Search

Remote sensing technology is vital for precision agriculture, aiding in early issue detection, resource management, and environmentally friendly practices. Recent advances in remote sensing technology and data processing have propelled unmanned aerial vehicles (UAVs) into valuable tools for obtaining detailed data on plant diseases with high spatial, temporal, and spectral resolution. Given the growing body of scholarly research centered on UAV-based disease detection, a comprehensive review and analysis of current studies becomes imperative to provide a panoramic view of evolving methodologies in plant disease monitoring and to strategically evaluate the potential and limitations of such strategies. This study undertakes a systematic quantitative literature review to summarize existing literature and discern current research trends in UAV-based applications for plant disease detection and monitoring. Results reveal a global disparity in research on the topic, with Asian countries being the top contributing countries (43 out of 103 papers). World regions such as Oceania and Africa exhibit comparatively lesser representation. To date, research has largely focused on diseases affecting wheat, sugar beet, potato, maize, and grapevine. Multispectral, reg-green-blue, and hyperspectral sensors were most often used to detect and identify disease symptoms, with current trends pointing to approaches integrating multiple sensors and the use of machine learning and deep learning techniques. Future research should prioritize (i) development of cost-effective and user-friendly UAVs, (ii) integration with emerging agricultural technologies, (iii) improved data acquisition and processing efficiency (iv) diverse testing scenarios, and (v) ethical considerations through proper regulations. [ABSTRACT FROM AUTHOR]

Africa has the largest grassland area among all grassland ecosystems in the world. As a typical agricultural and animal husbandry country in Africa, animal husbandry plays an important role in this region. The investigation of grassland resources and timely grasping the quantity and spatial distribution of grassland resources are of great significance to the stable development of local animal husbandry economy. Therefore, this paper uses Kenya as the study area to investigate the effective and fast approach for grassland mapping with 100-m resolution using the open resources in the Google Earth Engine cloud platform. The main conclusions are as follows. (1) In the feature combination optimization part of this paper, the machine learning algorithm is used to compare the scores and standard deviations of several common algorithms combined with RFE. It is concluded that the combination of RFE and random forest algorithm has the highest stability in modeling and the best feature optimization effect. (2) After feature optimization by the RFE-RF algorithm, the number of features is reduced from 12 to 8, which compressed the original feature space and reduced the redundancy of features. The optimal combination features are applied to random forest classification, and the overall accuracy and Kappa coefficient of classification are 0.87 and 0.85, respectively. The eight features are: elevation, NDVI, EVI, SWIR, RVI, BLUE, RED, and LSWI. (3) There are great differences in topographic features among the local land types in the study area, and the addition of topographic features is more conducive to the recognition and classification of various land types. There exists "salt-and-pepper phenomenon" in pixel-oriented classification. Later research focus will combine the RFE-RF algorithm and the segmentation algorithm to achieve object-oriented land cover classification. [ABSTRACT FROM AUTHOR]

The Water Observation and Information System (WOIS) is an open source software tool for monitoring, assessing and inventorying water resources in a cost-effective manner using Earth Observation (EO) data. The WOIS has been developed by, among others, the authors of this paper under the TIGER-NET project, which is a major component of the TIGER initiative of the European Space Agency (ESA) and whose main goal is to support the African Earth Observation Capacity for Water Resource Monitoring. TIGER-NET aims to support the satellite-based assessment and monitoring of water resources from watershed to cross-border basin levels through the provision of a free and powerful software package, with associated capacity building, to African authorities. More than 28 EO data processing solutions for water resource management tasks have been developed, in correspondence with the requirements of the participating key African water authorities, and demonstrated with dedicated case studies utilizing the software in operational scenarios. They cover a wide range of themes and information products, including basin-wide characterization of land and water resources, lake water quality monitoring, hydrological modeling and flood forecasting and mapping. For each monitoring task, step-by-step workflows were developed, which can either be adjusted by the user or largely automatized to feed into existing data streams and reporting schemes. The WOIS enables African water authorities to fully exploit the increasing EO capacity offered by current and upcoming generations of satellites, including the Sentinel missions. [ABSTRACT FROM AUTHOR]

During the past years, unmanned aerial vehicles (UAVs) gained importance as a tool to quickly collect high-resolution imagery as base data for cadastral mapping. However, the fact that UAV-derived geospatial information supports decision-making processes involving people's land rights ultimately raises questions about data quality and accuracy. In this vein, this paper investigates different flight configurations to give guidance for efficient and reliable UAV data acquisition. Imagery from six study areas across Europe and Africa provide the basis for an integrated quality assessment including three main aspects: (1) the impact of land cover on the number of tie-points as an indication on how well bundle block adjustment can be performed, (2) the impact of the number of ground control points (GCPs) on the final geometric accuracy, and (3) the impact of different flight plans on the extractability of cadastral features. The results suggest that scene context, flight configuration, and GCP setup significantly impact the final data quality and subsequent automatic delineation of visual cadastral boundaries. Moreover, even though the root mean square error of checkpoint residuals as a commonly accepted error measure is within a range of few centimeters in all datasets, this study reveals large discrepancies of the accuracy and the completeness of automatically detected cadastral features for orthophotos generated from different flight plans. With its unique combination of methods and integration of various study sites, the results and recommendations presented in this paper can help land professionals and bottom-up initiatives alike to optimize existing and future UAV data collection workflows. [ABSTRACT FROM AUTHOR]

The type of algorithm employed to classify remote sensing imageries plays a great role in affecting the accuracy. In recent decades, machine learning (ML) has received great attention due to its robustness in remote sensing image classification. In this regard, random forest (RF) and support vector machine (SVM) are two of the most widely used ML algorithms to generate land cover (LC) maps from satellite imageries. Although several comparisons have been conducted between these two algorithms, the findings are contradicting. Moreover, the comparisons were made on local-scale LC map generation either from high or medium resolution images using various software, but not Python. In this paper, we compared the performance of these two algorithms for large area LC mapping of parts of Africa using coarse resolution imageries in the Python platform by the employing Scikit-Learn (sklearn) library. We employed a big dataset, 297 metrics, comprised of systematically selected 9-month composite FegnYun-3C (FY-3C) satellite images with 1 km resolution. Several experiments were performed using a range of values to determine the best values for the two most important parameters of each classifier, the number of trees and the number of variables, for RF, and penalty value and gamma for SVM, and to obtain the best model of each algorithm. Our results showed that RF outperformed SVM yielding 0.86 (OA) and 0.83 (k), which are 1–2% and 3% higher than the best SVM model, respectively. In addition, RF performed better in mixed class classification; however, it performed almost the same when classifying relatively pure classes with distinct spectral variation, i.e., consisting of less mixed pixels. Furthermore, RF is more efficient in handling large input datasets where the SVM fails. Hence, RF is a more robust ML algorithm especially for heterogeneous large area mapping using coarse resolution images. Finally, default parameter values in the sklearn library work well for satellite image classification with minor/or no adjustment for these algorithms. [ABSTRACT FROM AUTHOR]

Demand for agricultural products is increasing as population continues to grow in Africa. To attain a higher crop yield while preserving the environment, appropriate management of macronutrients (i.e., nitrogen (N), phosphorus (P) and potassium (K)) and crops are of critical prominence. This paper aims to review the state of art of the use of remote sensing in soil agricultural applications, especially in monitoring NPK availability for widely grown crops in Africa. In this study, we conducted a substantial literature review of the use of airborne imaging technology (e.g., different platforms and sensors), methods available for processing and analyzing spectral information, and advances of these applications in farming practices by the African scientific community. Here we aimed to identify knowledge gaps in this field and challenges related to the acquisition, processing, and analysis of hyperspectral imagery for soil agriculture investigations. To do so, publications over the past 10 years (i.e., 2008–2021) in hyperspectral imaging technology and applications in monitoring macronutrients status for crops were reviewed. In this study, the imaging platforms and sensors, as well as the different methods of processing encountered across the literature, were investigated and their benefit for NPK assessment were highlighted. Furthermore, we identified and selected particular spectral regions, bands, or features that are most sensitive to describe NPK content (both in crop and soil) that allowed to characterize NPK. In this review, we proposed a hyperspectral data-based research protocol to quantify variability of NPK in soil and crop at the field scale for the sake of optimizing fertilizers application. We believe that this review will contribute promoting the adoption of hyperspectral technology (i.e., imaging and spectroscopy) for the optimization of soil NPK investigation, mapping, and monitoring in many African countries. [ABSTRACT FROM AUTHOR]

Africa has the largest population growth rate in the world and an agricultural system characterized by the predominance of smallholder farmers. Improving food security in Africa will require a good understanding of farming systems yields as well as reducing yield gaps (i.e., the difference between potential yield and actual farmer yield). To this end, crop yield gap practices in African countries need to be understood to fill this gap while decreasing the environmental impacts of agricultural systems. For instance, the variability of yields has been demonstrated to be strongly controlled by soil fertilizer use, irrigation management, soil attribute, and the climate. Consequently, the quantitative assessment and mapping information of soil attributes such as nitrogen (N), phosphorus (P), potassium (K), soil organic carbon (SOC), moisture content (MC), and soil texture (i.e., clay, sand and silt contents) on the ground are essential to potentially reducing the yield gap. However, to assess, measure, and monitor these soil yield-related parameters in the field, there is a need for rapid, accurate, and inexpensive methods. Recent advances in remote sensing technologies and high computational performances offer a unique opportunity to implement cost-effective spatiotemporal methods for estimating crop yield with important levels of scalability. However, researchers and scientists in Africa are not taking advantage of the opportunity of increasingly available geospatial remote sensing technologies and data for yield studies. The objectives of this report are to (i) conduct a review of scientific literature on the current status of African yield gap analysis research and their variation in regard to soil properties management by using remote sensing techniques; (ii) review and describe optimal yield practices in Africa; and (iii) identify gaps and limitations to higher yields in African smallholder farms and propose possible improvements. Our literature reviewed 80 publications and covered a period of 22 years (1998-2020) over many selected African countries with a potential yield improvement. Our results found that (i) the number of agriculture yield-focused remote sensing studies has gradually increased, with the largest proportion of studies published during the last 15 years; (ii) most studies were conducted exclusively using multispectral Landsat and Sentinel sensors; and (iii) over the past decade, hyperspectral imagery has contributed to a better understanding of yield gap analysis compared to multispectral imagery; (iv) soil nutrients (i.e., NPK) are not the main factor influencing the studied crop productivity in Africa, whereas clay, SOC, and soil pH were the most examined soil properties in prior papers. [ABSTRACT FROM AUTHOR]

In the past few decades, most urban areas in the world have been facing the pressure of an increasing population living in poverty. A recent study has shown that up to 80% of the population of some cities in Africa fall under the poverty line. Other studies have shown that poverty is one of the main contributors to residents' poor health and social conflict. Reducing the number of people living in poverty and improving their living conditions have become some of the main tasks for many nations and international organizations. On the other hand, urban gentrification has been taking place in the poor neighborhoods of all major cities in the world. Although gentrification can reduce the poverty rate and increase the GDP and tax revenue of cities and potentially bring opportunities for poor communities, it displaces the original residents of the neighborhoods, negatively impacting their living and access to social services. In order to support the sustainable development of cities and communities and improve residents' welfare, it is essential to identify the location, scale, and dynamics of urban poverty and gentrification, and remote sensing can play a key role in this. This paper reviews, summarizes, and evaluates state-of-the-art approaches for identifying and mapping urban poverty and gentrification with remote sensing, GIS, and machine learning techniques. It also discusses the pros and cons of remote sensing approaches in comparison with traditional approaches. With remote sensing approaches, both spatial and temporal resolutions for the identification of poverty and gentrification have been dramatically increased, while the economic cost is significantly reduced. [ABSTRACT FROM AUTHOR]

Crop production is a major source of food and livelihood for many people in arid and semi-arid (ASA) regions across the world. However, due to irregular climatic events, ASA regions are affected commonly by frequent droughts that can impact food production. In addition, ASA regions in the Middle East and Africa are often characterised by political instability, which can increase population vulnerability to hunger and ill health. Remote sensing (RS) provides a platform to improve the spatial prediction of crop production and food availability, with the potential to positively impact populations. This paper, firstly, describes some of the important characteristics of agriculture in ASA regions that require monitoring to improve their management. Secondly, it demonstrates how freely available RS data can support decision-making through a cost-effective monitoring system that complements traditional approaches for collecting agricultural data. Thirdly, it illustrates the challenges of employing freely available RS data for mapping and monitoring crop area, crop status and forecasting crop yield in these regions. Finally, existing approaches used in these applications are evaluated, and the challenges associated with their use and possible future improvements are discussed. We demonstrate that agricultural activities can be monitored effectively and both crop area and crop yield can be predicted in advance using RS data. We also discuss the future challenges associated with maintaining food security in ASA regions and explore some recent advances in RS that can be used to monitor cropland and forecast crop production and yield. [ABSTRACT FROM AUTHOR]

The importance of tourism for development is widely recognized. Travel restrictions imposed to contain the spread of COVID-19 have brought tourism to a halt. Tourism is one of the key sectors driving change in Africa and is based exclusively on natural assets, with wildlife being the main attraction. Economic activities, therefore, are clustered around conservation and protected areas. We used night-time light data as a proxy measure for economic activity to assess change due to the pandemic. Our analysis shows that overall, 75 percent of the 8427 protected areas saw a decrease in light intensity in varying degrees in all countries and across IUCN protected area categories, including in popular protected area destinations, indicating a reduction in tourism-related economic activities. As countries discuss COVID-19 recovery, the methods using spatially explicit data illustrated in this paper can assess the extent of change, inform decision-making, and prioritize recovery efforts. [ABSTRACT FROM AUTHOR]

This paper proposes a validation-comparison method for burned area (BA) products. The technique considers: (1) bootstrapping of scenes for validation-comparison and (2) permutation tests for validation. The research focuses on the tropical regions of Northern Hemisphere South America and Northern Hemisphere Africa and studies the accuracy of the BA products: MCD45, MCD64C5.1, MCD64C6, Fire CCI C4.1, and Fire CCI C5.0. The first and second parts consider methods based on random matrix theory for zone differentiation and multiple ancillary variables such as BA, the number of burned fragments, ecosystem type, land cover, and burned biomass. The first method studies the zone effect using bootstrapping of Riemannian, full Procrustes, and partial Procrustes distances. The second method explores the validation by using distance permutation tests under uncertainty. The results refer to Fire CCI 5.0 with the best BA description, followed by MCD64C6, MCD64C5.1, MCD45, and Fire CCI 4.1. It was also found that biomass, total BA, and the number of fragments affect the BA product accuracy. [ABSTRACT FROM AUTHOR]

Interfaces between protected areas and their peripheries in southern Africa are subject to interactions between wildlife and livestock that vary in frequency and intensity. In these areas, the juxtaposition between production and conservation land uses in a context of increasing anthropisation can create issues associated with human-wildlife coexistence and raises concerns for biodiversity conservation, local development and livelihoods. This literature review aimed at addressing the need to consolidate and gather in one article current knowledge on potential uses of satellite remote sensing (SRS) products by movement ecologists to investigate the sympatry of wildlife/domestic ungulates in savanna interface environments. A keyword querying process of peer reviewed scientific paper, thesis and books has been implemented to identify references that (1) characterize the main environmental drivers impacting buffalo (Syncerus caffer caffer) and cattle (Bos taurus & Bos indicus) movements in southern Africa environments, (2) describe the SRS contribution to discriminate and characterize these drivers. In total, 327 references have been selected and analyzed. Surface water, precipitation, landcover and fire emerged as key drivers impacting the buffalo and cattle movements. These environmental drivers can be efficiently characterized by SRS, mainly through open-access SRS products and standard image processing methods. Applying SRS to better understand buffalo and cattle movements in semi-arid environments provides an operational framework that could be replicated in other type of interface where different wild and domestic species interact. There is, however, a need for animal movement ecologists to reinforce their knowledge of remote sensing and/or to increase pluridisciplinary collaborations. [ABSTRACT FROM AUTHOR]

The present study evaluates the L band Vegetation Optical Depth (L-VOD) derived from the Soil Moisture and Ocean Salinity (SMOS) satellite to monitor Above Ground Biomass (AGB) at a global scale. Although SMOS L-VOD has been shown to be a good proxy for AGB in Africa and Tropics, little is known about this relationship at large scale. In this study, we further examine this relationship at a global scale using the latest AGB maps from Saatchi et al. and GlobBiomass computed using data acquired during the SMOS period. We show that at a global scale the L-VOD from SMOS is well-correlated with the AGB estimates from Saatchi et al. and GlobBiomass with the Pearson's correlation coefficients (R) of 0.91 and 0.94 respectively. Although AGB estimates in Africa and the Tropics are well-captured by SMOS L-VOD (R > 0.9), the relationship is less straightforward for the dense forests over the northern latitudes (R = 0.32 and 0.69 with Saatchi et al. and GlobBiomass respectively). This paper gives strong evidence in support of the sensitivity of SMOS L-VOD to AGB estimates at a globale scale, providing an interesting alternative and complement to exisiting sensors for monitoring biomass evolution. These findings can further facilitate research on biomass now that SMOS is providing more than 10 years of data. [ABSTRACT FROM AUTHOR]

The remote sensing based mapping of land cover at extensive scales, e.g., of whole continents, is still a challenging task because of the need for sophisticated pipelines that combine every step from data acquisition to land cover classification. Utilizing the Google Earth Engine (GEE), which provides a catalog of multi-source data and a cloud-based environment, this research generates a land cover map of the whole African continent at 10 m resolution. This land cover map could provide a large-scale base layer for a more detailed local climate zone mapping of urban areas, which lie in the focus of interest of many studies. In this regard, we provide a free download link for our land cover maps of African cities at the end of this paper. It is shown that our product has achieved an overall accuracy of 81% for five classes, which is superior to the existing 10 m land cover product FROM-GLC10 in detecting urban class in city areas and identifying the boundaries between trees and low plants in rural areas. The best data input configurations are carefully selected based on a comparison of results from different input sources, which include Sentinel-2, Landsat-8, Global Human Settlement Layer (GHSL), Night Time Light (NTL) Data, Shuttle Radar Topography Mission (SRTM), and MODIS Land Surface Temperature (LST). We provide a further investigation of the importance of individual features derived from a Random Forest (RF) classifier. In order to study the influence of sampling strategies on the land cover mapping performance, we have designed a transferability analysis experiment, which has not been adequately addressed in the current literature. In this experiment, we test whether trained models from several cities contain valuable information to classify a different city. It was found that samples of the urban class have better reusability than those of other natural land cover classes, i.e., trees, low plants, bare soil or sand, and water. After experimental evaluation of different land cover classes across different cities, we conclude that continental land cover mapping results can be considerably improved when training samples of natural land cover classes are collected and combined from areas covering each Köppen climate zone. [ABSTRACT FROM AUTHOR]

Near real-time precipitation is essential to many applications. In Africa, the lack of dense rain-gauge networks and ground weather radars makes the use of satellite precipitation products unavoidable. Despite major progresses in estimating precipitation rate from remote sensing measurements over the past decades, satellite precipitation products still suffer from quantitative uncertainties and biases compared to ground data. Consequently, almost all precipitation products are provided in two modes: a real-time mode (also called early-run or raw product) and a corrected mode (also called final-run, adjusted or post-processed product) in which ground precipitation measurements are integrated in algorithms to correct for bias, generally at a monthly timescale. This paper describes a new methodology to provide a near-real-time precipitation product based on satellite precipitation and soil moisture measurements. Recent studies have shown that soil moisture intrinsically contains information on past precipitation and can be used to correct precipitation uncertainties. The PrISM (Precipitation inferred from Soil Moisture) methodology is presented and its performance is assessed for five in situ rainfall measurement networks located in Africa in semi-arid to wet areas: Niger, Benin, Burkina Faso, Central Africa, and East Africa. Results show that the use of SMOS (Soil Moisture and Ocean Salinity) satellite soil moisture measurements in the PrISM algorithm most often improves the real-time satellite precipitation products, and provides results comparable to existing adjusted products, such as TRMM (Tropical Rainfall Measuring Mission), GPCC (Global Precipitation Climatology Centre) and IMERG (Integrated Multi-satellitE Retrievals for GPM), which are available a few weeks or months after their detection. [ABSTRACT FROM AUTHOR]