Search

India as a developing economic power, has to rely much on its energy sector for growth and development. The growth is largely interlinked with the availability of energy and its judicious utilization. Also involved is the question whether the available energy is environmentally acceptable and technically viable. With the growth of country's economy, per capita power consumption has also increased resulting greater demands for power. India's power sector is mainly dependent on conventional or fossil fuels i.e., coal (60.1%) and gas (8.7%) (2015). India has around 10% of the world's coal reserves that will last for about another 30–40 years at the present consumption rate. The use of conventional fossil fuels has a negative impact on the environment due to the emission of harmful greenhouse gases. On the other hand, according to the Ministry of New and Renewable Energy (MNRE), Government of India, the country has untapped source of renewable energies such as, wind, solar power, nuclear energy and biomass. Globally, depletion of conventional fuel resources, is increasingly turning the focus on non-conventional sources of energy. The present paper is a review of biomass energy, its sources and its energy efficiency. Even though sources of biomass fuels are widely available all across India, these are still largely underutilized. According to the available statistics, in India the share of renewable energy has increased from 7.8% to 12.3% during 2012-13 and to 12.95% as on 31st March 2014, this paper also highlights the challenges and advantages of biomass energy over conventional fuels as well as utilization and applicability of biomass in sintering process as a replacement for coke. [ABSTRACT FROM AUTHOR]

With the rising population in India the demand for energy is also shooting up. This paper examines the potential, scope and the opportunities of biomass in the Indian economy. India, being an agricultural country, has a lot of possible resources from the agronomic sector like crop residue, animal manure, etc., which has not been utilised in an efficient way. This paper also gives an insight into anaerobic digestion and the many other digesters implemented in India. The accelerating economic growth leads to the rapid rise in urbanisation which in turn generates an increased production of Municipal Solid Waste (MSW). This MSW can be used in biomass production in quite a lot of innovative ways. The study also focused on the potential sources and their proper conversion technique. The feasibility of biomass conversion and achievements made by India was also looked into. Use of bioenergy in cheaper and economically feasible ways is also a practical solution to the energy crisis. [ABSTRACT FROM AUTHOR]

India has a high potential for technically recoverable biomass, sufficient to meet part of its increasing energy needs, promote energy access in rural and remote areas, create economic opportunities at the national scale, and reduce indoor pollution. Effective utilization of surplus biomass resources is often challenged and hindered by seasonal availability, extensive distribution over vast and distanced areas, and the embedded socio-cultural factors associated with its use. Therefore, the development of reliable maps for the assessment of available/surplus biomass resources is the first key step toward the creation of a new supply chain for cost-effective bioenergy production, particularly in developing countries. In this paper, a new methodological approach that combines primary and secondary data sets, social factors, remote sensing data, and software, such as GIS applications, has been developed. The main goal is to create high-quality, land use/land cover (LULC) maps for agricultural and wastelands in India. With an acceptable level of accuracy assessment, the paper also determines the surplus biomass resources in wastelands and municipal solid waste (MSW) distribution in three Indian states: Madhya Pradesh, Maharashtra, and Tamil Nadu. These states were selected due to the high level of agriculture production and thus high agro-biomass potential, the presence of large industrial agglomerations, and the high interest in bioenergy development in these states. The maps show that the highest surplus biomass from wastelands exists in Madhya Pradesh, while high MSW potentials exist in Maharashtra state. The developed maps considered the existing uses of biomass in order to calculate the surplus biomass resources. The presented maps are a useful tool to optimize the locations of biomass-based and/or co-generation power plants in the surveyed states. [ABSTRACT FROM AUTHOR]

The term “polygeneration” is referred to as “an energy supply system, which delivers more than one form of energy to the final user”, for example: electricity, heating/cooling, desalination can be delivered from polygeneration process. The polygeneration demonstrates unique integration of energy efficiency and renewable energy. It is the next generation energy production technique with a potential to overcome intermittence of renewable energy, reduce cost of power generation and greenhouse gas emissions. The feasibility study of this paper is divided in three sections: In first section of this study, solar and biomass have been arranged to produce steam for power generation. In the second section, cooling is produced by vapor absorption refrigeration (VAR; LiBr-H 2 O) system as per demand load requirement using steam, extracted from pass-out turbine. In the last section of this paper, multi effect dehumidification (MED) water desalination is produced by using limited amount of heat from water vapor (refrigerant; H 2 O) through HE1 of VAR cooling system. [ABSTRACT FROM AUTHOR]

In this communication biomass energy resource, potential, energy conversion and policy for promotion implemented by Government of India are discussed. The total installed capacity for electricity generation in India is 2666.64 GW as on 31st March 2013. Renewable energy is contributed 10.5% of total generation out of which 12.83% power is being generated using biomass. India has surplus agricultural and forest area which comprises about 500 million metric tons of biomass availability per year. In India total biomass power generation capacity is 17,500 MW. At present power being generated is 2665 MW which include 1666 MW by cogeneration. The various category of biomass in India is also discussed in this paper. And the research reveals that India has large potential for bio mass feed stock from different sources. Government of India deployed different policies and executed that the strategies for biomass power generation. Such approaches have included the whole biomass energy sector which incorporated the bio gas, bio diesel etc. in the policies. Government of India has focused on the deployment and development biomass energy sector with strategic policy and program which is notable portion of this review paper. [ABSTRACT FROM AUTHOR]

Electricity generation for rural applications through biomethanation process is very promising in countries like India where availability of biomass feedstock is very high. However, sustainability of biomass power plants requires meticulous planning starting from assessment of feedstock availability to collection, storage, transport and conversion in power plant. All these parameters are spatially inter-linked and therefore use of spatial tools such as GIS is helpful in such planning. This paper investigates electrical power generation potential of a newly constructed biomethanation plant in Sonitpur district of Assam, India. Spatial availability of locally available biomass feedstocks for methane generation is assessed using GIS. The GIS is also used for optimal biomass collection and transportation network design. Altogether, 7 different types of biomass feedstock (kitchen waste, vegetable waste, cow dung, pig droppings, goat droppings, poultry droppings and rice straw) are identified in the surrounding villages of the plant within optimum biomass supply radius. Biomass feedstock of the area can produce 37,000 m 3 methane; sufficient for continuous generation of 5.3 MW electricity. Power supply from the proposed plant would improve rural living standard and key areas such as education and health will be particularly benefited. However, biomass assessment and supply logistics would require managerial attention to minimize cost of power generation. [ABSTRACT FROM AUTHOR]

The utilization of biomass resources for power generation can reduce environmental emissions while fulfilling energy requirements in developing countries. But, the biomass conversion to electric power seems to be financially viable under optimized conditions (for some economic objectives). This paper presents a step-by-step methodology to determine the possibility of installation of straw based power plants in a region. Further, various issues regarding installation of power plants are discussed and reviewed. The study takes into consideration the average fuel distribution, the straw collection mechanism, the plant characteristics and the economic objectives. The methodology has been used for optimal sizing of the straw based plants in Punjab (a north Indian state) for minimum power cost and investment. The optimization models that can handle all possible restrictions for installation of the plants are applied and the results are analyzed under the influence of input parameters. The study indicates that the optimum capacity of plant is of the order of 20 MW, which can produce electricity at a cost of 5 Rs/kW h. Each plant requires a collection radius of 14 km for providing a continuous and sustainable fuel to the plant. The capital cost required for installation of the plant has been estimated to be 45,144 Rs/kW. In order to achieve these objectives, it is essential to integrate the power generation system with the biomass management system. The literature review shows that an efficient biomass recovery system is required to be developed for collection of agricultural straw (within the stipulated time) for implementation of power generation programme in the state. In overall, the study reveals that the efficient utilization of straw for electric power requires careful identification of different techno-economic parameters like biomass management cost, scale factor, fuel supply and thermal efficiency. [ABSTRACT FROM AUTHOR]