Search

In substation lightning rod meter reading data taking, the classical object detection model is not suitable for deployment in substation monitoring hardware devices due to its large size, large number of parameters, and slow detection speed, while is difficult to balance detection accuracy and real-time requirements with the existing lightweight object detection model. To address this problem, this paper constructs a lightweight object detection algorithm, YOLOv5-Meter Reading Lighting (YOLOv5-MRL), based on the improved YOLOv5 model's speed while maintaining accuracy. Then, the YOLOv5s are pruned based on the convolutional kernel channel soft pruning algorithm, which greatly reduces the number of parameters in the YOLOv5-MRL model while maintaining a certain accuracy loss. Finally, in order to facilitate the dial reading, the dial external circle fitting method is proposed to calculate the dial reading using the circular angle algorithm. The experimental results on the self-built dataset show that the YOLOv5-MRL object detection model achieves a mean average precision of 96.9%, a detection speed of 5 ms/frame, and a model weight size of 5.5 MB, making it better than other advanced dial reading models. [ABSTRACT FROM AUTHOR]

Ship fire may result in significant damage to its structure and large economic loss. Hence, the prompt identification of fires is essential in order to provide prompt reactions and effective mitigation strategies. However, conventional detection systems exhibit limited efficacy and accuracy in detecting targets, which has been mostly attributed to limitations imposed by distance constraints and the motion of ships. Although the development of deep learning algorithms provides a potential solution, the computational complexity of ship fire detection algorithm pose significant challenges. To solve this, this paper proposes a lightweight ship fire detection algorithm based on YOLOv8n. Initially, a dataset, including more than 4000 unduplicated images and their labels, is established before training. In order to ensure the performance of algorithms, both fire inside ship rooms and also fire on board are considered. Then after tests, YOLOv8n is selected as the model with the best performance and fastest speed from among several advanced object detection algorithms. GhostnetV2-C2F is then inserted in the backbone of the algorithm for long-range attention with inexpensive operation. In addition, spatial and channel reconstruction convolution (SCConv) is used to reduce redundant features with significantly lower complexity and computational costs for real-time ship fire detection. For the neck part, omni-dimensional dynamic convolution is used for the multi-dimensional attention mechanism, which also lowers the parameters. After these improvements, a lighter and more accurate YOLOv8n algorithm, called Ship-Fire Net, was proposed. The proposed method exceeds 0.93, both in precision and recall for fire and smoke detection in ships. In addition, the mAP@0.5 reaches about 0.9. Despite the improvement in accuracy, Ship-Fire Net also has fewer parameters and lower FLOPs compared to the original, which accelerates its detection speed. The FPS of Ship-Fire Net also reaches 286, which is helpful for real-time ship fire monitoring. [ABSTRACT FROM AUTHOR]

This paper proposes a multimodal fusion 3D target detection algorithm based on the attention mechanism to improve the performance of 3D target detection. The algorithm utilizes point cloud data and information from the camera. For image feature extraction, the ResNet50 + FPN architecture extracts features at four levels. Point cloud feature extraction employs the voxel method and FCN to extract point and voxel features. The fusion of image and point cloud features is achieved through regional point fusion and voxel fusion methods. After information fusion, the Coordinate and SimAM attention mechanisms extract fusion features at a deep level. The algorithm's performance is evaluated using the DAIR-V2X dataset. The results show that compared to the Part-A2 algorithm; the proposed algorithm improves the mAP value by 7.9% in the BEV view and 7.8% in the 3D view at IOU = 0.5 (cars) and IOU = 0.25 (pedestrians and cyclists). At IOU = 0.7 (cars) and IOU = 0.5 (pedestrians and cyclists), the mAP value of the SECOND algorithm is improved by 5.4% in the BEV view and 4.3% in the 3D view, compared to other comparison algorithms. [ABSTRACT FROM AUTHOR]

Deep Learning (DL) has provided a significant breakthrough in many areas of research and industry. The development of Convolutional Neural Networks (CNNs) has enabled the improvement of computer vision-based techniques, making the information gathered from cameras more useful. For this reason, recently, studies have been carried out on the use of image-based DL in some areas of people's daily life. In this paper, an object detection-based algorithm is proposed to modify and improve the user experience in relation to the use of cooking appliances. The algorithm can sense common kitchen objects and identify interesting situations for users. Some of these situations are the detection of utensils on lit hobs, recognition of boiling, smoking and oil in kitchenware, and determination of good cookware size adjustment, among others. In addition, the authors have achieved sensor fusion by using a cooker hob with Bluetooth connectivity, so it is possible to automatically interact with it via an external device such as a computer or a mobile phone. Our main contribution focuses on supporting people when they are cooking, controlling heaters, or alerting them with different types of alarms. To the best of our knowledge, this is the first time a YOLO algorithm has been used to control the cooktop by means of visual sensorization. Moreover, this research paper provides a comparison of the detection performance among different YOLO networks. Additionally, a dataset of more than 7500 images has been generated and multiple data augmentation techniques have been compared. The results show that YOLOv5s can successfully detect common kitchen objects with high accuracy and fast speed, and it can be employed for realistic cooking environment applications. Finally, multiple examples of the identification of interesting situations and how we act on the cooktop are presented. [ABSTRACT FROM AUTHOR]

The casting process involves pouring molten metal into a mold cavity. Currently, traditional object detection algorithms exhibit a low accuracy and are rarely used. An object detection model based on deep learning requires a large amount of memory and poses challenges in the deployment and resource allocation for resource limited pouring robots. To address the accurate identification and localization of pouring holes with limited resources, this paper designs a lightweight pouring robot hole detection algorithm named LPO-YOLOv5s, based on YOLOv5s. First, the MobileNetv3 network is introduced as a feature extraction network, to reduce model complexity and the number of parameters. Second, a depthwise separable information fusion module (DSIFM) is designed, and a lightweight operator called CARAFE is employed for feature upsampling, to enhance the feature extraction capability of the network. Finally, a dynamic head (DyHead) is adopted during the network prediction stage, to improve the detection performance. Extensive experiments were conducted on a pouring hole dataset, to evaluate the proposed method. Compared to YOLOv5s, our LPO-YOLOv5s algorithm reduces the parameter size by 45% and decreases computational costs by 55%, while sacrificing only 0.1% of mean average precision (mAP). The model size is only 7.74 MB, fulfilling the deployment requirements for pouring robots. [ABSTRACT FROM AUTHOR]

The counting of surgical instruments is an important task to ensure surgical safety and patient health. However, due to the uncertainty of manual operations, there is a risk of missing or miscounting instruments. Applying computer vision technology to the instrument counting process can not only improve efficiency, but also reduce medical disputes and promote the development of medical informatization. However, during the counting process, surgical instruments may be densely arranged or obstruct each other, and they may be affected by different lighting environments, all of which can affect the accuracy of instrument recognition. In addition, similar instruments may have only minor differences in appearance and shape, which increases the difficulty of identification. To address these issues, this paper improves the YOLOv7x object detection algorithm and applies it to the surgical instrument detection task. First, the RepLK Block module is introduced into the YOLOv7x backbone network, which can increase the effective receptive field and guide the network to learn more shape features. Second, the ODConv structure is introduced into the neck module of the network, which can significantly enhance the feature extraction ability of the basic convolution operation of the CNN and capture more rich contextual information. At the same time, we created the OSI26 data set, which contains 452 images and 26 surgical instruments, for model training and evaluation. The experimental results show that our improved algorithm exhibits higher accuracy and robustness in surgical instrument detection tasks, with F1, AP, AP50, and AP75 reaching 94.7%, 91.5%, 99.1%, and 98.2%, respectively, which are 4.6%, 3.1%, 3.6%, and 3.9% higher than the baseline. Compared to other mainstream object detection algorithms, our method has significant advantages. These results demonstrate that our method can more accurately identify surgical instruments, thereby improving surgical safety and patient health. [ABSTRACT FROM AUTHOR]

At present, the UAV (Unmanned Aerial Vehicle) has been widely used both in civilian and military fields. Most of the current object detection algorithms used to detect UAVs require more parameters, and it is difficult to achieve real-time performance. In order to solve this problem while ensuring a high accuracy rate, we further lighten the model and reduce the number of parameters of the model. This paper proposes an accurate and lightweight UAV detection model based on YOLOv4. To verify the effectiveness of this model, we made a UAV dataset, which contains four types of UAVs and 20,365 images. Through comparative experiments and optimization of existing deep learning and object detection algorithms, we found a lightweight model to achieve an efficient and accurate rapid detection of UAVs. First, from the comparison of the one-stage method and the two-stage method, it is concluded that the one-stage method has better real-time performance and considerable accuracy in detecting UAVs. Then, we further compared the one-stage methods. In particular, for YOLOv4, we replaced MobileNet with its backbone network, modified the feature extraction network, and replaced standard convolution with depth-wise separable convolution, which greatly reduced the parameters and realized 82 FPS and 93.52% mAP while ensuring high accuracy and taking into account the real-time performance. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles (UAVs) are able to guarantee very high spatial and temporal resolution and up-to-date information in order to ensure safety in the direct vicinity of the airport. The current dynamic growth of investment areas in large agglomerations, especially in the neighbourhood of airports, leads to the emergence of objects that may constitute a threat for air traffic. In order to ensure that the obtained spatial data are accurate, it is necessary to understand the detection of atypical aviation obstacles by means of their identification and classification. Quite often, a common feature of atypical aviation obstacles is their elongated shape and irregular cross-section. These factors pose a challenge for modern object detection techniques when the processes used to determine their height are automated. This paper analyses the possibilities for the automated detection of atypical aviation obstacles based on the YOLO algorithm and presents an analysis of the accuracy of the determination of their height based on data obtained from UAV. [ABSTRACT FROM AUTHOR]

With the continuous development of artificial intelligence, embedding object detection algorithms into autonomous underwater detectors for marine garbage cleanup has become an emerging application area. Considering the complexity of the marine environment and the low resolution of the images taken by underwater detectors, this paper proposes an improved algorithm based on Mask R-CNN, with the aim of achieving high accuracy marine garbage detection and instance segmentation. First, the idea of dilated convolution is introduced in the Feature Pyramid Network to enhance feature extraction ability for small objects. Secondly, the spatial-channel attention mechanism is used to make features learn adaptively. It can effectively focus attention on detection objects. Third, the re-scoring branch is added to improve the accuracy of instance segmentation by scoring the predicted masks based on the method of Generalized Intersection over Union. Finally, we train the proposed algorithm in this paper on the Transcan dataset, evaluating its effectiveness by various metrics and comparing it with existing algorithms. The experimental results show that compared to the baseline provided by the Transcan dataset, the algorithm in this paper improves the mAP indexes on the two tasks of garbage detection and instance segmentation by 9.6 and 5.0, respectively, which significantly improves the algorithm performance. Thus, it can be better applied in the marine environment and achieve high precision object detection and instance segmentation. [ABSTRACT FROM AUTHOR]

For facing of the problems caused by the YOLOv4 algorithm's insensitivity to small objects and low detection precision in traffic light detection and recognition, the Improved YOLOv4 algorithm is investigated in the paper using the shallow feature enhancement mechanism and the bounding box uncertainty prediction mechanism. The shallow feature enhancement mechanism is used to extract features from the network and improve the network's ability to locate small objects and color resolution by merging two shallow features at different stages with the high-level semantic features obtained after two rounds of upsampling. Uncertainty is introduced in the bounding box prediction mechanism to improve the reliability of the prediction of the bounding box by modeling the output coordinates of the prediction bounding box and adding the Gaussian model to calculate the uncertainty of the coordinate information. The LISA traffic light data set is used to perform detection and recognition experiments separately. The Improved YOLOv4 algorithm is shown to have a high effectiveness in enhancing the detection and recognition precision of traffic lights. In the detection experiment, the area under the PR curve value of the Improved YOLOv4 algorithm is found to be 97.58%, which represents an increase of 7.09% in comparison to the 90.49% score gained in the Vision for Intelligent Vehicles and Applications Challenge Competition. In the recognition experiment, the mean average precision of the Improved YOLOv4 algorithm is 82.15%, which is 2.86% higher than that of the original YOLOv4 algorithm. The Improved YOLOv4 algorithm shows remarkable advantages as a robust and practical method for use in the real-time detection and recognition of traffic signal lights. [ABSTRACT FROM AUTHOR]

The ever-burgeoning growth of autonomous unmanned aerial vehicles (UAVs) has demonstrated a promising platform for utilization in real-world applications. In particular, a UAV equipped with a vision system could be leveraged for surveillance applications. This paper proposes a learning-based UAV system for achieving autonomous surveillance, in which the UAV can be of assistance in autonomously detecting, tracking, and following a target object without human intervention. Specifically, we adopted the YOLOv4-Tiny algorithm for semantic object detection and then consolidated it with a 3D object pose estimation method and Kalman filter to enhance the perception performance. In addition, UAV path planning for a surveillance maneuver is integrated to complete the fully autonomous system. The perception module is assessed on a quadrotor UAV, while the whole system is validated through flight experiments. The experiment results verified the robustness, effectiveness, and reliability of the autonomous object tracking UAV system in performing surveillance tasks. The source code is released to the research community for future reference. [ABSTRACT FROM AUTHOR]

In terms of small objects in traffic scenes, general object detection algorithms have low detection accuracy, high model complexity, and slow detection speed. To solve the above problems, an improved algorithm (named YOLO-MXANet) is proposed in this paper. Complete-Intersection over Union (CIoU) is utilized to improve loss function for promoting the positioning accuracy of the small object. In order to reduce the complexity of the model, we present a lightweight yet powerful backbone network (named SA-MobileNeXt) that incorporates channel and spatial attention. Our approach can extract expressive features more effectively by applying the Shuffle Channel and Spatial Attention (SCSA) module into the SandGlass Block (SGBlock) module while increasing the parameters by a small number. In addition, the data enhancement method combining Mosaic and Mixup is employed to improve the robustness of the training model. The Multi-scale Feature Enhancement Fusion (MFEF) network is proposed to fuse the extracted features better. In addition, the SiLU activation function is utilized to optimize the Convolution-Batchnorm-Leaky ReLU (CBL) module and the SGBlock module to accelerate the convergence of the model. The ablation experiments on the KITTI dataset show that each improved method is effective. The improved algorithm reduces the complexity and detection speed of the model while improving the object detection accuracy. The comparative experiments on the KITTY dataset and CCTSDB dataset with other algorithms show that our algorithm also has certain advantages. [ABSTRACT FROM AUTHOR]

The detection of objects concealed under people's clothing is a very challenging task, which has crucial applications for security. When testing the human body for metal contraband, the concealed targets are usually small in size and are required to be detected within a few seconds. Focusing on weapon detection, this paper proposes using a real-time detection method for detecting concealed metallic weapons on the human body applied to passive millimeter wave (PMMW) imagery based on the You Only Look Once (YOLO) algorithm, YOLOv3, and a small sample dataset. The experimental results from YOLOv3-13, YOLOv3-53, and Single Shot MultiBox Detector (SSD) algorithm, SSD-VGG16, are compared ultimately, using the same PMMW dataset. For the perspective of detection accuracy, detection speed, and computation resource, it shows that the YOLOv3-53 model had a detection speed of 36 frames per second (FPS) and a mean average precision (mAP) of 95% on a GPU-1080Ti computer, more effective and feasible for the real-time detection of weapon contraband on human body for PMMW images, even with small sample data. [ABSTRACT FROM AUTHOR]