Search

Within the context of fewest-switch surface hopping (FSSH) dynamics, one often wishes to remove the angular component of the derivative coupling between states J and K . In a previous set of papers, Shu et al. [J. Phys. Chem. Lett. 11, 1135–1140 (2020)] posited one approach for such a removal based on direct projection, while we isolated a second approach by constructing and differentiating a rotationally invariant basis. Unfortunately, neither approach was able to demonstrate a one-electron operator O ̂ whose matrix element J O ̂ K was the angular component of the derivative coupling. Here, we show that a one-electron operator can, in fact, be constructed efficiently in a semi-local fashion. The present results yield physical insight into designing new surface hopping algorithms and are of immediate use for FSSH calculations. [ABSTRACT FROM AUTHOR]

In this paper we present the Markovian Multiagent Monte-Carlo Second Order Self-Consistent Field Algorithm (M3-SOSCF). This algorithm provides a highly reliable methodology for converging SCF calculations in single-reference methods using a modified differential evolution approach. Additionally, M3 is embarrassingly parallel and modular in regards to Newton–Raphson subroutines. We show that M3 is able to surpass contemporary SOSCFs in reliability, which is illustrated by a benchmark employing poor initial guesses and a second benchmark with SCF calculations which face difficulties using standard SCF algorithms. Furthermore, we analyse inherent properties of M3 and show that in addition to its robustness and efficiency, it is more user-friendly than current SOSCFs. [ABSTRACT FROM AUTHOR]

We obtain the phase diagram of the hard core lattice gas with third nearest neighbor exclusion on the triangular lattice using Monte Carlo simulations that are based on a rejection-free flat histogram algorithm. In a recent paper [Darjani et al., J. Chem. Phys. 151, 104702 (2019)], it was claimed that the lattice gas with third nearest neighbor exclusion undergoes two phase transitions with increasing density with the phase at intermediate densities exhibiting hexatic order with continuously varying exponents. Although a hexatic phase is expected when the exclusion range is large, it has not been seen earlier in hard core lattice gases with short range exclusion. In this paper, by numerically determining the entropies for all densities, we show that there is only a single phase transition in the system between a low-density fluid phase and a high density ordered sublattice phase and that a hexatic phase is absent. The transition is shown to be first order in nature, and the critical parameters are determined accurately. [ABSTRACT FROM AUTHOR]

Simulating the unitary dynamics of a quantum system is a fundamental problem of quantum mechanics, in which quantum computers are believed to have significant advantage over their classical counterparts. One prominent such instance is the simulation of electronic dynamics, which plays an essential role in chemical reactions, non-equilibrium dynamics, and material design. These systems are time-dependent, which requires that the corresponding simulation algorithm can be successfully concatenated with itself over different time intervals to reproduce the overall coherent quantum dynamics of the system. In this paper, we quantify such simulation algorithms by the property of being fully-coherent: the algorithm succeeds with arbitrarily high success probability 1 − δ while only requiring a single copy of the initial state. We subsequently develop fully-coherent simulation algorithms based on quantum signal processing (QSP), including a novel algorithm that circumvents the use of amplitude amplification while also achieving a query complexity additive in time t, ln(1/δ), and ln(1/ϵ) for error tolerance ϵ: Θ ‖ H ‖ | t | + ln (1 / ϵ) + ln (1 / δ) . Furthermore, we numerically analyze these algorithms by applying them to the simulation of the spin dynamics of the Heisenberg model and the correlated electronic dynamics of an H2 molecule. Since any electronic Hamiltonian can be mapped to a spin Hamiltonian, our algorithm can efficiently simulate time-dependent ab initio electronic dynamics in the circuit model of quantum computation. Accordingly, it is also our hope that the present work serves as a bridge between QSP-based quantum algorithms and chemical dynamics, stimulating a cross-fertilization between these exciting fields. [ABSTRACT FROM AUTHOR]

In a recent paper, we proposed the adaptive shift method for correcting undersampling bias of the initiator-full configuration interaction (FCI) quantum Monte Carlo. The method allows faster convergence with the number of walkers to the FCI limit than the normal initiator method, particularly for large systems. However, in its application to some systems, mostly strongly correlated molecules, the method is prone to overshooting the FCI energy at intermediate walker numbers, with convergence to the FCI limit from below. In this paper, we present a solution to the overshooting problem in such systems, as well as further accelerating convergence to the FCI energy. This is achieved by offsetting the reference energy to a value typically below the Hartree–Fock energy but above the exact energy. This offsetting procedure does not change the exactness property of the algorithm, namely, convergence to the exact FCI solution in the large-walker limit, but at its optimal value, it greatly accelerates convergence. There is no overhead cost associated with this offsetting procedure and is therefore a pure and substantial computational gain. We illustrate the behavior of this offset adaptive shift method by applying it to the N2 molecule, the ozone molecule at three different geometries (an equilibrium open minimum, a hypothetical ring minimum, and a transition state) in three basis sets (cc-pVXZ, X = D, T, Q), and the chromium dimer in the cc-pVDZ basis set, correlating 28 electrons in 76 orbitals. We show that in most cases, the offset adaptive shift method converges much faster than both the normal initiator method and the original adaptive shift method. [ABSTRACT FROM AUTHOR]

We report the development of a new Laplace MP2 (second-order Møller–Plesset) implementation using a range separated Coulomb potential, partitioned into short- and long-range parts. The implementation heavily relies on the use of sparse matrix algebra, density fitting techniques for the short-range Coulomb interactions, while a Fourier transformation in spherical coordinates is used for the long-range part of the potential. Localized molecular orbitals are employed for the occupied space, whereas orbital specific virtual orbitals associated with localized molecular orbitals are obtained from the exchange matrix associated with specific localized occupied orbitals. The range separated potential is crucial to achieve efficient treatment of the direct term in the MP2, while extensive screening is employed to reduce the expense of the exchange contribution in MP2. The focus of this paper is on controllable accuracy and linear scaling of the data entering the algorithm. [ABSTRACT FROM AUTHOR]

In a recent paper, Lucco Castello et al. (arXiv:2107.03537) provided an accurate parameterization of classical one-component plasma bridge functions that was embedded in a novel dielectric scheme for strongly coupled electron liquids. Here, this approach is rigorously formulated, its set of equations is formally derived, and its numerical algorithm is scrutinized. A systematic comparison with available and new path integral Monte Carlo simulations reveals a rather unprecedented agreement especially in terms of the interaction energy and the long wavelength limit of the static local field correction. [ABSTRACT FROM AUTHOR]

Expanding the set of stable, accurate, and scalable methods for simulating molecular quantum dynamics is important for accelerating the computational exploration of molecular processes. In this paper, we adapt the signed particles Monte Carlo algorithm for solving the transient Wigner equation to scenarios of chemical interest. This approach was used in the past to study electronic processes in semi-conductors, but to the best of our knowledge, it had never been applied to molecular modeling. We present the algorithm and demonstrate its excellent performance on harmonic and double well potentials for electronic and nuclear systems. We explore the stability of the algorithm, discuss the choice of hyper-parameters, and cautiously speculate that it may be used in quantum molecular dynamics simulations. [ABSTRACT FROM AUTHOR]

Nuclear long-lived spin states represent spin density operator configurations that are exceptionally well protected against spin relaxation phenomena. Their long-lived character is exploited in a variety of Nuclear Magnetic Resonance (NMR) techniques. Despite the growing importance of long-lived spin states in modern NMR, strategies for their identification have changed little over the last decade. The standard approach heavily relies on a chain of group theoretical arguments. In this paper, we present a more streamlined method for the calculation of such configurations. Instead of focusing on the symmetry properties of the relaxation superoperator, we focus on its corresponding relaxation algebra. This enables us to analyze long-lived spin states with Lie algebraic methods rather than group theoretical arguments. We show that the centralizer of the relaxation algebra forms a basis for the set of long-lived spin states. The characterization of the centralizer, on the other hand, does not rely on any special symmetry arguments, and its calculation is straightforward. We outline a basic algorithm and illustrate advantages by considering long-lived spin states for some spin-1/2 pairs and rapidly rotating methyl groups. [ABSTRACT FROM AUTHOR]

The standard fewest-switches surface hopping (FSSH) approach fails to model nonadiabatic dynamics when the electronic Hamiltonian is complex-valued and there are multiple nuclear dimensions; FSSH does not include geometric magnetic effects and does not have access to a gauge independent direction for momentum rescaling. In this paper, for the case of a Hamiltonian with two electronic states, we propose an extension of Tully's FSSH algorithm, which includes geometric magnetic forces and, through diabatization, establishes a well-defined rescaling direction. When combined with a decoherence correction, our new algorithm shows satisfying results for a model set of two-dimensional single avoided crossings. [ABSTRACT FROM AUTHOR]

The fruitful interplay of high-resolution spectroscopy and quantum chemistry has a long history, especially in the field of small, semi-rigid molecules. However, in recent years, the targets of spectroscopic studies are shifting toward flexible molecules, characterized by a large number of closely spaced energy minima, all contributing to the overall spectrum. Here, artificial intelligence comes into play since it is at the basis of powerful unsupervised techniques for the exploration of soft degrees of freedom. Integration of such algorithms with a two-stage QM/QM′ (Quantum Mechanical) exploration/refinement strategy driven by a user-friendly graphical interface is the topic of the present paper. We will address in particular: (i) the performances of different semi-empirical methods for the exploration step and (ii) the comparison between stochastic and meta-heuristic algorithms in achieving a cheap yet complete exploration of the conformational space for medium sized chromophores. As test cases, we choose three amino acids of increasing complexity, whose full conformer enumeration has been reached only very recently. Next, we show that systems in condensed phases can be treated at the same level and with the same efficiency when employing a polarizable continuum description of the solvent. Finally, the challenging issue represented by the vibrational circular dichroism spectra of some rhodium complexes with flexible ligands has been addressed, showing that our fully unsupervised approach leads to remarkable agreement with the experiment. [ABSTRACT FROM AUTHOR]

Molecular dynamics simulations require barostats to be performed at a constant pressure. The usual recipe is to employ the Berendsen barostat first, which displays a first-order volume relaxation efficient in equilibration but results in incorrect volume fluctuations, followed by a second-order or a Monte Carlo barostat for production runs. In this paper, we introduce stochastic cell rescaling, a first-order barostat that samples the correct volume fluctuations by including a suitable noise term. The algorithm is shown to report volume fluctuations compatible with the isobaric ensemble and its anisotropic variant is tested on a membrane simulation. Stochastic cell rescaling can be straightforwardly implemented in the existing codes and can be used effectively in both equilibration and production phases. [ABSTRACT FROM AUTHOR]

In this paper, we have analyzed the time series associated with the iterative scheme of a double similarity transformed coupled cluster theory. The coupled iterative scheme to solve the ground state Schrödinger equation is cast as a multivariate time-discrete map, and the solutions show the universal Feigenbaum dynamics. Using recurrence analysis, it is shown that the dynamics of the iterative process is dictated by a small subgroup of cluster operators, mostly those involving chemically active orbitals, whereas all other cluster operators with smaller amplitudes are enslaved. Using synergetics, we will indicate how the master-slave dynamics can suitably be exploited to develop a novel coupled-cluster algorithm in a much reduced dimension. [ABSTRACT FROM AUTHOR]

We present NECI, a state-of-the-art implementation of the Full Configuration Interaction Quantum Monte Carlo (FCIQMC) algorithm, a method based on a stochastic application of the Hamiltonian matrix on a sparse sampling of the wave function. The program utilizes a very powerful parallelization and scales efficiently to more than 24 000 central processing unit cores. In this paper, we describe the core functionalities of NECI and its recent developments. This includes the capabilities to calculate ground and excited state energies, properties via the one- and two-body reduced density matrices, as well as spectral and Green's functions for ab initio and model systems. A number of enhancements of the bare FCIQMC algorithm are available within NECI, allowing us to use a partially deterministic formulation of the algorithm, working in a spin-adapted basis or supporting transcorrelated Hamiltonians. NECI supports the FCIDUMP file format for integrals, supplying a convenient interface to numerous quantum chemistry programs, and it is licensed under GPL-3.0. [ABSTRACT FROM AUTHOR]

We have developed an algorithm to detect holes in multi-dimensional real-valued surfaces—such as the potential energy surfaces (PESs) that describe the nuclear motion of molecules in the context of the Born–Oppenheimer approximation. For our purposes, a PES "hole" is defined as an unphysical saddle point, beyond which the potential energy drops (typically) without limit to negative infinity. PES holes are numerical artifacts that can arise when fitting PES functional forms to discrete ab initio data—even when the data is of high quality, and/or for comparatively few degrees of freedom (DOF). Often undetected, PES holes can have devastating effects on subsequent dynamical calculations, especially if they occur at low energies. In this paper, we present a highly efficient algorithm designed to systematically identify hole configurations and energies. The method is applied to a variety of molecular PESs ranging up to 30 DOF. A number of evidently previously undetected PES holes are reported here—surprisingly, even for PESs that have been available for decades. The code itself (Crystal) is presented together with a user manual. These tools may be of great benefit for PES developers, who can use the information they provide to fix holes, once identified. More generally, the methodology can be applied in any context involving multi-dimensional surfaces. [ABSTRACT FROM AUTHOR]

A good understanding and determination of colloidal interactions is paramount to comprehend and model the thermodynamic and structural properties of colloidal suspensions. In concentrated aqueous suspensions of colloids with a titratable surface charge, this determination is, however, complicated by the density dependence of the effective pair potential due to both the many-body interactions and the charge regulation of the colloids. In addition, colloids generally present a size distribution which results in a virtually infinite combination of colloid pairs. In this paper, we develop two methods and describe the corresponding algorithms to solve this problem for arbitrary size distributions. An implementation in Nim is also provided. The methods, inspired by the seminal work of Torres et al., [J. Chem. Phys. 128, 154906 (2008)] are based on a generalization of the cell and renormalized jellium models to polydisperse suspensions of spherical colloids with a charge regulating boundary condition. The latter is described by the one-pK-Stern model. The predictions of the models are confronted to the equations of state of various commercially available silica dispersions. The renormalized Yukawa parameters (effective charges and screening lengths) are also calculated. The importance of size and charge polydispersity as well as the validity of these two models is discussed in light of the results. [ABSTRACT FROM AUTHOR]

This paper presents in detail our fast semistochastic heat-bath configuration interaction (SHCI) method for solving the many-body Schrödinger equation. We identify and eliminate computational bottlenecks in both the variational and perturbative steps of the SHCI algorithm. We also describe the parallelization and the key data structures in our implementation, such as the distributed hash table. The improved SHCI algorithm enables us to include in our variational wavefunction two orders of magnitude more determinants than has been reported previously with other selected configuration interaction methods. We use our algorithm to calculate an accurate benchmark energy for the chromium dimer with the X2C relativistic Hamiltonian in the cc-pVDZ-DK basis, correlating 28 electrons in 76 spatial orbitals. Our largest calculation uses two billion Slater determinants in the variational space and semistochastically includes perturbative contributions from at least trillions of additional determinants with better than 10−5 Ha statistical uncertainty. [ABSTRACT FROM AUTHOR]

A new method of the stochastic simulation algorithm (SSA), named the Hashing-Leaping method (HLM), for exact simulations of a class of Markov jump processes, is presented in this paper. The HLM has a conditional constant computational cost per event, which is independent of the number of exponential clocks in the Markov process. The main idea of the HLM is to repeatedly implement a hash-table-like bucket sort algorithm for all times of occurrence covered by a time step with length t. This paper serves as an introduction to this new SSA method. We introduce the method, demonstrate its implementation, analyze its properties, and compare its performance with three other commonly used SSA methods in four examples. Our performance tests and CPU operation statistics show certain advantages of the HLM for large scale problems. [ABSTRACT FROM AUTHOR]

The particle-particle random phase approximation (pp-RPA) has been used to investigate excitation problems in our recent paper [Y. Yang, H. van Aggelen, and W. Yang, J. Chem. Phys. 139, 224105 (2013)]. It has been shown to be capable of describing double, Rydberg, and charge transfer excitations, which are challenging for conventional time-dependent density functional theory (TDDFT). However, its performance on larger molecules is unknown as a result of its expensive O(N6) scaling. In this article, we derive and implement a Davidson iterative algorithm for the pp-RPA to calculate the lowest few excitations for large systems. The formal scaling is reduced to O(N4), which is comparable with the commonly used configuration interaction singles (CIS) and TDDFT methods. With this iterative algorithm, we carried out benchmark tests on molecules that are significantly larger than the molecules in our previous paper with a reasonably large basis set. Despite some self-consistent field convergence problems with ground state calculations of (N - 2)-electron systems, we are able to accurately capture lowest few excitations for systems with converged calculations. Compared to CIS and TDDFT, there is no systematic bias for the pp-RPA with the mean signed error close to zero. The mean absolute error of pp-RPA with B3LYP or PBE references is similar to that of TDDFT, which suggests that the pp-RPA is a comparable method to TDDFT for large molecules. Moreover, excitations with relatively large non-HOMO excitation contributions are also well described in terms of excitation energies, as long as there is also a relatively large HOMO excitation contribution. These findings, in conjunction with the capability of pp-RPA for describing challenging excitations shown earlier, further demonstrate the potential of pp-RPA as a reliable and general method to describe excitations, and to be a good alternative to TDDFT methods. [ABSTRACT FROM AUTHOR]

In recent years, the machine learning techniques have shown great potent1ial in various problems from a multitude of disciplines, including materials design and drug discovery. The high computational speed on the one hand and the accuracy comparable to that of density functional theory on another hand make machine learning algorithms efficient for high-throughput screening through chemical and configurational space. However, the machine learning algorithms available in the literature require large training datasets to reach the chemical accuracy and also show large errors for the so-called outliers—the out-of-sample molecules, not well-represented in the training set. In the present paper, we propose a new machine learning algorithm for predicting molecular properties that addresses these two issues: it is based on a local model of interatomic interactions providing high accuracy when trained on relatively small training sets and an active learning algorithm of optimally choosing the training set that significantly reduces the errors for the outliers. We compare our model to the other state-of-the-art algorithms from the literature on the widely used benchmark tests. [ABSTRACT FROM AUTHOR]

The reaction-diffusion master equation (RDME) is a model that allows for efficient on-lattice simulation of spatially resolved stochastic chemical kinetics. Compared to off-lattice hard-sphere simulations with Brownian dynamics or Green's function reaction dynamics, the RDME can be orders of magnitude faster if the lattice spacing can be chosen coarse enough. However, strongly diffusion-controlled reactions mandate a very fine mesh resolution for acceptable accuracy. It is common that reactions in the same model differ in their degree of diffusion control and therefore require different degrees of mesh resolution. This renders mesoscopic simulation inefficient for systems with multiscale properties. Mesoscopic-microscopic hybrid methods address this problem by resolving the most challenging reactions with a microscale, off-lattice simulation. However, all methods to date require manual partitioning of a system, effectively limiting their usefulness as "black-box" simulation codes. In this paper, we propose a hybrid simulation algorithm with automatic system partitioning based on indirect a priori error estimates.We demonstrate the accuracy and efficiency of the method on models of diffusion-controlled networks in 3D. [ABSTRACT FROM AUTHOR]

Molecular Dynamics-Green's Function Reaction Dynamics (MD-GFRD) is a multiscale simulation method for particle dynamics or particle-based reaction-diffusion dynamics that is suited for systems involving low particle densities. Particles in a low-density region are just diffusing and not interacting. In this case, one can avoid the costly integration of microscopic equations of motion, such as molecular dynamics (MD), and instead turn to an event-based scheme in which the times to the next particle interaction and the new particle positions at that time can be sampled. At high (local) concentrations, however, e.g., when particles are interacting in a nontrivial way, particle positions must still be updated with small time steps of the microscopic dynamical equations. The efficiency of a multiscale simulation that uses these two schemes largely depends on the coupling between them and the decisions when to switch between the two scales. Here we present an efficient scheme for multi-scale MD-GFRDsimulations. It has been shownthatMD-GFRDschemes are more efficient than brute-force molecular dynamics simulations up to a molar concentration of 10² µM. In this paper, we showthat the choice of the propagation domains has a relevant impact on the computational performance. Domains are constructed using a local optimization of their sizes and a minimal domain size is proposed. The algorithm is shown to be more efficient than brute-force Brownian dynamics simulations up to a molar concentration of 10³ µM and is up to an order of magnitude more efficient compared with previous MD-GFRD schemes. [ABSTRACT FROM AUTHOR]

The chemical master equation (CME) is frequently used in systems biology to quantify the effects of stochastic fluctuations that arise due to biomolecular species with low copy numbers. The CME is a system of ordinary differential equations that describes the evolution of probability density for each population vector in the state-space of the stochastic reaction dynamics. For many examples of interest, this state-space is infinite, making it difficult to obtain exact solutions of the CME. To deal with this problem, the Finite State Projection (FSP) algorithm was developed by Munsky and Khammash [J. Chem. Phys. 124(4), 044104 (2006)], to provide approximate solutions to the CME by truncating the state-space. The FSP works well for finite time-periods but it cannot be used for estimating the stationary solutions of CMEs, which are often of interest in systems biology. The aim of this paper is to develop a version of FSP which we refer to as the stationary FSP (sFSP) that allows one to obtain accurate approximations of the stationary solutions of a CME by solving a finite linear-algebraic system that yields the stationary distribution of a continuous-time Markov chain over the truncated state-space.We derive bounds for the approximation error incurred by sFSP and we establish that under certain stability conditions, these errors can be made arbitrarily small by appropriately expanding the truncated state-space. We provide several examples to illustrate our sFSP method and demonstrate its efficiency in estimating the stationary distributions. In particular, we show that using a quantized tensor-train implementation of our sFSP method, problems admitting more than 100 x 106 states can be efficiently solved. [ABSTRACT FROM AUTHOR]

Massively parallel algorithms are presented in this paper to reduce the computational burden associated with quantum transport simulations from first-principles. The power of modern hybrid computer architectures is harvested in order to determine the open boundary conditions that connect the simulation domain with its environment and to solve the resulting Schrödinger equation. While the former operation takes the form of an eigenvalue problem that is solved by a contour integration technique on the available central processing units (CPUs), the latter can be cast into a linear system of equations that is simultaneously processed by SplitSolve, a two-step algorithm, on general-purpose graphics processing units (GPUs). A significant decrease of the computational time by up to two orders of magnitude is obtained as compared to standard solution methods. [ABSTRACT FROM AUTHOR]

Molecular dynamics simulations are useful in obtaining thermodynamic and kinetic properties of bio-molecules, but they are limited by the time scale barrier. That is, we may not obtain properties' efficiently because we need to run microseconds or longer simulations using femtosecond time steps. To overcome this time scale barrier, we can use the weighted ensemble (WE) method, a powerful enhanced sampling method that efficiently samples thermodynamic and kinetic properties. However, the WE method requires an appropriate partitioning of phase space into discrete macrostates, which can be problematic when we have a high-dimensional collective space or when little is known a priori about the molecular system. Hence, we developed a new WE-based method, called the "Concurrent Adaptive Sampling (CAS) algorithm," to tackle these issues. The CAS algorithm is not constrained to use only one or two collective variables, unlike most reaction coordinate-dependent methods. Instead, it can use a large number of collective variables and adaptive macrostates to enhance the sampling in the high-dimensional space. This is especially useful for systems in which we do not know what the right reaction coordinates are, in which case we can use many collective variables to sample conformations and pathways. In addition, a clustering technique based on the committor function is used to accelerate sampling the slowest process in the molecular system. In this paper, we introduce the new method and show results from two-dimensional models and bio-molecules, specifically penta-alanine and a triazine trimer. [ABSTRACT FROM AUTHOR]

In the present study, variational path integral molecular dynamics and associated hybrid Monte Carlo (HMC) methods have been developed on the basis of a fourth order approximation of a density operator. To reveal various parameter dependence of physical quantities, we analytically solve one dimensional harmonic oscillators by the variational path integral; as a byproduct, we obtain the analytical expression of the discretized density matrix using the fourth order approximation for the oscillators. Then, we apply our methods to realistic systems like a water molecule and a para-hydrogen cluster. In the HMC, we adopt two level description to avoid the time consuming Hessian evaluation. For the systems examined in this paper, the HMC method is found to be about three times more efficient than the molecular dynamics method if appropriate HMC parameters are adopted; the advantage of the HMC method is suggested to be more evident for systems described by many body interaction. [ABSTRACT FROM AUTHOR]

The frequently used reduction technique is based on the chemical master equation for stochastic chemical kinetics with two-time scales, which yields the modified stochastic simulation algorithm (SSA). For the chemical reaction processes involving a large number of molecular species and reactions, the collection of slow reactions may still include a large number of molecular species and reactions. Consequently, the SSA is still computationally expensive. Because the chemical Langevin equations (CLEs) can effectively work for a large number of molecular species and reactions, this paper develops a reduction method based on the CLE by the stochastic averaging principle developed in the work of Khasminskii and Yin [SIAM J. Appl. Math. 56, 1766-1793 (1996); ibid. 56, 1794-1819 (1996)] to average out the fast-reacting variables. This reduction method leads to a limit averaging system, which is an approximation of the slow reactions. Because in the stochastic chemical kinetics, the CLE is seen as the approximation of the SSA, the limit averaging system can be treated as the approximation of the slow reactions. As an application, we examine the reduction of computation complexity for the gene regulatory networks with two-time scales driven by intrinsic noise. For linear and nonlinear protein production functions, the simulations show that the sample average (expectation) of the limit averaging system is close to that of the slow-reaction process based on the SSA. It demonstrates that the limit averaging system is an efficient approximation of the slow-reaction process in the sense of the weak convergence. [ABSTRACT FROM AUTHOR]

In this paper, we present a novel hybrid method to simulate discrete stochastic reaction-diffusion models arising in biochemical signaling pathways. We study moderately stiff systems, for which we can partition each reaction or diffusion channel into either a slow or fast subset, based on its propensity. Numerical approaches missing this distinction are often limited with respect to computational run time or approximation quality. We design an approximate scheme that remedies these pitfalls by using a new blending strategy of the well-established inhomogeneous stochastic simulation algorithm and the tau-leaping simulation method. The advantages of our hybrid simulation algorithm are demonstrated on three benchmarking systems, with special focus on approximation accuracy and efficiency. [ABSTRACT FROM AUTHOR]

In this paper, we describe a new and fully coherent stochastic surface hopping method for simulating mixed quantum-classical systems. We illustrate the approach on the simple but unforgiving problem of quantum evolution of a two-state quantum system in the limit of unperturbed pure state dynamics and for dissipative evolution in the presence of both stationary and nonstationary random environments. We formulate our approach in the Liouville representation and describe the density matrix elements by ensembles of trajectories. Population dynamics are represented by stochastic surface hops for trajectories representing diagonal density matrix elements. These are combined with an unconventional coherent stochastic hopping algorithm for trajectories representing off-diagonal quantum coherences. The latter generalizes the binary (0,1) "probability" of a trajectory to be associated with a given state to allow integers that can be negative or greater than unity in magnitude. Unlike existing surface hopping methods, the dynamics of the ensembles are fully entangled, correctly capturing the coherent and nonlocal structure of quantum mechanics. [ABSTRACT FROM AUTHOR]

Ligand diffusion through a protein interior is a fundamental process governing biological signaling and enzymatic catalysis. A complex topology of channels in proteins leads often to difficulties in modeling ligand escape pathways by classical molecular dynamics simulations. In this paper, two novel memetic methods for searching the exit paths and cavity space exploration are proposed: Memory Enhanced Random Acceleration (MERA) Molecular Dynamics (MD) and Immune Algorithm (IA). In MERA, a pheromone concept is introduced to optimize an expulsion force. In IA, hybrid learning protocols are exploited to predict ligand exit paths. They are tested on three protein channels with increasing complexity: M2 muscarinic G-protein-coupled receptor, enzyme nitrile hydratase, and heme-protein cytochrome P450cam. In these cases, the memetic methods outperform simulated annealing and random acceleration molecular dynamics. The proposed algorithms are general and appropriate in all problems where an accelerated transport of an object through a network of channels is studied. [ABSTRACT FROM AUTHOR]

The density-matrix renormalization group (DMRG) method, which can deal with a large active space composed of tens of orbitals, is nowadays widely used as an efficient addition to traditional complete active space (CAS)-based approaches. In this paper, we present the DMRG algorithm with a multi-level (ML) control of the active space based on chemical intuition-based hierarchical orbital ordering, which is called as ML-DMRG with its self-consistent field (SCF) variant MLDMRG- SCF. Ground and excited state calculations of H2O, N2, indole, and Cr2 with comparisons to DMRG references using fixed number of kept states (M) illustrate that ML-type DMRG calculations can obtain noticeable efficiency gains. It is also shown that the orbital re-ordering based on hierarchical multiple active subspaces may be beneficial for reducing computational time for not only ML-DMRG calculations but also DMRG ones with fixed M values. [ABSTRACT FROM AUTHOR]

In this paper, we report vibration-rotation-tunneling levels of the van der Waals clusters N2-H2O and N2-D2O computed from an ab initio potential energy surface. The only dynamical approximation is that the monomers are rigid. We use a symmetry adapted Lanczos algorithm and an uncoupled product basis set. The pattern of the cluster's levels is complicated by splittings caused by H-H exchange tunneling (larger splitting) and N-N exchange tunneling (smaller splitting). An interesting result that emerges from our calculation is that whereas in N2-H2O, the symmetric H-H tunnelling state is below the anti-symmetric H-H tunnelling state for both K = 0 and K = 1, the order is reversed in N2-D2O for K = 1. The only experimental splitting measurements are the D-D exchange tunneling splittings reported by Zhu et al. [J. Chem. Phys. 139, 214309 (2013)] for N2-D2O in the v2 = 1 region of D2O. Due to the inverted order of the split levels, they measure the sum of the K = 0 and K = 1 tunneling splittings, which is in excellent agreement with our calculated result. Other splittings we predict, in particular those of N2-H2O, may guide future experiments. [ABSTRACT FROM AUTHOR]

Stochastic simulation for in silico studies of large biochemical networks requires a great amount of computational time. We recently proposed a new exact simulation algorithm, called the rejectionbased stochastic simulation algorithm (RSSA) [Thanh et al., J. Chem. Phys. 141(13), 134116 (2014)], to improve simulation performance by postponing and collapsing as much as possible the propensity updates. In this paper, we analyze the performance of this algorithm in detail, and improve it for simulating large-scale biochemical reaction networks. We also present a new algorithm, called simultaneous RSSA (SRSSA), which generates many independent trajectories simultaneously for the analysis of the biochemical behavior. SRSSA improves simulation performance by utilizing a single data structure across simulations to select reaction firings and forming trajectories. The memory requirement for building and storing the data structure is thus independent of the number of trajectories. The updating of the data structure when needed is performed collectively in a single operation across the simulations. The trajectories generated by SRSSA are exact and independent of each other by exploiting the rejection-based mechanism. We test our new improvement on real biological systems with a wide range of reaction networks to demonstrate its applicability and efficiency. [ABSTRACT FROM AUTHOR]

The thermodynamic stability of a folded RNA is intricately tied to the counterions and the free energy of this interaction must be accounted for in any realistic RNA simulations. Extending a tight-binding model published previously, in this paper we investigate the fundamental structure of charges arising from the interaction between small functional RNA molecules and divalent ions such as Mg2+ that are especially conducive to stabilizing folded conformations. The characteristic nature of these charges is utilized to construct a discretely connected energy landscape that is then traversed via a novel application of a deterministic graph search technique. This search method can be incorporated into larger simulations of small RNA molecules and provides a fast and accurate way to calculate the free energy arising from the interactions between an RNA and divalent counterions. The utility of this algorithm is demonstrated within a fully atomistic Monte Carlo simulation of the P4-P6 domain of the Tetrahymena group I intron, in which it is shown that the counterionmediated free energy conclusively directs folding into a compact structure. [ABSTRACT FROM AUTHOR]

The nonadiabatic dynamics of model proton-coupled electron transfer (PCET) reactions is investigated for the first time using a surface-hopping algorithm based on the solution of the mixed quantum-classical Liouville equation (QCLE). This method provides a rigorous treatment of quantum coherence/decoherence effects in the dynamics of mixed quantum-classical systems, which is lacking in the molecular dynamics with quantum transitions surface-hopping approach commonly used for simulating PCET reactions. Within this approach, the protonic and electronic coordinates are treated quantum mechanically and the solvent coordinate evolves classically on both single adiabatic surfaces and on coherently coupled pairs of adiabatic surfaces. Both concerted and sequential PCET reactions are studied in detail under various subsystem-bath coupling conditions and insights into the dynamical principles underlying PCET reactions are gained. Notably, an examination of the trajectories reveals that the system spends the majority of its time on the average of two coherently coupled adiabatic surfaces, during which a phase enters into the calculation of an observable. In general, the results of this paper demonstrate the applicability of QCLE-based surfacehopping dynamics to the study of PCET and emphasize the importance of mean surface evolution and decoherence effects in the calculation of PCET rate constants. [ABSTRACT FROM AUTHOR]

In recent years, interest in the random-phase approximation (RPA) has grown rapidly. At the same time, tensor hypercontraction has emerged as an intriguing method to reduce the computational cost of electronic structure algorithms. In this paper, we combine the particle-particle random phase approximation with tensor hypercontraction to produce the tensor-hypercontracted particle-particle RPA (THC-ppRPA) algorithm. Unlike previous implementations of ppRPA which scale as O(r6), the THC-ppRPA algorithm scales asymptotically as only O(r4), albeit with a much larger prefactor than the traditional algorithm.We apply THC-ppRPA to several model systems and show that it yields the same results as traditional ppRPA to within mH accuracy. Our method opens the door to the development of post-Kohn Sham functionals based on ppRPA without the excessive asymptotic cost of traditional ppRPA implementations. [ABSTRACT FROM AUTHOR]

In this paper, we discuss properties of single-reference coupled cluster (CC) equations associated with the existence of sub-algebras of excitations that allow one to represent CC equations in a hybrid fashion where the cluster amplitudes associated with these sub-algebras can be obtained by solving the corresponding eigenvalue problem. For closed-shell formulations analyzed in this paper, the hybrid representation of CC equations provides a natural way for extending active-space and seniority number concepts to provide an accurate description of electron correlation effects. Moreover, a new representation can be utilized to re-define iterative algorithms used to solve CC equations, especially for tough cases defined by the presence of strong static and dynamical correlation effects. We will also explore invariance properties associated with excitation sub-algebras to define a new class of CC approximations referred to in this paper as the sub-algebra-flow-based CC methods. We illustrate the performance of these methods on the example of ground- and excited-state calculations for commonly used small benchmark systems. [ABSTRACT FROM AUTHOR]