Search

Operational amplifiers (Op-Amps) are critical to sensor systems because they enable precise, reliable, and flexible signal processing. Current automated Op-Amp generation methods suffer from extremely low efficiency because the time-consuming SPICE-in-the-loop sizing is normally involved as its inner loop. In this paper, we propose an efficiently automated Op-Amp generation tool using a hybrid sizing method, which combines the merits together from a deterministic optimization algorithm and differential evolution algorithm. Thus, it can not only quickly find a decent local optimum, but also eventually converge to a global optimum. This feature is well fit to be serving as an acute filter in the circuit structure evaluation flow to efficiently eliminate any undesirable circuit structures in advance of detailed sizing. Our experimental results demonstrate its superiority over traditional sizing approaches and show its efficacy in highly boosting the efficiency of automated Op-Amp structure generation. [ABSTRACT FROM AUTHOR]

Sub-Nyquist synthetic aperture radar (SAR) based on pseudo-random time–space modulation has been proposed to increase the swath width while preserving the azimuthal resolution. Due to the sub-Nyquist sampling, the scene can be recovered by an optimization-based algorithm. However, these methods suffer from some issues, e.g., manually tuning difficulty and the pre-definition of optimization parameters, and a low signal–noise ratio (SNR) resistance. To address these issues, a reweighted optimization algorithm, named pseudo-ℒ0-norm optimization algorithm, is proposed for the sub-Nyquist SAR system in this paper. A modified regularization model is first built by applying the scene prior information to nearly acquire the number of nonzero elements based on Bayesian estimation, and then this model is solved by the Cauchy–Newton method. Additionally, an error correction method combined with our proposed pseudo-ℒ0-norm optimization algorithm is also present to eliminate defocusing in the motion-induced model. Finally, experiments with simulated signals and strip-map TerraSAR-X images are carried out to demonstrate the effectiveness and superiority of our proposed algorithm. [ABSTRACT FROM AUTHOR]

The mobile node location method can find unknown nodes in real time and capture the movement trajectory of unknown nodes in time, which has attracted more and more attention from researchers. Due to their advantages of simplicity and efficiency, intelligent optimization algorithms are receiving increasing attention. Compared with other algorithms, the black hole algorithm has fewer parameters and a simple structure, which is more suitable for node location in wireless sensor networks. To address the problems of weak merit-seeking ability and slow convergence of the black hole algorithm, this paper proposed an opposition-based learning black hole (OBH) algorithm and utilized it to improve the accuracy of the mobile wireless sensor network (MWSN) localization. To verify the performance of the proposed algorithm, this paper tests it on the CEC2013 test function set. The results indicate that among the several algorithms tested, the OBH algorithm performed the best. In this paper, several optimization algorithms are applied to the Monte Carlo localization algorithm, and the experimental results show that the OBH algorithm can achieve the best optimization effect in advance. [ABSTRACT FROM AUTHOR]

In an effort to overcome the problem that the traditional stochastic resonance system cannot adjust the structural parameters adaptively in bearing fault-signal detection, this article proposes an adaptive-parameter bearing fault-detection method. First of all, the four strategies of Sobol sequence initialization, exponential convergence factor, adaptive position update, and Cauchy–Gaussian hybrid variation are used to improve the basic grey wolf optimization algorithm, which effectively improves the optimization performance of the algorithm. Then, based on the multistable stochastic resonance model, the structure parameters of the multistable stochastic resonance are optimized through improving the grey wolf algorithm, so as to enhance the fault signal and realize the effective detection of the bearing fault signal. Finally, the proposed bearing fault-detection method is used to analyze and diagnose two open-source bearing data sets, and comparative experiments are conducted with the optimization results of other improved algorithms. Meanwhile, the method proposed in this paper is used to diagnose the fault of the bearing in the lifting device of a single-crystal furnace. The experimental results show that the fault frequency of the inner ring of the first bearing data set diagnosed using the proposed method was 158 Hz, and the fault frequency of the outer ring of the second bearing data set diagnosed using the proposed method was 162 Hz. The fault-diagnosis results of the two bearings were equal to the results derived from the theory. Compared with the optimization results of other improved algorithms, the proposed method has a faster convergence speed and a higher output signal-to-noise ratio. At the same time, the fault frequency of the bearing of the lifting device of the single-crystal furnace was effectively diagnosed as 35 Hz, and the bearing fault signal was effectively detected. [ABSTRACT FROM AUTHOR]

Tungsten heavy alloys (WHAs) are an extremely hard-to-machine material extensively used in demanding applications such as missile liners, aerospace, and optical molds. However, the machining of WHAs remains a challenging task as a result of their high density and elastic stiffness which lead to the deterioration of the machined surface roughness. This paper proposes a brand-new multi-objective dung beetle algorithm. It does not take the cutting parameters (i.e., cutting speed, feed rate, and depth of cut) as the optimization objects but directly optimizes cutting forces and vibration signals monitored using a multi-sensor (i.e., dynamometer and accelerometer). The cutting parameters in the WHA turning process are analyzed through the use of the response surface method (RSM) and the improved dung beetle optimization algorithm. Experimental verification shows that the algorithm has better convergence speed and optimization ability compared with similar algorithms. The optimized forces and vibration are reduced by 9.7% and 46.47%, respectively, and the surface roughness Ra of the machined surface is reduced by 18.2%. The proposed modeling and optimization algorithms are anticipated to be powerful to provide the basis for the parameter optimization in the cutting of WHAs. [ABSTRACT FROM AUTHOR]

The presence of manufacture error in large mirrors introduces high-order aberrations, which can severely influence the intensity distribution of point spread function. Therefore, high-resolution phase diversity wavefront sensing is usually needed. However, high-resolution phase diversity wavefront sensing is restricted with the problem of low efficiency and stagnation. This paper proposes a fast high-resolution phase diversity method with limited memory Broyden–Fletcher–Goldfarb–Shanno (L-BFGS) algorithm, which can accurately detect aberrations in the presence of high-order aberrations. An analytical gradient of the objective function for phase-diversity is integrated into the framework of the L-BFGS nonlinear optimization algorithm. L-BFGS algorithm is specifically suitable for high-resolution wavefront sensing where a large phase matrix is optimized. The performance of phase diversity with L-BFGS is compared to other iterative method through simulations and a real experiment. This work contributes to fast high-resolution image-based wavefront sensing with a high robustness. [ABSTRACT FROM AUTHOR]

Intrusion detection systems (IDS) play a crucial role in securing networks and identifying malicious activity. This is a critical problem in cyber security. In recent years, metaheuristic optimization algorithms and deep learning techniques have been applied to IDS to improve their accuracy and efficiency. Generally, optimization algorithms can be used to boost the performance of IDS models. Deep learning methods, such as convolutional neural networks, have also been used to improve the ability of IDS to detect and classify intrusions. In this paper, we propose a new IDS model based on the combination of deep learning and optimization methods. First, a feature extraction method based on CNNs is developed. Then, a new feature selection method is used based on a modified version of Growth Optimizer (GO), called MGO. We use the Whale Optimization Algorithm (WOA) to boost the search process of the GO. Extensive evaluation and comparisons have been conducted to assess the quality of the suggested method using public datasets of cloud and Internet of Things (IoT) environments. The applied techniques have shown promising results in identifying previously unknown attacks with high accuracy rates. The MGO performed better than several previous methods in all experimental comparisons. [ABSTRACT FROM AUTHOR]

Modal-free optimization algorithms do not require specific mathematical models, and they, along with their other benefits, have great application potential in adaptive optics. In this study, two different algorithms, the single-dimensional perturbation descent algorithm (SDPD) and the second-order stochastic parallel gradient descent algorithm (2SPGD), are proposed for wavefront sensorless adaptive optics, and a theoretical analysis of the algorithms' convergence rates is presented. The results demonstrate that the single-dimensional perturbation descent algorithm outperforms the stochastic parallel gradient descent (SPGD) and 2SPGD algorithms in terms of convergence speed. Then, a 32-unit deformable mirror is constructed as the wavefront corrector, and the SPGD, single-dimensional perturbation descent, and 2SPSA algorithms are used in an adaptive optics numerical simulation model of the wavefront controller. Similarly, a 39-unit deformable mirror is constructed as the wavefront controller, and the SPGD and single-dimensional perturbation descent algorithms are used in an adaptive optics experimental verification device of the wavefront controller. The outcomes demonstrate that the convergence speed of the algorithm developed in this paper is more than twice as fast as that of the SPGD and 2SPGD algorithms, and the convergence accuracy of the algorithm is 4% better than that of the SPGD algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the algorithms for traversal exploration and path coverage of target regions using multiple agents, enabling the efficient deployment of a set of agents to cover a complex region. First, the original multi-agent path planning problem (mCPP) is transformed into several single-agent sub-problems, by dividing the target region into multiple balanced sub-regions, which reduces the explosive combinatorial complexity; subsequently, closed-loop paths are planned in each sub-region by the rapidly exploring random trees (RRT) algorithm to ensure continuous exploration and repeated visits to each node of the target region. On this basis, we also propose two improvements: for the corner case of narrow regions, the use of geodesic distance is proposed to replace the Eulerian distance in Voronoi partitioning, and the iterations for balanced partitioning can be reduced by more than one order of magnitude; the Dijkstra algorithm is introduced to assign a smaller weight to the path cost when the geodesic direction changes, which makes the region division more "cohesive", thus greatly reducing the number of turns in the path and making it more robust. The final optimization algorithm ensures the following characteristics: complete coverage of the target area, wide applicability of multiple area shapes, reasonable distribution of exploration tasks, minimum average waiting time, and sustainable exploration without any preparation phase. [ABSTRACT FROM AUTHOR]

The communication in quarantined areas, e.g., due to the new COVID-19 pandemic, between isolated areas and in areas with technical damage has resulted in a great deal of interest concerning the safety of the population. A new method for ensuring communication between different areas, using unmanned aerial vehicle (UAV) networks with a well-established mobility schedule is proposed. UAVs fly based on a mission plan using regular polygons covering an area from a map. The area is considered to be equidistantly covered with points, grouped in triangles which are further grouped into hexagons. In this paper, UAVs, including battery charging or battery swapping stations and light weight Wi-Fi boards, are used for the data transfer among drones and stations using delivery protocols. UAV network analysis and evaluation (lengths of the arcs in seconds) based on experimental preliminary flight tests are proposed. Multiple simulations are performed based on six DTN algorithms, single-copy, and multiple-copies algorithms, and the efficiency of data transmission (delivery rate and latency) is analyzed. A very good delivery rate of 0.973 is obtained using the newly introduced TD-UAV Dijkstra algorithm. [ABSTRACT FROM AUTHOR]