in order to compare them effectively. Simulation results show that the Most Valuable Player Algorithm (MVPA) takes the least time to track the MPP in all the cases, and the MPP tracked is also comparable to the maximum while PSO with differentially perturbed velocity (PSO_DV) takes the maximum time to track the MPP in all cases. [ABSTRACT FROM AUTHOR]

Summary: Enhancing distribution system operation accomplished with the integration of renewable energy resources (RERs) has several technical, economical, and environmental dimensions. In this regard, this paper presents an optimal integration procedure of Distributed Generation (DG) based on Photovoltaic panel (PV) and Distribution Static Compensator (DSTATCOM) in Electrical Distribution System (EDS). The proposed procedure is formulated as a multi‐objective function (MOF). The considered objectives that reflect the technical, economic, and environmental issues, are Active Power Loss Level (APLL), Short Circuit Level (SCL), Voltage Deviation Level (VDL), Net Saving Level (NSL), and Environmental Pollution Reduction Level (EPRL). The proposed procedure investigates several hybrid optimization methods that combine the firefly algorithm (FA) with various acceleration coefficients PSO algorithms to improve the overall solution quality of the hybrid algorithms compared with the individual algorithms. To prove the capability of the proposed procedure, four different cases are tested on IEEE 33‐bus and 69‐bus EDSs. Added to that, the proposed algorithms are extended to practical Algerian EDS in Adrar City 205‐bus. Results obtained by the hybrid FA‐SCAC‐PSO algorithm showed that the simultaneous allocation of multiple DG and DSTATCOM in all standard and practical test systems significantly reduces the loss and enhances the voltage profile. An energy‐efficient analysis to proceed for different cases studied based on the best hybrid FA‐SCAC‐PSO algorithm to reach the best value of MOF compared to other algorithms, moreover the capability to achieve the optimal allocation of DG and DSTATCOM by maintaining the voltages profile within the permissible limit, whatever the variation of load. Significant technical economic and environmental achievements are found for different case studies especially in the existence of DGs and DSTATCOM devices. [ABSTRACT FROM AUTHOR]

Summary Partial shading conditions generate multiple peaks in the P‐V curve of photovoltaic (PV) arrays. Smart MPPT optimization techniques should be used to capture the global peak (GP) and avoid being trapped in one of the local peaks (LPs). The tracking of the GP should be fast and reliable to enhance the stability and increase the generated efficiency of the PV systems. Bat algorithm (BA) is one of the fastest swarm optimization techniques. The BA control parameters (BA‐CPs) have substantial effects on their performance. This paper introduced a nested BA strategy called BA‐BA strategy to determine the optimal values of control parameters of BA for the lowest convergence time and failure convergence rate to be used in the online MPPT of PV systems. The inner BA loop used the BA as an MPPT of the PV system, meanwhile, the outer BA loop used the inner BA loop as a fitness function to determine the optimal BA‐CPs for minimum convergence time and failure rate. Ten benchmark BA strategies, particle swarm optimization (PSO), and cuckoo search (CS) algorithm have been used to compare their results with the results obtained from the BA‐BA strategy. The results of the BA‐BA strategy reduced the convergence time of 250% of the time associated with the best benchmark BA strategy, 518%, and 395% as compared to the PSO, and CS algorithm, respectively. The simulation and experimental results obtained from the BA‐BA strategy showed its superior for determining the optimal control parameters for BA in MPPT of PV systems or any other applications. [ABSTRACT FROM AUTHOR]