Search

: In view of the unclear understanding of the basic scientific problems such as the rheological mechanism of seed cotton, especially the lack of research on the creep characteristics of seed cotton, the machine-harvested seed cotton in the Xinjiang region was taken as the research object to find out the compression creep characteristics. The universal material testing machine was used to carry out a one-factor creep test, taking moisture content, feed quality, compression times, and trash content as test factors and instantaneous elastic modulus, hysteretic elastic modulus, viscosity coefficient, and delay time as test indicators. The ANOVA and correlation were analyzed by SPSS, and the creep process of the seed cotton was simulated by ADAMS. Results show that moisture content significantly affects the instantaneous elastic modulus, hysteretic elastic modulus, and viscosity coefficient (p<0.01). In addition, each value of which decreases with the increase in moisture content. Feed quality significantly affects the hysteretic elastic modulus and viscosity coefficient (p<0.05). Moreover, the hysteretic elastic modulus and viscosity coefficient increase with the increase in feed quality. The compression times significantly influence the instantaneous elastic modulus, hysteretic elastic modulus, and viscosity coefficient (p<0.01), each value of which increases with the increase of compression times. Furthermore, the trash content significantly influenced the hysteretic elastic modulus and viscosity coefficient (p<0.05). The absolute error between the simulated and experimental values ek is within -0.011-0.030 mm, and the relative error φk is less than 7%. The experimental results can provide theoretical and data support for the study of rheological characteristics of machine-harvested seed cotton, the design of seed cotton packing devices, and the molding quality of cotton bale (mold). [ABSTRACT FROM AUTHOR]

Land use and land cover changes (LUCC) are thought to be amongst the most important impacts exerted by humans on climate. However, relatively little research has been carried out so far on the effects of LUCC on extreme climate change other than on regional temperatures and precipitation. In this paper, we apply a regional weather research and forecasting (WRF) climate model using LUCC data from Heilongjiang Province, that was collected between the 1900s and 2010s, to explore how changes in forest cover influence extreme temperature indexes. Our selection of extreme high, low, and daily temperature indexes for analysis in this study enables the calculation of a five-year numerical integration trail with changing forest space. Results indicate that the total forested area of Heilongjiang Province decreased by 28% between the 1900s and 2010s. This decrease is most marked in the western, southwestern, and northeastern parts of the province. Our results also reveal a remarkable correlation between change in forested area and extreme high and low temperature indexes. Further analysis enabled us to determine that the key factor explaining increases in extreme high temperature indexes (i.e., calculated using the number of warm days, warm nights, as well as tropical nights, and summer days) is decreasing forest area; data also showed that this factor caused a decrease in extreme low temperature indexes (i.e., calculated using the number of cold days and cold nights, as well as frost days, and ice days) and an increase in the maximum value of daily minimum temperature. Spatial data demonstrated that there is a significant correlation between forest-to-farmland conversion and extreme temperature indexes throughout most of our study period. Spatial data demonstrated that there is a significant correlation between forest-to-farmland conversion and extreme temperature indexes throughout most of our study period. Positive correlations are also present between decreasing forest area, the more frequent occurrence of extreme high temperature events, and a rise in the maximum value of daily minimum temperature. At the same time, we found clear negative correlations between decreasing forest area and less frequent occurrence of extreme low temperature events. [ABSTRACT FROM AUTHOR]

Amodified seed growth routewas developed to fabricate theAu nanocrystalswith high-density tips based on kinetically-controlled growth via adjusting the adding rate of Au seeds into growth solution. The obtained Au nanostructures were chestnut-like in morphology and about 100 nm in size. They were built of the radial [111]-oriented nanoneedles andwere 30-50 nmin length. Therewere about 120-150 tips in each nanocrystal. The formation of chestnut-like Au nanocrystals is ascribed to surfactant-induced preferential growth of seeds along direction [111]. Importantly, the chestnut-like Au configuration displayed powerful surface enhanced Raman scattering (SERS) performance (enhance factor > 107), owing to the high density of tips. Further, such film was used as a SERS substrate for the detection of lindane (γ -666) molecules (the typical organochlorine pesticide). The detection limit was about 10 ppb, and the relationship between SERS intensity I and concentration C of 666 accords with the double logarithm linear. This work presents a simple approach to Au nanocrystal with high-density tips, and provides a highly efficacious SERS-substrate for quantitative and trace recognition of toxic chlorinated pesticides. [ABSTRACT FROM AUTHOR]

Male infertility accounts for almost half of infertility cases worldwide. A subset of infertile men exhibit reduced testosterone and enhanced levels of estradiol (E2), though it is unclear how increased E2 promotes deterioration of male fertility. Here, we utilized a transgenic mouse strain that overexpresses human CYP19, which encodes aromatase (AROM+ mice), and mice with knockout of Esr1, encoding estrogen receptor α (ERαKO mice), to analyze interactions between viable Leydig cells (LCs) and testicular macrophages that may lead to male infertility. In AROM+ males, enhanced E2 promoted LC hyperplasia and macrophage activation via ERα signaling. E2 stimulated LCs to produce growth arrest--specific 6 (GAS6), which mediates phagocytosis of apoptotic cells by bridging cells with surface exposed phosphatidylserine (PS) to macrophage receptors, including the tyrosine kinases TYRO3, AXL, and MER. Overproduction of E2 increased apoptosis-independent extrusion of PS on LCs, which in turn promoted engulfment by E2/ERα-activated macrophages that was mediated by AXL-GAS6-PS interaction. We further confirmed E2-dependant engulfment of LCs by real-time 3D imaging. Furthermore, evaluation of molecular markers in the testes of patients with nonobstructive azoospermia (NOA) revealed enhanced expression of CYP19, GAS6, and AXL, which suggests that the AROM+ mouse model reflects human infertility. Together, these results suggest that GAS6 has a potential as a clinical biomarker and therapeutic target for male infertility. [ABSTRACT FROM AUTHOR]

Objective: The objective of this study was to investigate the safety and pharmacokinetics of edaravone administered by single or successive intravenous infusions in healthy Chinese volunteers. Methods: A total of 30 subjects (15 males and 15 females) were recruited and randomly assigned to three groups receiving edaravone doses of 20, 30, and 60 mg. All subjects received a single dose of edaravone during a 30-minute period, and only the 30mg dose group continued to receive the same dose successively by intravenous infusion twice daily for the next 5 days. Plasma concentrations of edaravone were monitored by high-performance liquid chromatography at the following times: 15, 30, 45, 60, 75, 105, 165, 225, 300, 390, 480, 600, and 720 minutes after edaravone administration. Results: The area under the plasma concentration-time curve during a dosage interval (AUCτ) values of the single dose in the 20, 30, and 60 mg dose groups were 3.64 ± 1.37, 5.17 ± 0.93, and 11.25 ± 3.42 mg · h/L, respectively, while in the group receiving repeated dosing of 30mg, the mean AUCτ value was 5.06 ± 0.89mg · h/L. The corresponding maximum plasma drug concentration (Cmax) values were 1599.0 ± 382.6, 2378.7 ± 316.7, and 4540.1 ± 901.1 ng/mL, respectively, in the single-dose groups, and 2479.1 ± 477.9 ng/mL in the 30mg repeated-dose group. The mean AUCτ and Cmax ratios between the repeated-dose group and the single-dose groups were 0.98 and 1.04. All laboratory test abnormalities (including increased alanine transaminase and triacylglycerol levels, and decreased white blood cell counts and creatinine levels) were mild and tolerable. All abnormal blood biochemical indices returned to normal levels after 7 days. Conclusion: Edaravone was safe and well tolerated in the volunteers and displayed linear increases in the Cmax and AUCτ values. [ABSTRACT FROM AUTHOR]

Background: Bencycloquidium bromide (BCQB) is a novel, potent and selective muscarinic M1/M3 receptor antagonist under development for the treatment of rhinorrhea in rhinitis. The pharmacokinetics and safety of BCQB in animals have been established in preclinical studies. However, no clinical pharmacokinetic data are available for BCQB in humans. Objective: The aim of this first-in-human study was to evaluate the pharmacokinetics, safety and tolerability of BCQB following single and multiple intranasal doses in healthy Chinese subjects. Methods: The clinical trial was comprised of the following four studies: (i) an open-label, single-dose escalation study to evaluate the safety and tolerability in healthy subjects after intranasal doses of BCQB ranging from 45 to 450 μg (total of six doses); (ii) an open-label, multiple-dose escalation study to assess the safety and tolerability in healthy subjects after intranasal administration with 120 and 150 μg doses of BCQB (360 and 450 μg/day) administered three times daily for 15 days; (iii) a randomized, open-label and parallel-group design to evaluate the single-dose pharmacokinetics of BCQB after intranasal dosing (45, 90, and 180 μg); and (iv) ten subjects received 120 μg of BCQB by intranasal administration, three times daily for 5 days with a final single dose on day 7 to assess its multiple-dose pharmacokinetics. Safety and tolerability of BCQB were evaluated by monitoring adverse events (AEs), ECG recordings, vital signs and clinical laboratory parameters. The pharmacokinetic parameters for BCQB were calculated by software using noncompartmental methods. Results: All AEs were mild, of limited duration and no more frequent at higher doses. There was no serious adverse event, death or withdrawal. No clinically significant change was noted in clinical laboratory parameters, cardiac parameters or vital signs. Following single intranasal dosing, BCQB was rapidly absorbed with a median time to maximum concentration (tmax) of 8 minutes for 45, 90, and 180 μg dose groups; the plasma concentration of BCQB decreased in a biphasic manner with the mean half-life (t½) of 8.5 hours; the maximum concentration (Cmax) and area under the plasma concentration-time curve (AUC) of BCQB increased linearly across the examined dose range of 45-180 μg. During the multiple dosing, the steady state was achieved within 3 days of 120 mg three times daily dosing of BCQB. A slightly greater AUC was observed after 5 days of multiple dosing, with the mean accumulation ratio of 1.26; however, the half-life was unchanged. Conclusion: BCQB was safe and well tolerated in healthy Chinese subjects when administered intranasally with single and multiple doses across the doses studied. The mean Cmax and AUC increased proportionally to the studied doses, and the steady state was achieved within 3 days after three times daily dosing. A slight accumulation of BCQB following multiple dosing was observed. The pharmacokinetics, safety and tolerability profiles of BCQB pose it as a good candidate for further development in the treatment of rhinorrhea in rhinitis. [ABSTRACT FROM AUTHOR]