Search

Transverse synchronization of vertical displacements of all jacking-up points is an important monitoring indicator to replace bearings in assembled multigirder bridges during the jacking phase. Currently, using target paper to identify the 3D coordinates of control points reduces the complexity of monitoring operations and improves the stability of data precision. However, the existing planar target locating methods have low accuracy, inefficiency, and subjectivity, which seriously hinders the construction process of bearing replacement. Accurately obtaining the center coordinates of multiple targets from a point cloud in a short monitoring period remains a challenge. This study proposes a high-precision automated algorithm to extract target center points in low-density point clouds to quickly calculate real target center points. First, we construct a standard point cloud model of the target papers for scanning, including color and geometric features. Then, we extract the measured point cloud of the typical jacking operation phase based on the reflection intensity and size information. Next, we map the intensity values of the measured point cloud into the color channel and register the measured point cloud with its standard point cloud model using the normal vector estimation and colored ICP algorithms. Finally, we extract the center point of the measured targets. Numerical experiments and engineering test results show that the proposed method converges quickly with high precision and good robustness, which saves 91.4% of the time compared with the traditional method. In general, this research can provide effective technical support for 3D laser scanning in monitoring the operation phase of bridge jacking. [ABSTRACT FROM AUTHOR]

Cables are important components of long-span bridge structures, whose operation is significantly affected by cable force changes. Nowadays, cable force testing is performed by physical methods; that is, sensors are installed on the cable structure to monitor its force changes. Obviously, this strategy requires an extensive amount of time to achieve cable force calculation, which makes it impossible to monitor the force of the cable structure in real time. Meanwhile, smartphones have attracted extensive attention in the field of structural health monitoring (SHM) because of their higher cost-effectiveness than accelerometers, which include price and lifespan. Besides, many people own a smartphone, which leads to the possibility of a wider range of applications. Therefore, this paper presents a framework for the rapid estimation of the cable force of long-span bridges based on smartphones-captured video and a template matching algorithm. First, the empirical mode decomposition (EMD) method with wavelet decomposition (WD) method, that is, the EMDWD model, is constructed to extract the vibration signal of the bridge cable by eliminating the effects of smartphone vibration and environmental noise on the measured dynamic displacement, thus effectively improving the accuracy of data processing. In addition, the vibration identification model of bridge cable based on a template matching algorithm is established, and the deformation curve of cable is obtained. Finally, the frequency of bridge suspender is calculated by the Fourier transform method (FFT), and the cable force is estimated based on the smartphone-captured video. [ABSTRACT FROM AUTHOR]

Summary: In this paper, a novel distance‐based slicing (DBS) algorithm is proposed for the visualization of inclusion defects within a thick solid structure. The algorithm is based on the propagation distance traveled by the ultrasonic wave signals and was integrated with the generation laser scanning ultrasonic propagation imaging (UPI) system in which the fixed sensor was positioned to detect the induced through‐the‐thickness ultrasonic signals. The advantages provided by the UPI system allow for an in‐situ non‐destructive evaluation for real world applications. An investigation of an isotropic solid specimen of large thickness with multiple internal inclusion defects of different shapes and depth location was performed using the proposed algorithm and system. The results in the form of ultrasonic propagation freeze frames show that the algorithm is much more effective in detecting each individual defect and is particularly useful for a thick‐walled specimen. Additionally, a relationship was determined between the visualized result of each defect and the source position during data acquisition which enabled us to estimate the depth location of the defect within the specimen. [ABSTRACT FROM AUTHOR]

Summary: Rapid health assessment of essential buildings such as hospitals, fire stations, and large residential complexes is crucial after damaging earthquakes. The use of advanced technologies such as wireless sensors, learning algorithms, and signal processing methods became more attractive in such fast applications due to their higher reliabilities and efficiencies compared to the conventional visual inspection methods. This paper presents a robust post‐earthquake damage detection framework for predicting the extent and location of damage occurrence in the braced‐frame structures after an earthquake. To do so, features derived from acceleration response of the structure were used along with a classification learner to determine the health condition of the structure. Decision tree classifiers are used for the purpose of damage classification where the Bayesian optimization algorithm is implemented to optimize the architecture of the mentioned classifier. A one‐story chevron steel‐braced frame, a three‐story X‐braced steel‐frame, and a five‐story three‐dimensional building are considered to validate the proposed method. The total number of 3774 and 1887 nonlinear response history analyses were respectively performed for 2D and 3D numerical models under scaled SAC motions, using the OpenSees simulation platform. Furthermore, in order to simulate the field condition, a maximum level of 10% white Gaussian noise is added to the output signals. Results obtained from the three case studies show that the proposed framework is robust and reliable in predicting the extent of damage level in the braced‐frame structures in a short time after an earthquake. [ABSTRACT FROM AUTHOR]