Search

• An optical fiber strain sensor based on metal welding has been presented. • The proposed fiber sensor has the strain sensitivity of 9.11 pm/με. • The fiber sensor has the advantages of easy fabrication and low cost. • The relationship between capillary length and strain sensitivity is investigated. This paper presents a strain sensor based on Fabry-Perot (F-P) interference. The F-P strain sensor is composed of a single-mode fiber (SMF) and a silica capillary, which are encapsulated by metal welding. The relationship between the cavity length and sensitivity is analyzed theoretically, then the F-P strain sensor is calibrated and tested. The experiment results show that the strain sensitivity of the fabricated sensor reaches 4.4 pm/με when the length of the silica capillary is 12 mm and the F-P cavity length is 436 μm. In addition, the temperature sensitivity of the F-P sensor is 11.7 pm/°C. With the increase of the capillary, the strain sensitivity increases. When the capillary length is 20 mm and the cavity length is 341 μm, the sensitivity of the sensor reaches 9.11 pm/με. The sensor proposed fabricated by metal welding, has the advantages of high sensitivity, simple fabrication, simple structure, and low cost. [ABSTRACT FROM AUTHOR]