Search

Ground-penetrating radar (GPR) is a widely used technology for pipeline detection due to its fast detection speed and high resolution. However, the presence of complex underground media often results in strong ground clutter interference in the collected B-scan echoes, significantly impacting detection performance. To address this issue, this paper proposes an improved clutter suppression network based on a cycle-consistency generative adversarial network (CycleGAN). By employing the concept of style transfer, the network aims to convert clutter images into clutter-free images. This paper introduces multiple residual blocks into the generator and discriminator, respectively, to improve the feature expression ability of the deep learning model. Additionally, the discriminator incorporates the squeeze and excitation (SE) module, a channel attention mechanism, to further enhance the model's ability to extract features from clutter-free images. To evaluate the effectiveness of the proposed network in clutter suppression, both simulation and measurement data are utilized to compare and analyze its performance against traditional clutter suppression methods and deep learning-based methods, respectively. From the result of the measured data, it can be found that the improvement factor ( I m ) of the proposed method has reached 40.68 dB, which is a significant improvement compared to the previous network. [ABSTRACT FROM AUTHOR]

For airborne radar, detecting a low–slow–small (LSS) target is a hot and challenging topic, which results from the rapidly increasing number of non-cooperative flying LSS targets becoming of widespread concern, and the low signal-to-clutter ratio (SCR) of LSS targets results in the targets being particularly easily overwhelmed by the clutter. In this paper, a novel light gradient boosting machine (LightGBM)-based LSS target detection algorithm for airborne radar is proposed. The proposed method, based on the current real-time clutter environment of the range cell to be detected, firstly designs a specific real-time space-time LSS target signal repository with special dimensions and structures. Then, the proposed method creatively designs a new fast-built real-time training feature dataset specifically for the LSS target and the current clutter, together with a series of unique data transformations, sample selection, data restructuring, feature extraction, and feature processing. Finally, the proposed method develops a unique machine learning-based LSS target detection classifier model for the designed training dataset, by fully excavating and utilizing the advantages of the ensemble decision trees-based LightGBM. Consequently, the pre-processed data in the range cell of interest are classified using the proposed algorithm, which achieves LSS target detection by evaluating the output results of the designed classifier. Compared with the traditional classical target detection methods, the proposed algorithm is capable of providing markedly superior performance for LSS target detection. With an appropriate computational time, the proposed algorithm attains the highest probability of detecting LSS targets under the low SCR. The simulation outcomes and detection results with the experimental data are employed to validate the effectiveness and merits of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Non-side-looking airborne radar provides important applications on account of its all-round multi-angle airspace coverage. However, it suffers clutter range dependence that makes the samples fail to satisfy the condition of being independent and identically distributed (IID), and it severely degrades traditional approaches to clutter suppression and target detection. In this paper, a novel reweighted extreme learning machine (ELM)-based clutter suppression and range compensation algorithm is proposed for non-side-looking airborne radar. The proposed method involves first designing the pre-processing stage, the special reweighted complex-valued activation function containing an unknown range compensation matrix, and two new objective outputs for constructing an initial reweighted ELM-based network with its training. Then, two other objective outputs, a new loss function, and a reverse feedback framework driven by the specifically designed objectives are proposed for the unknown range compensation matrix. Finally, aiming to estimate and reconstruct the unknown compensation matrix, special processes of the complex-valued structures and the theoretical derivations are designed and analyzed in detail. Consequently, with the updated and compensated samples, further processing including space–time adaptive processing (STAP) can be performed for clutter suppression and target detection. Compared with the classic relevant methods, the proposed algorithm achieves significantly superior performance with reasonable computation time. It provides an obviously higher detection probability and better improvement factor (IF). The simulation results verify that the proposed algorithm is effective and has many advantages. [ABSTRACT FROM AUTHOR]

Ground-penetrating radar (GPR) is a classic geophysical exploration method that utilizes the emission and reception of electromagnetic waves to non-destructively detect target objects in the target medium. It has been widely applied in various fields such as pipeline detection, cavity detection, and rebar detection. However, GPR systems are susceptible to environmental clutter interference, which poses challenges for data interpretation and subsequent processing. In this paper, the separability of clutter and target signal in the frequency-wavenumber (F-K) domain is validated through modeling, leading to the proposal of a comprehensive clutter removal method based on the F-K domain for complex scenarios. The direct coupling wave is initially eliminated by applying a peak matching mean subtraction filter, which avoids the artifacts. Subsequently, the F-K domain transformation is performed and surface clutter undulations are effectively removed using a method based on singular value decomposition and k-means clustering. Finally, an angle filter with Gaussian tapering at the edges is designed based on physical models to efficiently eliminate linear interference without undesired ringing interference. The commonly used clutter removal algorithms, including mean subtraction (MS), singular value decomposition (SVD), robust principal component analysis (RPCA), and traditional F-K filtering methods, are compared with the proposed algorithm on both the numerical simulated data and actual GPR data. The results from visual and quantitative analysis confirm that our proposed method is more effective than current commonly used clutter suppression algorithms. We have successfully enhanced the Signal-to-Clutter Ratio (SCR) of the GPR data, resulting in an Improvement Factor (IF) of 30.63 dB, 23.59 dB, and 30.60 dB for simulated data, experimental data, and TU1208 public data, respectively. The detection capability of buried targets is enhanced, thereby establishing a solid foundation for subsequent data interpretation and target identification. [ABSTRACT FROM AUTHOR]

Ultra-wideband (UWB) vital detection radar plays an important role in post-disaster search and rescue, but the vital signal acquired in practice is often submerged in noise. In this paper, an advanced signal processing algorithm based on low-rank block-sparse representation is proposed to enhance the vital signal in life detection radar applications. The preprocessed echo signal can be decomposed into low-rank and block-sparse parts. The alternate direction method (ADM) is employed to obtain the block-sparse part containing the desired vital signal. We solve the subproblems involved in the ADM method using the Douglas/Peaceman–Rachford (DR) monotone operator splitting method. The projection method is applied to accelerate the calculation. Simulation and experimental results show that the proposed algorithm outperforms existing methods in terms of output signal-to-noise ratio (SNR). [ABSTRACT FROM AUTHOR]

Radar is a non-contact, high-precision vibration measurement device and an important tool for bridge vibration monitoring. Vibration information needs to be extracted from the radar phase, but the radar phase information is sensitive to noise. Under low signal-to-noise ratio (SNR) data acquisition conditions, such as low radar transmission power or a long observation distance, differential phase jump errors occur and clutter estimation becomes difficult, which leads to inaccurate inversion of vibration deformation. Traditional low-pass filtering methods can filter out noise to improve SNR, but they require oversampling. The sampling rate needs to be several times higher than the Doppler bandwidth, which is several times higher than the vibration frequency. This puts high data acquisition requirements on radar systems and causes large data volumes. Therefore, this paper proposes a novel vibration signal filtering method called the periodic filtering method. The method uses the periodicity feature of vibration signals for filtering without oversampling. This paper derives the time-domain and frequency-domain expressions for the periodic filter and presents a deformation inversion process based on them. The process involves extracting the vibration frequency in the Doppler domain, suppressing noise through periodic filtering, estimating clutter using circle fitting on the data complex plane, and inverting final deformation with differential phase. The method is verified through simulation experiments, calibration experiments, and bridge vibration experiments. The results show that the new periodic filtering method can improve the SNR by five times, resolve differential phase jumps, and accurately estimate clutter, thus getting submillimeter-level vibration deformation at low SNR. [ABSTRACT FROM AUTHOR]

The non-stationary clutter of space-based early warning radar (SBEWR) is more serious than that of airborne early warning radar. This phenomenon is primarily attributed to the Earth's rotation and range ambiguity. The increase in clutter degrees of freedom (DOFs) and the significant widening of the clutter suppression notch are not conducive to moving target detection near main lobe clutter. This paper proposes an effective approach to suppress non-stationary clutter based on an interpulse multi-frequency mode for SBEWR. Using the orthogonality of the uniform stepping frequency signal, partial range ambiguity can be effectively suppressed, and the clutter DOFs will be reduced. Subsequently, joint pitch-azimuth-Doppler three-dimensional spacetime adaptive processing and slant range preprocessing are used to perform clutter suppression. This combination not only curtails the estimation error associated with the clutter covariance matrix but also enhances the overall detection capabilities of the system. The simulation results verify the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

Radar is often affected by various clutter backgrounds in complex environments, so clutter suppression has important practical significance for radar target detection. The clutter suppression process conforms to the blind source separation (BSS) model. The principal skewness analysis (PSA) algorithm is a BSS algorithm with third-order statistics as the objective function, and its running speed is faster than the conventional BSS algorithm. Still, the PSA algorithm has the problem of error accumulation. This paper improves the PSA algorithm and proposes a parallel PSA (PPSA) algorithm. PPSA can estimate the directions corresponding to each independent component simultaneously and avoid the problem of error accumulation. PPSA uses parallel instead of serial computing, significantly improving the running speed. In this paper, the PPSA algorithm is applied to radar target detection. The simulation data and real data experiments verify the effectiveness and superiority of the PPSA algorithm in suppressing clutter. [ABSTRACT FROM AUTHOR]

This paper deals with the Dual-Function Radar and Communication (DFRC) signal design for a Multiple-Input–Multiple-Output (MIMO) system, considering the presence of signal-dependent clutter. A modulation methodology called Spectral Position Index and Amplitude (SPIA) modulation is proposed, which involves selecting passband and stopband positions and applying amplitude modulation. Signal to Interference plus Noise Ratio (SINR) is maximized to enhance radar detectability. Meanwhile, variable modulus and communication modulation constraints are enforced to ensure compatibility with the current hardware techniques and communication demand, respectively. In addition, the mainlobe width and sidelobe level constraints used to concentrate energy in a specific area of space are enforced. To tackle the resulting nonconvex and NP-hard optimization problem, an Iterative Block Enhancement (IBE) framework that alternately updates each signal in each emitting antenna is exploited to monotonically increase SINR. Each block involves the Dinkelbach's Iterative Procedure (DIP), Sequential Convex Approximation (SCA) and Alternating Direction Method of Multipliers (ADMM) to obtain a single signal. The computational complexity and convergence of the algorithm are analyzed. Finally, the numerical results highlight the effectiveness of the proposed dual-function scheme in sidelobe signal-dependent clutter. [ABSTRACT FROM AUTHOR]

The problem that this paper is concerned with is High Frequency Surface Wave Radar (HFSWR) detection of desired targets against a complex interference background consisting of sea clutter, ionosphere clutter, Radio Frequency Interference (RFI) and atmospheric noise. Eliminating unwanted echoes and exploring obscured targets contribute to achieving ideal surveillance of sea surface targets. In this paper, a Self-regulating Multi-clutter Suppression Framework (SMSF) has been proposed for small aperture HFSWR. SMSF can remove many types of clutter or RFI; meanwhile, it mines the targets merged into clutter and tracks the travelling path of the ship. In SMSF, a novel Dynamic Threshold Mapping Recognition (DTMR) method is first proposed to reduce the atmospheric noise and recognize each type of unwanted echo; these recognized echoes are fed into the proposed Adaptive Prophase-current Dictionary Learning (APDL) algorithm. To make a comprehensive evaluation, we also designed three novel assessment parameters: Obscured Targets Detection Rate (OTDR), Clutter Purification Rate (CPR) and Erroneous Suppression Rate (ESR). The experiment data collected from a small aperture HFSWR system confirm that SMSF has precise suppression performance over most of the classical algorithms and concurrently reveals the moving targets, and OTDR of SMSF is usually higher than compared methods. [ABSTRACT FROM AUTHOR]

Clutter suppression is a key problem for airborne radar, and space-time adaptive processing (STAP) is a core technology for clutter suppression and moving target detection. However, in practical applications, the non-uniform time-varying environments including clutter range dependence for non-side-looking radar lead to the training samples being unable to satisfy the sample requirements of STAP that they should be independent identical distributed (IID) and that their number should be greater than twice the system's degree of freedom (DOF). The lack of sufficient IID training samples causes difficulty in the convergence of STAP and further results in a serious degeneration of performance. To overcome this problem, this paper proposes a novel autoencoder neural network for clutter suppression with a unique matrix designed to be decoded and encoded. The main challenges are improving the accuracy of the estimation of the clutter-plus-noise covariance matrix (CNCM) for STAP convergence, designing the form of the data input to the network, and making the network successfully explored to the improvement of CNCM. For these challenges, the main proposed solutions include designing a unique matrix with a certain dimension and a series of covariance data selections and matrix transformations. Consequently, the proposed method compresses and retains the characteristics of the covariances, and abandons the deviations caused by the non-uniformity and the deficiency of training samples. Specifically, the proposed method firstly develops a unique matrix whose dimension is less than half of the DOF, meanwhile, it is based on a processing of the selected clutter-plus-noise covariances. Then, an autoencoder neural network with l 2 regularization and the sparsity regularization is proposed for the unique matrix to be decoded and encoded. The training of the proposed autoencoder can be achieved by reducing the total loss function with the gradient descent iterations. Finally, an inverted processing for the autoencoder output is designed for the reconstruct ion of the clutter-plus-noise covariances. Simulation results are used to verify the effectiveness and advantages of the proposed method. It performs obviously superior clutter suppression for both side-looking and non-side-looking radars with strong clutter, and can deal with the insufficient and the non-uniform training samples. For these conditions, the proposed method provides the relatively narrowest and deepest IF notch. Furthermore, on average it improves the improvement factor (IF) by 10 dB more than the ADC, DW, JDL, and original STAP methods. [ABSTRACT FROM AUTHOR]

With the rapid development of cooperative detection technology, target fusion detection with regard of LEO satellites can be realized by means of their diverse observation configurations. However, the existing constant false alarm ratio (CFAR) detection research rarely involves the space-based target fusion detection theory. In this paper, a novel multi-source fusion detection method based on LEO satellites is presented. Firstly, the pre-compensation function is constructed by employing the range and Doppler history of the cell where the antenna beam center is pointed. As a result, not only is the Doppler band broadening problem caused by the high-speed movement of the satellite platform, but the Doppler frequency rate (DFR) offset issue resulted from different observation configurations are alleviated synchronously. Then, the theoretical upper and lower limits of DFR are designed to achieve the effective clutter suppression and the accurate target echo fusion. Finally, the CFAR detection threshold based on the exponential weighted likelihood ratio is derived, which effectively increases the contrast ratio between the target cell and other background cells, and thus to provide an effective multi-source fusion detection method for LEO-based satellite constellation. Simulation results verify the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Ultra-wideband (UWB) impulse radar is widely used for through-wall human respiration detection due to its high range resolution and high penetration capability. UWB impulse radar emits very narrow time pulses, which can directly obtain the impulse response of the target. However, the time interval between successive pulses emitted is not ideally fixed because of timing jitter. This results in the impulse response position of the same target not being fixed, but it is related to slow-time. The clutter scattered by the stationary target becomes non-stationary clutter, which affects the accurate extraction of the human respiration signal. In this paper, we propose a method for reducing timing jitter's impact in through-wall human detection by UWB impulse radar. After the received signal is processed by the Fast Fourier transform (FFT) in slow-time, we model the range-frequency matrix in the frequency domain as a superposition of the low-rank representation of jitter-induced clutter data and the sparse representation of human respiratory data. By only extracting the sparse component, the impact of timing jitter in human respiration detection can be reduced. Both numerical simulated data and experimental data demonstrate that our proposed method can effectively remove non-stationary clutter induced by timing jitter and improve the accuracy of the human target signal extraction. [ABSTRACT FROM AUTHOR]

This paper investigates a robust clutter suppression and detection of ground moving target (GMT) imaging method for a multichannel synthetic aperture radar (MC-SAR) with high-squint angle mounted on hypersonic vehicle (HSV). A modified coarse-focused method with cubic chirp Fourier transform (CFT) is explored first that permits the coarsely focused imageries to be recovered, thus alleviated the impacts of GMT Doppler ambiguity and range cell migration (RCM). After that, in combination with joint-pixel model, a robust clutter suppression method which enhances the GMT integration, and improving the accuracy of radial speed (RS) recovery by modifying the matching between the beamformer center and GMT, is proposed. Due to that the first-order phase compensation and RS retrieval are predigested, the proposed algorithm has lower the algorithmic complexity. Finally, the feasibility of our proposed method are verified via experimental results based on simulated and real measured data. [ABSTRACT FROM AUTHOR]

Robust detection of infrared small target is an important and challenging task in many photoelectric detection systems. Using the difference of a specific feature between the target and the background, various detection methods were proposed in recent decades. However, most methods extract the feature in a region with fixed shape, especially in a rectangular region, which causes a problem: when faced with complex-shape clutters, the rectangular region involves the pixels inside and outside the clutters, and the significant grey-level difference among these pixels leads to a relatively large feature in the clutter area, interfering with the target detection. In this paper, we propose a structure-adaptive clutter suppression method, called chain-growth filtering, for robust infrared small target detection. The well-designed filtering model can adjust its shape to fit various clutter structures such as lines, curves and irregular edges, and thus has a more robust clutter suppression capability than the fixed-shape feature extraction strategy. In addition, the proposed method achieves a considerable anti-noise ability by employing guided filter as a preprocessing approach and enjoys the capability of multi-scale target detection without complex parameter tuning. In the experiment, we evaluate the performance of the detection method through 12 typical infrared scenes which contain different types of clutters. Compared with seven state-of-the-art methods, the proposed method shows the superior clutter-suppression effects for various types of clutters and the excellent detection performance for various scenes. [ABSTRACT FROM AUTHOR]

The nonhomogeneous clutter is a major challenge for ship detection in high-frequency mixed-mode surface wave radar. In this paper, a geometric barycenter-based reduced-dimension space-time adaptive processing method is proposed to suppress the clutter. Given the measured dataset, the range correlation of sea clutter is first investigated. Then, joint domain localized processing is applied to solve the training samples starve scenario in a practical system. The geometric barycenter-based training data selector is presented to select valid training samples and improve the accuracy of the clutter covariance matrix estimation. Finally, the validity of the proposed method is verified using the experimental data and the results show that it outperforms the conventional method in the nonhomogeneous environment of a practical system. [ABSTRACT FROM AUTHOR]

The ground Penetrating Radar (GPR) is a promising remote sensing modality for Antipersonnel Mine (APM) detection. However, detection of the buried APMs are impaired by strong clutter, especially the reflection caused by rough ground surfaces. In this paper, we propose a novel clutter suppression method taking advantage of the low-rank and sparse structure in multidimensional data, based on which an efficient target detection can be accomplished. We firstly created a multidimensional image tensor using sub-band GPR images that are computed from the band-pass filtered GPR signals, such that differences of the target response between sub-bands can be captured. Then, exploiting the low-rank and sparse property of the image tensor, we use the recently proposed Tensor Robust Principal Analysis to remove clutter by decomposing the image tensor into three components: a low-rank component containing clutter, a sparse component capturing target response, and noise. Finally, target detection is accomplished by applying thresholds to the extracted target image. Numerical simulations and experiments with different GPR systems are conducted. The results show that the proposed method effectively improves signal-to-clutter ratio by more than 20 dB and yields satisfactory results with high probability of detection and low false alarm rates. [ABSTRACT FROM AUTHOR]