Search

Estimation of temporospatial clinical features of gait (CFs), such as step count and length, step duration, step frequency, gait speed, and distance traveled, is an important component of community-based mobility evaluation using wearable accelerometers. However, accurate unsupervised computerized measurement of CFs of individuals with Duchenne muscular dystrophy (DMD) who have progressive loss of ambulatory mobility is difficult due to differences in patterns and magnitudes of acceleration across their range of attainable gait velocities. This paper proposes a novel calibration method. It aims to detect steps, estimate stride lengths, and determine travel distance. The approach involves a combination of clinical observation, machine-learning-based step detection, and regression-based stride length prediction. The method demonstrates high accuracy in children with DMD and typically developing controls (TDs) regardless of the participant's level of ability. Fifteen children with DMD and fifteen TDs underwent supervised clinical testing across a range of gait speeds using 10 m or 25 m run/walk (10 MRW, 25 MRW), 100 m run/walk (100 MRW), 6-min walk (6 MWT), and free-walk (FW) evaluations while wearing a mobile-phone-based accelerometer at the waist near the body's center of mass. Following calibration by a trained clinical evaluator, CFs were extracted from the accelerometer data using a multi-step machine-learning-based process and the results were compared to ground-truth observation data. Model predictions vs. observed values for step counts, distance traveled, and step length showed a strong correlation (Pearson's r = −0.9929 to 0.9986, p < 0.0001). The estimates demonstrated a mean (SD) percentage error of 1.49% (7.04%) for step counts, 1.18% (9.91%) for distance traveled, and 0.37% (7.52%) for step length compared to ground-truth observations for the combined 6 MWT, 100 MRW, and FW tasks. Our study findings indicate that a single waist-worn accelerometer calibrated to an individual's stride characteristics using our methods accurately measures CFs and estimates travel distances across a common range of gait speeds in both DMD and TD peers. [ABSTRACT FROM AUTHOR]

The escalating global water usage and the increasing strain on major cities due to water shortages highlights the critical need for efficient water management practices. In water-stressed regions worldwide, significant water wastage is primarily attributed to leakages, inefficient use, and aging infrastructure. Undetected water leakages in buildings' pipelines contribute to the water waste problem. To address this issue, an effective water leak detection method is required. In this paper, we explore the application of edge computing in smart buildings to enhance water management. By integrating sensors and embedded Machine Learning models, known as TinyML, smart water management systems can collect real-time data, analyze it, and make accurate decisions for efficient water utilization. The transition to TinyML enables faster and more cost-effective local decision-making, reducing the dependence on centralized entities. In this work, we propose a solution that can be adapted for effective leakage detection in real-world scenarios with minimum human intervention using TinyML. We follow an approach that is similar to a typical machine learning lifecycle in production, spanning stages including data collection, training, hyperparameter tuning, offline evaluation and model optimization for on-device resource efficiency before deployment. In this work, we considered an existing water leakage acoustic dataset for polyvinyl chloride pipelines. To prepare the acoustic data for analysis, we performed preprocessing to transform it into scalograms. We devised a water leak detection method by applying transfer learning to five distinct Convolutional Neural Network (CNN) variants, which are namely EfficientNet, ResNet, AlexNet, MobileNet V1, and MobileNet V2. The CNN models were found to be able to detect leakages where a maximum testing accuracy, recall, precision, and F1 score of 97.45%, 98.57%, 96.70%, and 97.63%, respectively, were observed using the EfficientNet model. To enable seamless deployment on the Arduino Nano 33 BLE edge device, the EfficientNet model is compressed using quantization resulting in a low inference time of 1932 ms, a peak RAM usage of 255.3 kilobytes, and a flash usage requirement of merely 48.7 kilobytes. [ABSTRACT FROM AUTHOR]

The study of Domain Generalization (DG) has gained considerable momentum in the Machine Learning (ML) field. Human Activity Recognition (HAR) inherently encompasses diverse domains (e.g., users, devices, or datasets), rendering it an ideal testbed for exploring Domain Generalization. Building upon recent work, this paper investigates the application of regularization methods to bridge the generalization gap between traditional models based on handcrafted features and deep neural networks. We apply various regularizers, including sparse training, Mixup, Distributionally Robust Optimization (DRO), and Sharpness-Aware Minimization (SAM), to deep learning models and assess their performance in Out-of-Distribution (OOD) settings across multiple domains using homogenized public datasets. Our results show that Mixup and SAM are the best-performing regularizers. However, they are unable to match the performance of models based on handcrafted features. This suggests that while regularization techniques can improve OOD robustness to some extent, handcrafted features remain superior for domain generalization in HAR tasks. [ABSTRACT FROM AUTHOR]

Activity monitoring has become a necessary demand for weak people to guarantee their safety. The paper proposed a Parallel Training Logical Execution (PTLE) system using machine learning (ML) models on a microelectromechanical system (MEMS) accelerometer to detect coughs, falls, and other normal activities. When there are many categories, the ML prediction can be confused between these activities with each other. The PTLE system trains several models in parallel with more specific activity classes in each dataset. The shared tasks between parallel models relieve the complexity for a single one. There are six additional parameters for accelerometer characteristics, which were calculated from three axes accelerations as input features to improve the ML's consciousness. Once all models were trained, the system was ready to receive the input accelerations and activated the logical flow to manage link operation between these ML models for output predictions. Random Forest (RF) had the highest potential among the ML classification algorithms after the validation. In the experiment, the comparison between the PTLE model and the regular ML model were carried out with real-time data from an M5stickC wearable device on the user's chest to the trained models on PC. The result showed the advancement of the proposed method in term of precision, recall, F1-score with an overall accuracy of 98% in the real-time test. The accelerations from the wearable device were sent to ML models via Wi-Fi with Message Queue Telemetry Transport (MQTT) broker, and the activity predictions were transferred to the cloud for the family members or doctor care based on Internet of Things (IoT) communication. [ABSTRACT FROM AUTHOR]

Wrist-worn sensors have better compliance for activity monitoring compared to hip, waist, ankle or chest positions. However, wrist-worn activity monitoring is challenging due to the wide degree of freedom for the hand movements, as well as similarity of hand movements in different activities such as varying intensities of cycling. To strengthen the ability of wrist-worn sensors in detecting human activities more accurately, motion signals can be complemented by physiological signals such as optical heart rate (HR) based on photoplethysmography. In this paper, an activity monitoring framework using an optical HR sensor and a triaxial wrist-worn accelerometer is presented. We investigated a range of daily life activities including sitting, standing, household activities and stationary cycling with two intensities. A random forest (RF) classifier was exploited to detect these activities based on the wrist motions and optical HR. The highest overall accuracy of 89.6 ± 3.9% was achieved with a forest of a size of 64 trees and 13-s signal segments with 90% overlap. Removing the HR-derived features decreased the classification accuracy of high-intensity cycling by almost 7%, but did not affect the classification accuracies of other activities. A feature reduction utilizing the feature importance scores of RF was also carried out and resulted in a shrunken feature set of only 21 features. The overall accuracy of the classification utilizing the shrunken feature set was 89.4 ± 4.2%, which is almost equivalent to the above-mentioned peak overall accuracy. [ABSTRACT FROM AUTHOR]

Transportation planning and solutions have an enormous impact on city life. To minimize the transport duration, urban planners should understand and elaborate the mobility of a city. Thus, researchers look toward monitoring people's daily activities including transportation types and duration by taking advantage of individual's smartphones. This paper introduces a novel segment-based transport mode detection architecture in order to improve the results of traditional classification algorithms in the literature. The proposed post-processing algorithm, namely the Healing algorithm, aims to correct the misclassification results of machine learning-based solutions. Our real-life test results show that the Healing algorithm could achieve up to 40% improvement of the classification results. As a result, the implemented mobile application could predict eight classes including stationary, walking, car, bus, tram, train, metro and ferry with a success rate of 95% thanks to the proposed multi-tier architecture and Healing algorithm. [ABSTRACT FROM AUTHOR]

Although wearable accelerometers can successfully recognize activities and detect falls, their adoption in real life is low because users do not want to wear additional devices. A possible solution is an accelerometer inside a wrist device/smartwatch. However, wrist placement might perform poorly in terms of accuracy due to frequent random movements of the hand. In this paper we perform a thorough, large-scale evaluation of methods for activity recognition and fall detection on four datasets. On the first two we showed that the left wrist performs better compared to the dominant right one, and also better compared to the elbow and the chest, but worse compared to the ankle, knee and belt. On the third (Opportunity) dataset, our method outperformed the related work, indicating that our feature-preprocessing creates better input data. And finally, on a real-life unlabeled dataset the recognized activities captured the subject's daily rhythm and activities. Our fall-detection method detected all of the fast falls and minimized the false positives, achieving 85% accuracy on the first dataset. Because the other datasets did not contain fall events, only false positives were evaluated, resulting in 9 for the second, 1 for the third and 15 for the real-life dataset (57 days data). [ABSTRACT FROM AUTHOR]

Physical activity recognition using embedded sensors has enabled many context-aware applications in different areas, such as healthcare. Initially, one or more dedicated wearable sensors were used for such applications. However, recently, many researchers started using mobile phones for this purpose, since these ubiquitous devices are equipped with various sensors, ranging from accelerometers to magnetic field sensors. In most of the current studies, sensor data collected for activity recognition are analyzed offline using machine learning tools. However, there is now a trend towards implementing activity recognition systems on these devices in an online manner, since modern mobile phones have become more powerful in terms of available resources, such as CPU, memory and battery. The research on offline activity recognition has been reviewed in several earlier studies in detail. However, work done on online activity recognition is still in its infancy and is yet to be reviewed. In this paper, we review the studies done so far that implement activity recognition systems on mobile phones and use only their on-board sensors. We discuss various aspects of these studies. Moreover, we discuss their limitations and present various recommendations for future research. [ABSTRACT FROM AUTHOR]

A thorough analysis of sports is becoming increasingly important during the training process of badminton players at both the recreational and professional level. Nowadays, game situations are usually filmed and reviewed afterwards in order to analyze the game situation, but these video set-ups tend to be difficult to analyze, expensive, and intrusive to set up. In contrast, we classified badminton movements using off-the-shelf accelerometer and gyroscope data. To this end, we organized a data capturing campaign and designed a novel neural network using different frame sizes as input. This paper shows that with only accelerometer data, our novel convolutional neural network is able to distinguish nine activities with 86% precision when using a sampling frequency of 50 Hz. Adding the gyroscope data causes an increase of up to 99% precision, as compared to, respectively, 79% and 88% when using a traditional convolutional neural network. In addition, our paper analyses the impact of different sensor placement options and discusses the impact of different sampling frequenciess of the sensors. As such, our approach provides a low cost solution that is easy to use and can collect useful information for the analysis of a badminton game. [ABSTRACT FROM AUTHOR]

Coronavirus 2019 (COVID-19) has posed a serious threat to the lives and health of the majority of people worldwide. Since the early days of the outbreak, South Korea's government and citizens have made persistent efforts to provide effective prevention against further spread of the disease. In particular, the participation of individual citizens in complying with the necessary code of conduct to prevent spread of the infection, through measures such as social distancing and mask wearing, is as instrumental as the geographical tracking of the trajectory of the infected. In this paper, we propose an activity recognition method based on a wristband equipped with an IR array and inertial measurement unit (IMU) to detect individual compliance with codes of personal hygiene management, such as mask wearing, which are recommended to prevent the spread of infectious diseases. The results of activity recognition were comparatively analyzed by applying conventional machine learning algorithms and convolutional neural networks (CNNs) to the IMU time series and IR array thermal images collected from 25 subjects. When CNN and 24 × 32 thermal images were used, 97.8% accuracy was achieved (best performance), and when 6 × 8 low-resolution thermal images were used, similar performance with 97.1% accuracy was obtained. In the case of using IMU, the performance of activity recognition was lower than that obtained with the IR array, but an accuracy of 93% was achieved even in the case of applying machine learning algorithms, indicating that it is more suitable for wearable devices with low computational capability. [ABSTRACT FROM AUTHOR]

Existing accelerometer-based human activity recognition (HAR) benchmark datasets that were recorded during free living suffer from non-fixed sensor placement, the usage of only one sensor, and unreliable annotations. We make two contributions in this work. First, we present the publicly available Human Activity Recognition Trondheim dataset (HARTH). Twenty-two participants were recorded for 90 to 120 min during their regular working hours using two three-axial accelerometers, attached to the thigh and lower back, and a chest-mounted camera. Experts annotated the data independently using the camera's video signal and achieved high inter-rater agreement (Fleiss' Kappa = 0.96 ). They labeled twelve activities. The second contribution of this paper is the training of seven different baseline machine learning models for HAR on our dataset. We used a support vector machine, k-nearest neighbor, random forest, extreme gradient boost, convolutional neural network, bidirectional long short-term memory, and convolutional neural network with multi-resolution blocks. The support vector machine achieved the best results with an F1-score of 0.81 (standard deviation: ± 0.18 ), recall of 0.85 ± 0.13 , and precision of 0.79 ± 0.22 in a leave-one-subject-out cross-validation. Our highly professional recordings and annotations provide a promising benchmark dataset for researchers to develop innovative machine learning approaches for precise HAR in free living. [ABSTRACT FROM AUTHOR]