Search

Estimation of temporospatial clinical features of gait (CFs), such as step count and length, step duration, step frequency, gait speed, and distance traveled, is an important component of community-based mobility evaluation using wearable accelerometers. However, accurate unsupervised computerized measurement of CFs of individuals with Duchenne muscular dystrophy (DMD) who have progressive loss of ambulatory mobility is difficult due to differences in patterns and magnitudes of acceleration across their range of attainable gait velocities. This paper proposes a novel calibration method. It aims to detect steps, estimate stride lengths, and determine travel distance. The approach involves a combination of clinical observation, machine-learning-based step detection, and regression-based stride length prediction. The method demonstrates high accuracy in children with DMD and typically developing controls (TDs) regardless of the participant's level of ability. Fifteen children with DMD and fifteen TDs underwent supervised clinical testing across a range of gait speeds using 10 m or 25 m run/walk (10 MRW, 25 MRW), 100 m run/walk (100 MRW), 6-min walk (6 MWT), and free-walk (FW) evaluations while wearing a mobile-phone-based accelerometer at the waist near the body's center of mass. Following calibration by a trained clinical evaluator, CFs were extracted from the accelerometer data using a multi-step machine-learning-based process and the results were compared to ground-truth observation data. Model predictions vs. observed values for step counts, distance traveled, and step length showed a strong correlation (Pearson's r = −0.9929 to 0.9986, p < 0.0001). The estimates demonstrated a mean (SD) percentage error of 1.49% (7.04%) for step counts, 1.18% (9.91%) for distance traveled, and 0.37% (7.52%) for step length compared to ground-truth observations for the combined 6 MWT, 100 MRW, and FW tasks. Our study findings indicate that a single waist-worn accelerometer calibrated to an individual's stride characteristics using our methods accurately measures CFs and estimates travel distances across a common range of gait speeds in both DMD and TD peers. [ABSTRACT FROM AUTHOR]

Activity monitoring has become a necessary demand for weak people to guarantee their safety. The paper proposed a Parallel Training Logical Execution (PTLE) system using machine learning (ML) models on a microelectromechanical system (MEMS) accelerometer to detect coughs, falls, and other normal activities. When there are many categories, the ML prediction can be confused between these activities with each other. The PTLE system trains several models in parallel with more specific activity classes in each dataset. The shared tasks between parallel models relieve the complexity for a single one. There are six additional parameters for accelerometer characteristics, which were calculated from three axes accelerations as input features to improve the ML's consciousness. Once all models were trained, the system was ready to receive the input accelerations and activated the logical flow to manage link operation between these ML models for output predictions. Random Forest (RF) had the highest potential among the ML classification algorithms after the validation. In the experiment, the comparison between the PTLE model and the regular ML model were carried out with real-time data from an M5stickC wearable device on the user's chest to the trained models on PC. The result showed the advancement of the proposed method in term of precision, recall, F1-score with an overall accuracy of 98% in the real-time test. The accelerations from the wearable device were sent to ML models via Wi-Fi with Message Queue Telemetry Transport (MQTT) broker, and the activity predictions were transferred to the cloud for the family members or doctor care based on Internet of Things (IoT) communication. [ABSTRACT FROM AUTHOR]

Wrist-worn sensors have better compliance for activity monitoring compared to hip, waist, ankle or chest positions. However, wrist-worn activity monitoring is challenging due to the wide degree of freedom for the hand movements, as well as similarity of hand movements in different activities such as varying intensities of cycling. To strengthen the ability of wrist-worn sensors in detecting human activities more accurately, motion signals can be complemented by physiological signals such as optical heart rate (HR) based on photoplethysmography. In this paper, an activity monitoring framework using an optical HR sensor and a triaxial wrist-worn accelerometer is presented. We investigated a range of daily life activities including sitting, standing, household activities and stationary cycling with two intensities. A random forest (RF) classifier was exploited to detect these activities based on the wrist motions and optical HR. The highest overall accuracy of 89.6 ± 3.9% was achieved with a forest of a size of 64 trees and 13-s signal segments with 90% overlap. Removing the HR-derived features decreased the classification accuracy of high-intensity cycling by almost 7%, but did not affect the classification accuracies of other activities. A feature reduction utilizing the feature importance scores of RF was also carried out and resulted in a shrunken feature set of only 21 features. The overall accuracy of the classification utilizing the shrunken feature set was 89.4 ± 4.2%, which is almost equivalent to the above-mentioned peak overall accuracy. [ABSTRACT FROM AUTHOR]

Although wearable accelerometers can successfully recognize activities and detect falls, their adoption in real life is low because users do not want to wear additional devices. A possible solution is an accelerometer inside a wrist device/smartwatch. However, wrist placement might perform poorly in terms of accuracy due to frequent random movements of the hand. In this paper we perform a thorough, large-scale evaluation of methods for activity recognition and fall detection on four datasets. On the first two we showed that the left wrist performs better compared to the dominant right one, and also better compared to the elbow and the chest, but worse compared to the ankle, knee and belt. On the third (Opportunity) dataset, our method outperformed the related work, indicating that our feature-preprocessing creates better input data. And finally, on a real-life unlabeled dataset the recognized activities captured the subject's daily rhythm and activities. Our fall-detection method detected all of the fast falls and minimized the false positives, achieving 85% accuracy on the first dataset. Because the other datasets did not contain fall events, only false positives were evaluated, resulting in 9 for the second, 1 for the third and 15 for the real-life dataset (57 days data). [ABSTRACT FROM AUTHOR]

Physical activity recognition using embedded sensors has enabled many context-aware applications in different areas, such as healthcare. Initially, one or more dedicated wearable sensors were used for such applications. However, recently, many researchers started using mobile phones for this purpose, since these ubiquitous devices are equipped with various sensors, ranging from accelerometers to magnetic field sensors. In most of the current studies, sensor data collected for activity recognition are analyzed offline using machine learning tools. However, there is now a trend towards implementing activity recognition systems on these devices in an online manner, since modern mobile phones have become more powerful in terms of available resources, such as CPU, memory and battery. The research on offline activity recognition has been reviewed in several earlier studies in detail. However, work done on online activity recognition is still in its infancy and is yet to be reviewed. In this paper, we review the studies done so far that implement activity recognition systems on mobile phones and use only their on-board sensors. We discuss various aspects of these studies. Moreover, we discuss their limitations and present various recommendations for future research. [ABSTRACT FROM AUTHOR]

A thorough analysis of sports is becoming increasingly important during the training process of badminton players at both the recreational and professional level. Nowadays, game situations are usually filmed and reviewed afterwards in order to analyze the game situation, but these video set-ups tend to be difficult to analyze, expensive, and intrusive to set up. In contrast, we classified badminton movements using off-the-shelf accelerometer and gyroscope data. To this end, we organized a data capturing campaign and designed a novel neural network using different frame sizes as input. This paper shows that with only accelerometer data, our novel convolutional neural network is able to distinguish nine activities with 86% precision when using a sampling frequency of 50 Hz. Adding the gyroscope data causes an increase of up to 99% precision, as compared to, respectively, 79% and 88% when using a traditional convolutional neural network. In addition, our paper analyses the impact of different sensor placement options and discusses the impact of different sampling frequenciess of the sensors. As such, our approach provides a low cost solution that is easy to use and can collect useful information for the analysis of a badminton game. [ABSTRACT FROM AUTHOR]