Search

The non-axisymmetric exciting guided wave can detect the thinning section of the elbow, and the time domain energy value of the signal collected at the outer arch position of the receiving end displays a downward trend as the remaining thickness of the erosion area decreases. To address the difficulty in detecting the erosion degree of the elbow with high accuracy, this paper uses the linear frequency modulation (LFM) signal to excite a non-axisymmetric guided wave that propagates in the 90° elbow and collects signals through four PZT receivers. To predict the erosion degree, the corresponding relationship between the energy value of the four signals after fractional Fourier filtering and the degree of elbow erosion is established through the particle swarm optimization (PSO)–least squares support vector machine (LSSVM) algorithm. The results show that the method proposed has an average accuracy rate of 98.1864%, 94.7167%, 99.119%, and 99.9593% for predicting the erosion degree of four elbow samples, and 94.0039%. and 81.2976% for two new erosion degrees, which are higher than the nonlinear regression model, LSSVM algorithm, and BP neural network algorithm. This study has guiding significance for real-time monitoring of elbow erosion. [ABSTRACT FROM AUTHOR]

Due to subjectivity in refereeing, the results of race walking are often questioned. To overcome this limitation, artificial-intelligence-based technologies have demonstrated their potential. The paper aims at presenting WARNING, an inertial-based wearable sensor integrated with a support vector machine algorithm to automatically identify race-walking faults. Two WARNING sensors were used to gather the 3D linear acceleration related to the shanks of ten expert race-walkers. Participants were asked to perform a race circuit following three race-walking conditions: legal, illegal with loss-of-contact and illegal with knee-bent. Thirteen machine learning algorithms, belonging to the decision tree, support vector machine and k-nearest neighbor categories, were evaluated. An inter-athlete training procedure was applied. Algorithm performance was evaluated in terms of overall accuracy, F1 score and G-index, as well as by computing the prediction speed. The quadratic support vector was confirmed to be the best-performing classifier, achieving an accuracy above 90% with a prediction speed of 29,000 observations/s when considering data from both shanks. A significant reduction of the performance was assessed when considering only one lower limb side. The outcomes allow us to affirm the potential of WARNING to be used as a referee assistant in race-walking competitions and during training sessions. [ABSTRACT FROM AUTHOR]

Defocus is an important factor that causes image quality degradation of optoelectronic tracking equipment in the shooting range. In this paper, an improved blind/referenceless image spatial quality evaluator (BRISQUE) algorithm is formulated by using the image characteristic extraction technology to obtain a characteristic vector (CV). The CV consists of 36 characteristic values that can effectively reflect the defocusing condition of the corresponding image. The image is evaluated and scored subjectively by the human eyes. The subjective evaluation scores and CVs constitute a set of training data samples for the defocusing evaluation model. An image database that contains sufficiently many training samples is constructed. The training model is trained to obtain the support vector machine (SVM) model by using the regression function of the SVM. In the experiments, the BRISQUE algorithm is used to obtain the image feature vector. The method of establishing the image definition evaluation model via SVM is feasible and yields higher subjective and objective consistency. [ABSTRACT FROM AUTHOR]

The failure of insulators may seriously threaten the safe operation of the power system, where the state detection of high-voltage insulators is a must for the normal and safe operation of the power system. Based on the data of insulators in aerial images, this work explored an enhanced particle swarm algorithm to optimize the parameters of the support vector machine. A support vector machine model was therefore established for the identification of the normal and defective states of the insulators. This methodology works with the structure minimization principle of SVM and the characteristics of particle swarm fast optimization. First, the aerial insulator image was segmented as a target by way of the seed region growth based on double-layer cascade morphological improvements, and then, HOG features plus GLCM features were extracted as sample data. Finally, an ameliorated PSO-SVM classifier was designed to realize insulator state identification. Comparisons were made between PSO-SVM and conventional machine learning algorithms, SVM and Random Forest, and an optimization algorithm, Gray Wolf Optimization Support Vector Machine (GWO-SVM), and advanced neural network CNN. The experimental results showed that the performance of the algorithm proposed in this paper touched the top level, where the recognition accuracy rate was 92.11%, the precision rate 90%, the recall rate 94.74%, and the F1-score 92.31%. [ABSTRACT FROM AUTHOR]

A novel approach for multichannel epilepsy seizure classification which will help to automatically locate seizure activity present in the focal brain region was proposed. This paper suggested an Internet of Things (IoT) framework based on a smart phone by utilizing a novel feature termed multiresolution critical spectral verge (MCSV), based on frequency-derived information for epileptic seizure classification which was optimized using a flower pollination algorithm (FPA). A wireless sensor technology (WSN) was utilized to record the electroencephalography (EEG) signal of epileptic patients. Next, the EEG signal was pre-processed utilizing a multiresolution-based adaptive filtering (MRAF) method. Then, the maximal frequency point at which the power spectral density (PSD) of each EEG segment was greater than the average spectral power of the corresponding frequency band was computed. This point was further optimized to extract a point termed as critical spectral verge (CSV) to extract the exact high frequency oscillations representing the actual seizure activity present in the EEG signal. Next, a support vector machine (SVM) classifier was used for channel-wise classification of the seizure and non-seizure regions using CSV as a feature. This process of classification using the CSV feature extracted from the MRAF output is referred to as the MCSV approach. As a final step, cloud-based services were employed to analyze the EEG information from the subject's smart phone. An exhaustive analysis was undertaken to assess the performance of the MCSV approach for two datasets. The presented approach showed an improved performance with a 93.83% average sensitivity, a 97.94% average specificity, a 97.38% average accuracy with the SVM classifier, and a 95.89% average detection rate as compared with other state-of-the-art studies such as deep learning. The methods presented in the literature were unable to precisely localize the origination of the seizure activity in the brain region and reported a low seizure detection rate. This work introduced an optimized CSV feature which was effectively used for multichannel seizure classification and localization of seizure origination. The proposed MCSV approach will help diagnose epileptic behavior from multichannel EEG signals which will be extremely useful for neuro-experts to analyze seizure details from different regions of the brain. [ABSTRACT FROM AUTHOR]

This paper presents two novel swarm intelligence algorithms for gene selection, HHO-SVM and HHO-KNN. Both of these algorithms are based on Harris Hawks Optimization (HHO), one in conjunction with support vector machines (SVM) and the other in conjunction with k-nearest neighbors (k-NN). In both algorithms, the goal is to determine a small gene subset that can be used to classify samples with a high degree of accuracy. The proposed algorithms are divided into two phases. To obtain an accurate gene set and to deal with the challenge of high-dimensional data, the redundancy analysis and relevance calculation are conducted in the first phase. To solve the gene selection problem, the second phase applies SVM and k-NN with leave-one-out cross-validation. A performance evaluation was performed on six microarray data sets using the two proposed algorithms. A comparison of the two proposed algorithms with several known algorithms indicates that both of them perform quite well in terms of classification accuracy and the number of selected genes. [ABSTRACT FROM AUTHOR]

Dynamic measurement error correction is an effective way to improve sensor precision. Dynamic measurement error prediction is an important part of error correction, and support vector machine (SVM) is often used for predicting the dynamic measurement errors of sensors. Traditionally, the SVM parameters were always set manually, which cannot ensure the model's performance. In this paper, a SVM method based on an improved particle swarm optimization (NAPSO) is proposed to predict the dynamic measurement errors of sensors. Natural selection and simulated annealing are added in the PSO to raise the ability to avoid local optima. To verify the performance of NAPSO-SVM, three types of algorithms are selected to optimize the SVM's parameters: the particle swarm optimization algorithm (PSO), the improved PSO optimization algorithm (NAPSO), and the glowworm swarm optimization (GSO). The dynamic measurement error data of two sensors are applied as the test data. The root mean squared error and mean absolute percentage error are employed to evaluate the prediction models' performances. The experimental results show that among the three tested algorithms the NAPSO-SVM method has a better prediction precision and a less prediction errors, and it is an effective method for predicting the dynamic measurement errors of sensors. [ABSTRACT FROM AUTHOR]

Early damage detection is critical for a large set of global ageing infrastructure. Structural Health Monitoring systems provide a sensor-based quantitative and objective approach to continuously monitor these structures, as opposed to traditional engineering visual inspection. Analysing these sensed data is one of the major Structural Health Monitoring (SHM) challenges. This paper presents a novel algorithm to detect and assess damage in structures such as bridges. This method applies tensor analysis for data fusion and feature extraction, and further uses one-class support vector machine on this feature to detect anomalies, i.e., structural damage. To evaluate this approach, we collected acceleration data from a sensor-based SHM system, which we deployed on a real bridge and on a laboratory specimen. The results show that our tensor method outperforms a state-of-the-art approach using the wavelet energy spectrum of the measured data. In the specimen case, our approach succeeded in detecting 92.5% of induced damage cases, as opposed to 61.1% for the wavelet-based approach. While our method was applied to bridges, its algorithm and computation can be used on other structures or sensor-data analysis problems, which involve large series of correlated data from multiple sensors. [ABSTRACT FROM AUTHOR]

The algorithm and the results of a nonlinear detector using a machine learning technique called support vector machine (SVM) on an efficient modulation system with high data rate and low energy consumption is presented in this paper. Simulation results showed that the performance achieved by the SVM detector is comparable to that of a conventional threshold decision (TD) detector. The two detectors detect the received signals together with the special impacting filter (SIF) that can improve the energy utilization efficiency. However, unlike the TD detector, the SVM detector concentrates not only on reducing the BER of the detector, but also on providing accurate posterior probability estimates (PPEs), which can be used as soft-inputs of the LDPC decoder. The complexity of this detector is considered in this paper by using four features and simplifying the decision function. In addition, a bandwidth efficient transmission is analyzed with both SVM and TD detector. The SVM detector is more robust to sampling rate than TD detector. We find that the SVM is suitable for extended binary phase shift keying (EBPSK) signal detection and can provide accurate posterior probability for LDPC decoding. [ABSTRACT FROM AUTHOR]

To address the problem of image texture feature extraction, a direction measure statistic that is based on the directionality of image texture is constructed, and a new method of texture feature extraction, which is based on the direction measure and a gray level co-occurrence matrix (GLCM) fusion algorithm, is proposed in this paper. This method applies the GLCM to extract the texture feature value of an image and integrates the weight factor that is introduced by the direction measure to obtain the final texture feature of an image. A set of classification experiments for the high-resolution remote sensing images were performed by using support vector machine (SVM) classifier with the direction measure and gray level co-occurrence matrix fusion algorithm. Both qualitative and quantitative approaches were applied to assess the classification results. The experimental results demonstrated that texture feature extraction based on the fusion algorithm achieved a better image recognition, and the accuracy of classification based on this method has been significantly improved. [ABSTRACT FROM AUTHOR]

In this paper, we present human pose estimation and gesture recognition algorithms that use only depth information. The proposed methods are designed to be operated with only a CPU (central processing unit), so that the algorithm can be operated on a low-cost platform, such as an embedded board. The human pose estimation method is based on an SVM (support vector machine) and superpixels without prior knowledge of a human body model. In the gesture recognition method, gestures are recognized from the pose information of a human body. To recognize gestures regardless of motion speed, the proposed method utilizes the keyframe extraction method. Gesture recognition is performed by comparing input keyframes with keyframes in registered gestures. The gesture yielding the smallest comparison error is chosen as a recognized gesture. To prevent recognition of gestures when a person performs a gesture that is not registered, we derive the maximum allowable comparison errors by comparing each registered gesture with the other gestures. We evaluated our method using a dataset that we generated. The experiment results show that our method performs fairly well and is applicable in real environments. [ABSTRACT FROM AUTHOR]

During the processing and planting of soybeans, it is greatly significant that a reliable, rapid, and accurate technique is used to detect soybean varieties. Traditional chemical analysis methods of soybean variety sampling (e.g., mass spectrometry and high-performance liquid chromatography) are destructive and time-consuming. In this paper, a robust and accurate method for nondestructive soybean classification is developed through hyperspectral imaging and ensemble machine learning algorithms. Image acquisition, preprocessing, and feature selection are used to obtain different types of soybean hyperspectral features. Based on these features, one of ensemble classifiers-random subspace linear discriminant (RSLD) algorithm is used to classify soybean seeds. Compared with the linear discrimination (LD) and linear support vector machine (LSVM) methods, the results show that the RSLD algorithm in this paper is more stable and reliable. In classifying soybeans in 10, 15, 20, and 25 categories, the RSLD method achieves the highest classification accuracy. When 155 features are used to classify 15 types of soybeans, the classification accuracy of the RSLD method reaches 99.2%, while the classification accuracies of the LD and LSVM methods are only 98.6% and 69.7%, respectively. Therefore, the ensemble classification algorithm RSLD can maintain high classification accuracy when different types and different classification features are used. [ABSTRACT FROM AUTHOR]

The preceding vehicles detection technique in nighttime traffic scenes is an important part of the advanced driver assistance system (ADAS). This paper proposes a region tracking-based vehicle detection algorithm via the image processing technique. First, the brightness of the taillights during nighttime is used as the typical feature, and we use the existing global detection algorithm to detect and pair the taillights. When the vehicle is detected, a time series analysis model is introduced to predict vehicle positions and the possible region (PR) of the vehicle in the next frame. Then, the vehicle is only detected in the PR. This could reduce the detection time and avoid the false pairing between the bright spots in the PR and the bright spots out of the PR. Additionally, we present a thresholds updating method to make the thresholds adaptive. Finally, experimental studies are provided to demonstrate the application and substantiate the superiority of the proposed algorithm. The results show that the proposed algorithm can simultaneously reduce both the false negative detection rate and the false positive detection rate. [ABSTRACT FROM AUTHOR]

Wireless Sensors Networks have been the focus of significant attention from research and development due to their applications of collecting data from various fields such as smart cities, power grids, transportation systems, medical sectors, military, and rural areas. Accurate and reliable measurements for insightful data analysis and decision-making are the ultimate goals of sensor networks for critical domains. However, the raw data collected by WSNs usually are not reliable and inaccurate due to the imperfect nature of WSNs. Identifying misbehaviours or anomalies in the network is important for providing reliable and secure functioning of the network. However, due to resource constraints, a lightweight detection scheme is a major design challenge in sensor networks. This paper aims at designing and developing a lightweight anomaly detection scheme to improve efficiency in terms of reducing the computational complexity and communication and improving memory utilization overhead while maintaining high accuracy. To achieve this aim, one-class learning and dimension reduction concepts were used in the design. The One-Class Support Vector Machine (OCSVM) with hyper-ellipsoid variance was used for anomaly detection due to its advantage in classifying unlabelled and multivariate data. Various One-Class Support Vector Machine formulations have been investigated and Centred-Ellipsoid has been adopted in this study due to its effectiveness. Centred-Ellipsoid is the most effective kernel among studies formulations. To decrease the computational complexity and improve memory utilization, the dimensions of the data were reduced using the Candid Covariance-Free Incremental Principal Component Analysis (CCIPCA) algorithm. Extensive experiments were conducted to evaluate the proposed lightweight anomaly detection scheme. Results in terms of detection accuracy, memory utilization, computational complexity, and communication overhead show that the proposed scheme is effective and efficient compared few existing schemes evaluated. The proposed anomaly detection scheme achieved the accuracy higher than 98%, with O (nd) memory utilization and no communication overhead. [ABSTRACT FROM AUTHOR]

The problems that the key biomass variables in Pichia pastoris fermentation process are difficult measure in real time; this paper mainly proposes a multi-model soft sensor modeling method based on the piecewise affine (PWA) modeling method, which is optimized by particle swarm optimization (PSO) with an improved compression factor (ICF). Firstly, the false nearest neighbor method was used to determine the order of the PWA model. Secondly, the ICF-PSO algorithm was proposed to cooperatively optimize the number of PWA models and the parameters of each local model. Finally, a least squares support vector machine was adopted to determine the scope of action of each local model. Simulation results show that the proposed ICF-PSO-PWA multi-model soft sensor modeling method accurately approximated the nonlinear features of Pichia pastoris fermentation, and the model prediction accuracy is improved by 4.4884% compared with the weighted least squares vector regression model optimized by PSO. [ABSTRACT FROM AUTHOR]

For permanent magnet DC motors (PMDCMs), the amplitude of the current signals gradually decreases after the motor starts. Only using the signal features of current in a single segment is not conducive to fault diagnosis for PMDCMs. In this work, multi-segment feature extraction is presented for improving the effect of fault diagnosis of PMDCMs. Additionally, a support vector machine (SVM), a classification and regression tree (CART), and the k-nearest neighbor algorithm (k-NN) are utilized for the construction of fault diagnosis models. The time domain features extracted from several successive segments of current signals make up a feature vector, which is adopted for fault diagnosis of PMDCMs. Experimental results show that multi-segment features have a better diagnostic effect than single-segment features; the average accuracy of fault diagnosis improves by 19.88%. This paper lays the foundation of fault diagnosis for PMDCMs through multi-segment feature extraction and provides a novel method for feature extraction. [ABSTRACT FROM AUTHOR]

Iris biometric detection provides contactless authentication, preventing the spread of COVID-19-like contagious diseases. However, these systems are prone to spoofing attacks attempted with the help of contact lenses, replayed video, and print attacks, making them vulnerable and unsafe. This paper proposes the iris liveness detection (ILD) method to mitigate spoofing attacks, taking global-level features of Thepade's sorted block truncation coding (TSBTC) and local-level features of the gray-level co-occurrence matrix (GLCM) of the iris image. Thepade's SBTC extracts global color texture content as features, and GLCM extracts local fine-texture details. The fusion of global and local content presentation may help distinguish between live and non-live iris samples. The fusion of Thepade's SBTC with GLCM features is considered in experimental validations of the proposed method. The features are used to train nine assorted machine learning classifiers, including naïve Bayes (NB), decision tree (J48), support vector machine (SVM), random forest (RF), multilayer perceptron (MLP), and ensembles (SVM + RF + NB, SVM + RF + RT, RF + SVM + MLP, J48 + RF + MLP) for ILD. Accuracy, precision, recall, and F-measure are used to evaluate the performance of the projected ILD variants. The experimentation was carried out on four standard benchmark datasets, and our proposed model showed improved results with the feature fusion approach. The proposed fusion approach gave 99.68% accuracy using the RF + J48 + MLP ensemble of classifiers, immediately followed by the RF algorithm, which gave 95.57%. The better capability of iris liveness detection will improve human–computer interaction and security in the cyber-physical space by improving person validation. [ABSTRACT FROM AUTHOR]

In a health management system, prognostics, which is an engineering discipline that predicts a system's future health, is an important aspect yet there is currently limited research in this field. In this paper, a hybrid approach for prognostics is proposed. The approach combines the least squares support vector regression (LSSVR) with the hidden Markov model (HMM). Features extracted from sensor signals are used to train HMMs, which represent different health levels. A LSSVR algorithm is used to predict the feature trends. The LSSVR training and prediction algorithms are modified by adding new data and deleting old data and the probabilities of the predicted features for each HMM are calculated based on forward or backward algorithms. Based on these probabilities, one can determine a system's future health state and estimate the remaining useful life (RUL). To evaluate the proposed approach, a test was carried out using bearing vibration signals. Simulation results show that the LSSVR/HMM approach can forecast faults long before they occur and can predict the RUL. Therefore, the LSSVR/HMM approach is very promising in the field of prognostics. [ABSTRACT FROM AUTHOR]

Abstract: In the cognitive radio system, spectrum sensing for detecting the presence of primary users in a licensed spectrum is a fundamental problem. Energy detection is the most popular spectrum sensing scheme used to differentiate the case where the primary user's signal is present from the case where there is only noise. In fact, the nature of spectrum sensing can be taken as a binary classification problem, and energy detection is a linear classifier. If the signal-to-noise ratio (SNR) of the received signal is low, and the number of received signal samples for sensing is small, the binary classification problem is linearly inseparable. In this situation the performance of energy detection will decrease seriously. In this paper, a novel approach for obtaining a nonlinear threshold based on support vector machine with particle swarm optimization (PSO-SVM) to replace the linear threshold used in traditional energy detection is proposed. Simulations demonstrate that the performance of the proposed algorithm is much better than that of traditional energy detection. [ABSTRACT FROM AUTHOR]

Over the last two decades, multiple classifier system (MCS) or classifier ensemble has shown great potential to improve the accuracy and reliability of remote sensing image classification. Although there are lots of literatures covering the MCS approaches, there is a lack of a comprehensive literature review which presents an overall architecture of the basic principles and trends behind the design of remote sensing classifier ensemble. Therefore, in order to give a reference point for MCS approaches, this paper attempts to explicitly review the remote sensing implementations of MCS and proposes some modified approaches. The effectiveness of existing and improved algorithms are analyzed and evaluated by multi-source remotely sensed images, including high spatial resolution image (QuickBird), hyperspectral image (OMISII) and multi-spectral image (Landsat ETM+). Experimental results demonstrate that MCS can effectively improve the accuracy and stability of remote sensing image classification, and diversity measures play an active role for the combination of multiple classifiers. Furthermore, this survey provides a roadmap to guide future research, algorithm enhancement and facilitate knowledge accumulation of MCS in remote sensing community. [ABSTRACT FROM AUTHOR]

This paper provides a comparative study on the different techniques of classifying human leg motions that are performed using two low-cost uniaxial piezoelectric gyroscopes worn on the leg. A number of feature sets, extracted from the raw inertial sensor data in different ways, are used in the classification process. The classification techniques implemented and compared in this study are: Bayesian decision making (BDM), a rule-based algorithm (RBA) or decision tree, least-squares method (LSM), k-nearest neighbor algorithm (k-NN), dynamic time warping (DTW), support vector machines (SVM), and artificial neural networks (ANN). A performance comparison of these classification techniques is provided in terms of their correct differentiation rates, confusion matrices, computational cost, and training and storage requirements. Three different cross-validation techniques are employed to validate the classifiers. The results indicate that BDM, in general, results in the highest correct classification rate with relatively small computational cost. [ABSTRACT FROM AUTHOR]

In machine learning and data science, feature selection is considered as a crucial step of data preprocessing. When we directly apply the raw data for classification or clustering purposes, sometimes we observe that the learning algorithms do not perform well. One possible reason for this is the presence of redundant, noisy, and non-informative features or attributes in the datasets. Hence, feature selection methods are used to identify the subset of relevant features that can maximize the model performance. Moreover, due to reduction in feature dimension, both training time and storage required by the model can be reduced as well. In this paper, we present a tri-stage wrapper-filter-based feature selection framework for the purpose of medical report-based disease detection. In the first stage, an ensemble was formed by four filter methods—Mutual Information, ReliefF, Chi Square, and Xvariance—and then each feature from the union set was assessed by three classification algorithms—support vector machine, naïve Bayes, and k-nearest neighbors—and an average accuracy was calculated. The features with higher accuracy were selected to obtain a preliminary subset of optimal features. In the second stage, Pearson correlation was used to discard highly correlated features. In these two stages, XGBoost classification algorithm was applied to obtain the most contributing features that, in turn, provide the best optimal subset. Then, in the final stage, we fed the obtained feature subset to a meta-heuristic algorithm, called whale optimization algorithm, in order to further reduce the feature set and to achieve higher accuracy. We evaluated the proposed feature selection framework on four publicly available disease datasets taken from the UCI machine learning repository, namely, arrhythmia, leukemia, DLBCL, and prostate cancer. Our obtained results confirm that the proposed method can perform better than many state-of-the-art methods and can detect important features as well. Less features ensure less medical tests for correct diagnosis, thus saving both time and cost. [ABSTRACT FROM AUTHOR]

In this paper, we present a WiFi-based intrusion detection system called Wi-Alarm. Motivated by our observations and analysis that raw channel state information (CSI) of WiFi is sensitive enough to monitor human motion, Wi-Alarm omits data preprocessing. The mean and variance of the amplitudes of raw CSI data are used for feature extraction. Then, a support vector machine (SVM) algorithm is applied to determine detection results. We prototype Wi-Alarm on commercial WiFi devices and evaluate it in a typical indoor scenario. Results show that Wi-Alarm reduces much computational expense without losing accuracy and robustness. Moreover, different influence factors are also discussed in this paper. [ABSTRACT FROM AUTHOR]

Falls are seriously threatening the health of elderly. In order to reduce the potential danger caused by falls, this paper proposes a two-stage fall recognition algorithm based on human posture features. For preprocessing, we construct the new key features: deflection angles and spine ratio to describe the changes of human posture based on the human skeleton extracted by OpenPose. In the first stage, based on the variables: tendency symbol and steady symbol integrated by the scattered key features, we divide the human body state into three states: stable state, fluctuating state, and disordered state. By analyzing whether the body is in a stable state, the ADL (activities of daily living) actions with high stability can be preliminarily excluded. In the second stage: to further identify the confusing ADL actions and the fall actions, we innovatively design a time-continuous recognition algorithm. When human body is constantly in an unstable state, the human posture features: compare value γ , energy value ε , state score τ are proposed to form a feature vector, and support vector machine (SVM), K nearest neighbors (KNN), decision tree (DT), random forest (RF) are utilized for classification. Experiment results demonstrate that SVM with linear kernel function can distinguish falling actions best and our approach achieved a detection accuracy of 97.34%, precision of 98.50%, and the recall, F1 score are 97.33%, 97.91% respectively. Compared with previous state-of-art algorithms, our algorithm can achieve the highest recognition accuracy. It proves that our fall detection method is effective. [ABSTRACT FROM AUTHOR]

Weight is an important indicator of the growth and development of dairy cows. The traditional static weighing methods require considerable human and financial resources, and the existing dynamic weighing algorithms do not consider the influence of the cow motion state on the weight curve. In this paper, a dynamic weighing algorithm for cows based on a support vector machine (SVM) and empirical wavelet transform (EWT) is proposed for classification and analysis. First, the dynamic weight curve is obtained by using a weighing device placed along a cow travel corridor. Next, the data are preprocessed through valid signal acquisition, feature extraction, and normalization, and the results are divided into three active degrees during motion for low, medium, and high grade using the SVM algorithm. Finally, a mean filtering algorithm, the EWT algorithm, and a combined periodic continuation-EWT algorithm are used to obtain the dynamic weight values. Weight data were collected for 910 cows, and the experimental results displayed a classification accuracy of 98.6928%. The three algorithms were used to calculate the dynamic weight values for comparison with real values, and the average error rates were 0.1838%, 0.6724%, and 0.9462%. This method can be widely used at farms and expand the current knowledgebase regarding the dynamic weighing of cows. [ABSTRACT FROM AUTHOR]

Due to the spectral complexity and high dimensionality of hyperspectral images (HSIs), the processing of HSIs is susceptible to the curse of dimensionality. In addition, the classification results of ground truth are not ideal. To overcome the problem of the curse of dimensionality and improve classification accuracy, an improved spatial–spectral weight manifold embedding (ISS-WME) algorithm, which is based on hyperspectral data with their own manifold structure and local neighbors, is proposed in this study. The manifold structure was constructed using the structural weight matrix and the distance weight matrix. The structural weight matrix was composed of within-class and between-class coefficient representation matrices. These matrices were obtained by using the collaborative representation method. Furthermore, the distance weight matrix integrated the spatial and spectral information of HSIs. The ISS-WME algorithm describes the whole structure of the data by the weight matrix constructed by combining the within-class and between-class matrices and the spatial–spectral information of HSIs, and the nearest neighbor samples of the data are retained without changing when embedding to the low-dimensional space. To verify the classification effect of the ISS-WME algorithm, three classical data sets, namely Indian Pines, Pavia University, and Salinas scene, were subjected to experiments for this paper. Six methods of dimensionality reduction (DR) were used for comparison experiments using different classifiers such as k-nearest neighbor (KNN) and support vector machine (SVM). The experimental results show that the ISS-WME algorithm can represent the HSI structure better than other methods, and effectively improves the classification accuracy of HSIs. [ABSTRACT FROM AUTHOR]

This paper proposes a solution for events classification from a sole noisy mixture that consist of two major steps: a sound-event separation and a sound-event classification. The traditional complex nonnegative matrix factorization (CMF) is extended by cooperation with the optimal adaptive L1 sparsity to decompose a noisy single-channel mixture. The proposed adaptive L1 sparsity CMF algorithm encodes the spectra pattern and estimates the phase of the original signals in time-frequency representation. Their features enhance the temporal decomposition process efficiently. The support vector machine (SVM) based one versus one (OvsO) strategy was applied with a mean supervector to categorize the demixed sound into the matching sound-event class. The first step of the multi-class MSVM method is to segment the separated signal into blocks by sliding demixed signals, then encoding the three features of each block. Mel frequency cepstral coefficients, short-time energy, and short-time zero-crossing rate are learned with multi sound-event classes by the SVM based OvsO method. The mean supervector is encoded from the obtained features. The proposed method has been evaluated with both separation and classification scenarios using real-world single recorded signals and compared with the state-of-the-art separation method. Experimental results confirmed that the proposed method outperformed the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

People with sleep apnea (SA) are at increased risk of having stroke and cardiovascular diseases. Polysomnography (PSG) is used to detect SA. This paper conducts feature selection from PSG signals and uses a support vector machine (SVM) to detect SA. To analyze SA, the Physionet Apnea Database was used to obtain various features. Electrocardiography (ECG), oxygen saturation (SaO2), airflow, abdominal, and thoracic signals were used to provide various frequency-, time-domain and non-linear features (n = 87). To analyse the significance of these features, firstly, two evaluation measures, the rank-sum method and the analysis of variance (ANOVA) were used to evaluate the significance of the features. These features were then classified according to their significance. Finally, different class feature sets were presented as inputs for an SVM classifier to detect the onset of SA. The hill-climbing feature selection algorithm and the k-fold cross-validation method were applied to evaluate each classification performance. Through the experiments, we discovered that the best feature set (including the top-five significant features) obtained the best classification performance. Furthermore, we plotted receiver operating characteristic (ROC) curves to examine the performance of the SVM, and the results showed the SVM with Linear kernel (regularization parameter = 1) outperformed other classifiers (area under curve = 95.23%, sensitivity = 94.29%, specificity = 96.17%). The results confirm that feature subsets based on multiple bio-signals have the potential to identify patients with SA. The use of a smaller subset avoids dimensionality problems and reduces the computational load. [ABSTRACT FROM AUTHOR]

The recognition of non-line-of-sight (NLOS) state is a prerequisite for alleviating NLOS errors and is crucial to ensure the accuracy of positioning. Recent studies only identify the line-of-sight (LOS) state and the NLOS state, but ignore the contribution of occlusion categories to spatial information perception. This paper proposes a bidirectional search algorithm based on maximum correlation, minimum redundancy, and minimum computational cost (BS-mRMRMC). The optimal channel impulse response (CIR) feature set, which can identify NLOS and LOS states well, as well as the blocking categories, are determined by setting the constraint thresholds of both the maximum evaluation index, and the computational cost. The identification of blocking categories provides more effective information for the indoor space perception of ultra-wide band (UWB). Based on the vector projection method, the hierarchical structure of decision tree support vector machine (DT-SVM) is designed to verify the recognition accuracy of each category. Experiments show that the proposed algorithm has an average recognition accuracy of 96.7% for each occlusion category, which is better than those of the other three algorithms based on the same number of CIR signal characteristics of UWB. [ABSTRACT FROM AUTHOR]

Recognition of motor imagery intention is one of the hot current research focuses of brain-computer interface (BCI) studies. It can help patients with physical dyskinesia to convey their movement intentions. In recent years, breakthroughs have been made in the research on recognition of motor imagery task using deep learning, but if the important features related to motor imagery are ignored, it may lead to a decline in the recognition performance of the algorithm. This paper proposes a new deep multi-view feature learning method for the classification task of motor imagery electroencephalogram (EEG) signals. In order to obtain more representative motor imagery features in EEG signals, we introduced a multi-view feature representation based on the characteristics of EEG signals and the differences between different features. Different feature extraction methods were used to respectively extract the time domain, frequency domain, time-frequency domain and spatial features of EEG signals, so as to made them cooperate and complement. Then, the deep restricted Boltzmann machine (RBM) network improved by t-distributed stochastic neighbor embedding(t-SNE) was adopted to learn the multi-view features of EEG signals, so that the algorithm removed the feature redundancy while took into account the global characteristics in the multi-view feature sequence, reduced the dimension of the multi-visual features and enhanced the recognizability of the features. Finally, support vector machine (SVM) was chosen to classify deep multi-view features. Applying our proposed method to the BCI competition IV 2a dataset we obtained excellent classification results. The results show that the deep multi-view feature learning method further improved the classification accuracy of motor imagery tasks. [ABSTRACT FROM AUTHOR]

With the large-scale deployment of smart meters worldwide, research in non-intrusive load monitoring (NILM) has seen a significant rise due to its dual use of real-time monitoring of end-user appliances and user-centric feedback of power consumption usage. NILM is a technique for estimating the state and the power consumption of an individual appliance in a consumer's premise using a single point of measurement device such as a smart meter. Although there are several existing NILM techniques, there is no meaningful and accurate metric to evaluate these NILM techniques for multi-state devices such as the fridge, heat pump, etc. In this paper, we demonstrate the inadequacy of the existing metrics and propose a new metric that combines both event classification and energy estimation of an operational state to give a more realistic and accurate evaluation of the performance of the existing NILM techniques. In particular, we use unsupervised clustering techniques to identify the operational states of the device from a labeled dataset to compute a penalty threshold for predictions that are too far away from the ground truth. Our work includes experimental evaluation of the state-of-the-art NILM techniques on widely used datasets of power consumption data measured in a real-world environment. [ABSTRACT FROM AUTHOR]

As restricted resources have seriously limited the computational performance of massive Internet of things (IoT) devices, better processing capability is urgently required. As an innovative technology, multi-access edge computing can provide cloudlet capabilities by offloading computation-intensive services from devices to a nearby edge server. This paper proposes an intelligent rapid adaptive offloading (IRAO) algorithm for a dynamic IoT system to increase overall computational performance and simultaneously keep the fairness of multiple participants, which can achieve agile centralized control and solve the joint optimization problems related to offloading policy and resource allocation. For reducing algorithm execution time, we apply machine learning methods and construct an adaptive learning-based framework consisting of offloading decision-making, radio resource slicing and algorithm parameters updating. In particular, the offloading policy can be rapidly derived from an estimation algorithm based on a deep neural network, which uses an experience replay training method to improve model accuracy and adopts an asynchronous sampling trick to enhance training convergence performance. Extensive simulations with different parameters are conducted to maintain the trade-off between accuracy and efficiency of the IRAO algorithm. Compared with other candidates, the results illustrate that the IRAO algorithm can achieve superior performance in terms of scalability, effectiveness and efficiency. [ABSTRACT FROM AUTHOR]

The work presented in this paper is focused on the use of spectroscopy to identify the type of tissue of human brain samples employing support vector machine classifiers. Two different spectrometers were used to acquire infrared spectroscopic signatures in the wavenumber range between 1200–3500 cm−1. An extensive analysis was performed to find the optimal configuration for a support vector machine classifier and determine the most relevant regions of the spectra for this particular application. The results demonstrate that the developed algorithm is robust enough to classify the infrared spectroscopic data of human brain tissue at three different discrimination levels. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) are often deployed in harsh and unattended environments, which may cause the generation of abnormal or low quality data. The inaccurate and unreliable sensor data may increase generation of false alarms and erroneous decisions, so it's very important to detect outliers in sensor data efficiently and accurately to ensure sound scientific decision-making. In this paper, an outlier detection algorithm (TSVDD) using model selection-based support vector data description (SVDD) is proposed. Firstly, the Toeplitz matrix random feature mapping is used to reduce the time and space complexity of outlier detection. Secondly, a novel model selection strategy is realized to keep the algorithm stable under the low feature dimensions, this strategy can select a relatively optimal decision model and avoid both under-fitting and overfitting phenomena. The simulation results on SensorScope and IBRL datasets demonstrate that, TSVDD achieves higher accuracy and lower time complexity for outlier detection in WSNs compared with existing methods. [ABSTRACT FROM AUTHOR]