Search

Dynamic vibration absorbers (DVAs) are widely used in engineering practice because of their good vibration control performance. Structural design or parameter optimization could improve its control efficiency. In this paper, the viscoelastic Maxwell-type DVA model with an inerter and multiple stiffness springs is investigated with the combination of the traditional theory and an intelligent algorithm. Firstly, the expressions and approximate optimal values of the system parameters are obtained using the fixed-point theory to deal with the H ∞ optimization problem, which can provide help with the range of parameters in the algorithm. Secondly, we innovatively introduce the particle swarm optimization (PSO) algorithm to prove that the algorithm could adjust the value of the approximate solution to minimize the maximum amplitude by analyzing and optimizing the single variable and four variables. Furthermore, the validity of the parameters is further verified by simulation between the numerical solution and the analytical solution using the fourth-order Runge–Kutta method. Finally, the DVA demonstrated in this paper is compared with typical DVAs under random excitation. The timing sequence and variances, as well as the decreased ratios of the displacements, show that the presented DVA has a more satisfactory control performance. The inerter and negative stiffness spring can indeed bring beneficial effects to the vibration absorber. Remarkably, the intelligent algorithm can make the resonance peaks equal in the parameter optimization of the vibration absorber, which is quite difficult to achieve with theoretical methods at present. The results may provide a theoretical and computational basis for the optimization design of DVA. [ABSTRACT FROM AUTHOR]

At complex industrial sites, the high number of large consumers that make the technological process chain requires direct supply from the main high-voltage grid. Often, for operational flexibility and redundancy, the main external supply is complemented with small local generation units. When a contingency occurs in the grid and the main supply is cut off, the local generators are used to keep in operation the critical consumers until the safe shutdown of the entire process can be achieved. In these scenarios, in order to keep the balance between local generation and consumption, the classic approach is to use under-frequency load-shedding schemes. This paper proposes a new load-shedding algorithm that uses particle swarm optimization and forecasted load data to provide a low-cost alternative to under-frequency methods. The algorithm is built using the requirements and input data provided by a real industrial site from Romania. The results show that local generation and critical consumption can be kept in stable operation for the time interval required for the safe shutdown of the running processes. [ABSTRACT FROM AUTHOR]

For order-of-addition experiments, the response is affected by the addition order of the experimental materials. Consequently, the main interest focuses on creating a predictive model and an optimal design for optimizing the response. Van Nostrand proposed the pairwise-order (PWO) model for detecting PWO effects. Under the PWO model, the full PWO design is optimal under various criteria but is often unaffordable because of the large run size. In this paper, we consider the D-, A- and M. S. -optimal fractional PWO designs. We first present some results on information matrices. Then, a flexible and efficient algorithm is given for generating these optimal PWO designs. Numerical simulation shows that the generated design has an appealing efficiency in comparison with the full PWO design, though with only a small fraction of runs. Several comparisons with existing designs illustrate that the generated designs achieve better efficiencies, and the best PWO designs and some selected 100% efficient PWO designs generated by the new algorithm are reported. [ABSTRACT FROM AUTHOR]

To solve the problem of crane anti-swing, fuzzy PID is a common method. However, the parameter configuration of fuzzy PID requires a lot of time and effort from professionals. Based on this, we introduce the LSO algorithm and add the stray operator, which effectively improves its global search performance. By combining SLSO and fuzzy PID and comparing them with other methods, this paper confirms that even without the targeted optimization by professionals, the optimization algorithm can find the appropriate parameter configuration for fuzzy PID which can be effectively used in the crane anti-swing problem. [ABSTRACT FROM AUTHOR]

End-to-end obstacle avoidance path planning for intelligent vehicles has been a widely studied topic. To resolve the typical issues of the solving algorithms, which are weak global optimization ability, ease in falling into local optimization and slow convergence speed, an efficient optimization method is proposed in this paper, based on the whale optimization algorithm. We present an adaptive adjustment mechanism which can dynamically modify search behavior during the iteration process of the whale optimization algorithm. Meanwhile, in order to coordinate the global optimum and local optimum of the solving algorithm, we introduce a controllable variable which can be reset according to specific routing scenarios. The evolutionary strategy of differential variation is also applied in the algorithm presented to further update the location of search individuals. In numerical experiments, we compared the proposed algorithm with the following six well-known swarm intelligence optimization algorithms: Particle Swarm Optimization (PSO), Bat Algorithm (BA), Gray Wolf Optimization Algorithm (GWO), Dragonfly Algorithm (DA), Ant Lion Algorithm (ALO), and the traditional Whale Optimization Algorithm (WOA). Our method gave rise to better results for the typical twenty-three benchmark functions. In regard to path planning problems, we observed an average improvement of 18.95% in achieving optimal solutions and 77.86% in stability. Moreover, our method exhibited faster convergence compared to some existing approaches. [ABSTRACT FROM AUTHOR]

In this paper, optimal and multi-objective planning of a hybrid energy system (HES) with wind turbine and battery storage (WT/Battery) has been proposed to drop power loss, smooth voltage profile, enhance customers reliability, as well as minimize the net present cost of the hybrid system plus the battery degradation cost (BDC). Decision variables include the installation site of the hybrid system and size of the wind farm and battery storage. These variables are found with the help of a novel metaheuristic approach called improved Fick's law algorithm (IFLA). To enhance the exploration performance and avoid the early incomplete convergence of the conventional Fick's law (FLA) algorithm, a dynamic lens-imaging learning strategy (DLILS) based on opposition learning has been adopted. The planning problem has been implemented in two approaches without and considering BDC to analyze its impact on the reserve power level and the amount and quality of power loss, voltage profile, and reliability. A 33-bus distribution system has also been employed to validate the capability and efficiency of the suggested method. Simulation results have shown that the multi-objective planning of the hybrid WT/Battery energy system improves voltage and reliability and decreases power loss by managing the reserve power based on charging and discharging battery units and creating electrical planning with optimal power injection into the network. The results of simulations and evaluation of statistic analysis indicate the superiority of the IFLA in achieving the optimal solution with faster convergence than conventional FLA, particle swarm optimization (PSO), manta ray foraging optimizer (MRFO), and bat algorithm (BA). It has been observed that the proposed methodology based on IFLA in different approaches has obtained lower power loss and more desirable voltage profile and reliability than its counterparts. Simulation reports demonstrate that by considering BDC, the values of losses and voltage deviations are increased by 2.82% and 1.34%, respectively, and the reliability of network customers is weakened by 5.59% in comparison with a case in which this cost is neglected. Therefore, taking into account this parameter in the objective function can lead to the correct and real calculation of the improvement rate of each of the objectives, especially the improvement of the reliability level, as well as making the correct decisions of network planners based on these findings. [ABSTRACT FROM AUTHOR]

In this paper, we study swarm intelligence computation for constrained optimization problems and propose a new hybrid PSO-DE algorithm based on feasibility rules. Establishing individual feasibility rules as a way to determine whether the position of an individual satisfies the constraint or violates the degree of the constraint, which will determine the choice of the individual optimal position and the global optimal position in the particle population. First, particle swarm optimization (PSO) is used to act on the top 50% of individuals with higher degree of constraint violation to update their velocity and position. Second, Differential Evolution (DE) is applied to act on the individual optimal position of each individual to form a new population. The current individual optimal position and the global optimal position are updated using the feasibility rules, thus forming a hybrid PSO-DE intelligent algorithm. Analyzing the convergence and complexity of PSO-DE. Finally, the performance of the PSO-DE algorithm is tested with 12 benchmark functions of constrained optimization and 57 engineering optimization problems, the numerical results show that the proposed algorithm has good accuracy, effectiveness and robustness. [ABSTRACT FROM AUTHOR]

The manta ray foraging optimizer (MRFO) is a novel nature-inspired optimization algorithm that simulates the foraging strategy and behavior of manta ray groups, i.e., chain, spiral, and somersault foraging. Although the native MRFO has revealed good competitive capability with popular meta-heuristic algorithms, it still falls into local optima and slows the convergence rate in dealing with some complex problems. In order to ameliorate these deficiencies of the MRFO, a new elite chaotic MRFO, termed the CMRFO algorithm, integrated with chaotic initialization of population and an opposition-based learning strategy, is developed in this paper. Fourteen kinds of chaotic maps with different properties are used to initialize the population. Thereby, the chaotic map with the best effect is selected; meanwhile, the sensitivity analysis of an elite selection ratio in an elite chaotic searching strategy to the CMRFO is discussed. These strategies collaborate to enhance the MRFO in accelerating overall performance. In addition, the superiority of the presented CMRFO is comprehensively demonstrated by comparing it with a native MRFO, a modified MRFO, and several state-of-the-art algorithms using (1) 23 benchmark test functions, (2) the well-known IEEE CEC 2020 test suite, and (3) three optimization problems in the engineering field, respectively. Furthermore, the practicability of the CMRFO is illustrated by solving a real-world application of shape optimization of cubic generalized Ball (CG-Ball) curves. By minimizing the curvature variation in these curves, the shape optimization model of CG-Ball ones is established. Then, the CMRFO algorithm is applied to handle the established model compared with some advanced meta-heuristic algorithms. The experimental results demonstrate that the CMRFO is a powerful and attractive alternative for solving engineering optimization problems. [ABSTRACT FROM AUTHOR]

The arithmetic optimization algorithm is a recently proposed metaheuristic algorithm. In this paper, an improved arithmetic optimization algorithm (IAOA) based on the population control strategy is introduced to solve numerical optimization problems. By classifying the population and adaptively controlling the number of individuals in the subpopulation, the information of each individual can be used effectively, which speeds up the algorithm to find the optimal value, avoids falling into local optimum, and improves the accuracy of the solution. The performance of the proposed IAOA algorithm is evaluated on six systems of nonlinear equations, ten integrations, and engineering problems. The results show that the proposed algorithm outperforms other algorithms in terms of convergence speed, convergence accuracy, stability, and robustness. [ABSTRACT FROM AUTHOR]

The difference between dual-gantry and single-gantry surface-mount placement (SMP) machines is that dual-gantry machines exhibit higher complexity and more problems due to their additional gantry robot, such as component allocation and collision. This paper presents algorithms to prescribe the assembly operations of a dual-gantry multi-head surface-mount placement machine. It considers five inter-related problems: (i) component allocation; (ii) automatic nozzle changer assignment; (iii) feeder arrangement; and (iv) pick-and-place sequence; it incorporates a practical restriction related to (v) component height. The paper proposes a solution to each problem: (i) equalizing "workloads" assigned to the gantries, (ii) using quantity ratio method, (iii) using two similarity measurement mechanisms in a modified differential evolution algorithm with a random-key encoding mapping method that addresses component height restriction, (iv) and a combination of nearest-neighbor search and 2-opt method to plan each placing operation. This study reports an experiment that involved the processing of 10 printed circuit boards and compared the performance of a modified differential evolution algorithm with well-known algorithms including differential evolution, particle swarm optimization, and genetic algorithm. The results reveal that the number of picks, moving distance of picking components, and total assembly time with the modified differential evolution algorithm are less than other algorithms. [ABSTRACT FROM AUTHOR]

Zadeh's extension principle is one of the elementary tools in fuzzy set theory, and among other things, it provides a natural extension of a real-valued continuous self-map to a self-map having fuzzy sets as its arguments. The purpose of this paper is to introduce a new algorithm that can be used for simulations of fuzzy dynamical systems induced by interval maps. The core of the proposed algorithm is based on calculations including piecewise linear maps, and consequently, an implementation of an optimization algorithm (in our case, particle swarm optimization) was prepared to obtain necessary piecewise linear approximations. For all parts of this algorithm, we provide detailed testing and numerous examples. [ABSTRACT FROM AUTHOR]

The decomposition-based multi-objective evolutionary algorithm (MOEA/D) has shown remarkable effectiveness in solving multi-objective problems (MOPs). In this paper, we integrate the quantum-behaved particle swarm optimization (QPSO) algorithm with the MOEA/D framework in order to make the QPSO be able to solve MOPs effectively, with the advantage of the QPSO being fully used. We also employ a diversity controlling mechanism to avoid the premature convergence especially at the later stage of the search process, and thus further improve the performance of our proposed algorithm. In addition, we introduce a number of nondominated solutions to generate the global best for guiding other particles in the swarm. Experiments are conducted to compare the proposed algorithm, DMO-QPSO, with four multi-objective particle swarm optimization algorithms and one multi-objective evolutionary algorithm on 15 test functions, including both bi-objective and tri-objective problems. The results show that the performance of the proposed DMO-QPSO is better than other five algorithms in solving most of these test problems. Moreover, we further study the impact of two different decomposition approaches, i.e., the penalty-based boundary intersection (PBI) and Tchebycheff (TCH) approaches, as well as the polynomial mutation operator on the algorithmic performance of DMO-QPSO. [ABSTRACT FROM AUTHOR]

The execution time that takes to perform numerical simulation of a chaotic oscillator mainly depends on the time-step h. This paper shows that the optimization of chaotic oscillators can be enhanced by estimating the highest h in either one-step or multi-step methods. Four chaotic oscillators are used as a case study, and the optimization of their Kaplan-Yorke dimension ( D K Y ) is performed by applying three metaheuristics, namely: particle swarm optimization (PSO), many optimizing liaison (MOL), and differential evolution (DE) algorithms. Three representative one-step and three multi-step methods are used to solve the four chaotic oscillators, for which the estimation of the highest h is obtained from their stability analysis. The optimization results show the effectiveness of using a high h value for the six numerical methods in reducing execution time while maximizing the positive Lyapunov exponent ( L E + ) and D K Y of the chaotic oscillators by applying PSO, MOL, and DE algorithms. [ABSTRACT FROM AUTHOR]

Bio-inspired computing is an engaging area of artificial intelligence which studies how natural phenomena provide a rich source of inspiration in the design of smart procedures able to become powerful algorithms. Many of these procedures have been successfully used in classification, prediction, and optimization problems. Swarm intelligence methods are a kind of bio-inspired algorithm that have been shown to be impressive optimization solvers for a long time. However, for these algorithms to reach their maximum performance, the proper setting of the initial parameters by an expert user is required. This task is extremely comprehensive and it must be done in a previous phase of the search process. Different online methods have been developed to support swarm intelligence techniques, however, this issue remains an open challenge. In this paper, we propose a hybrid approach that allows adjusting the parameters based on a state deducted by the swarm intelligence algorithm. The state deduction is determined by the classification of a chain of observations using the hidden Markov model. The results show that our proposal exhibits good performance compared to the original version. [ABSTRACT FROM AUTHOR]