Search

In this paper, it is proposed to apply the mayfly optimization algorithm (MOA) to perform the coordinated and simultaneous tuning of the parameters of supplementary damping controllers, i.e., power system stabilizer (PSS) and power oscillation damping (POD), that actuate together with the automatic voltage regulators of the synchronous generators and the static synchronous series compensator (SSSC), respectively, for damping low-frequency oscillations in power systems. The performance of the MOA is compared with the performances of the genetic algorithm (GA) and particle swarm optimization (PSO) algorithm for solving this problem. The dynamics of the power system is represented using the current sensitivity model, and, because of that, a current injections model is proposed for the SSSC, which uses proportional-integral (PI) controllers and the residues of the current injections at the buses, obtained from the Newton–Raphson method. Tests were carried out using the New England system and the two-area symmetrical system. Both static and dynamic analyses of the operation of the SSSC were performed. To validate the proposed optimization techniques, two sets of tests were conducted: first, with the purpose of verifying the performance of the most effective algorithm for tuning the parameters of PSSs, PI, and POD controllers, and second, with the purpose of performing studies focused on small-signal stability. The results have validated the current injections model for the SSSC, as well as have indicated the superior performance of the MOA for solving the problem, accrediting it as a powerful tool for small-signal stability studies in power systems. [ABSTRACT FROM AUTHOR]

The continual increase in the power network topological structure and long distances between load‐generation sources lead to modern powers systems are operated near theirs stability margins. For this issue, reliable and secure operations of electric devices through inter‐area oscillations remain an essential issue in the system dynamic stability. In the case of improper actions of controlling devices, the severe inter‐area interactions may lead to wide‐area instabilities and large blackouts. Using wide‐area measurement system (WAMS), remote signals are transferred through communications links with different inherent time latencies. In the case of large time delays, the main controllers cannot work appropriately which leads to improper performance of damping controllers through severe inter‐area fault event scenarios. For this issue, this paper presents an adaptive wide‐area damping controller (AWADC) for damping inter‐area oscillations in large power systems equipped with WAMS technology consisting of various time latencies. In this case, based on the IEEE C37.118.1 protocol, the generator buses are equipped with phasor measurement unit devices. Also, owing to the different communication links, the measured global signals (GSs) are involved within different time latencies. In this case, at each time window, considering time delay compensator (TDC) technology provided through Simevents discrete event tool, the overall time delay is evaluated and compensated. For identifying the best controlling GSs, considering two observability and controllability concepts, the system dynamic signals are evaluated which the best input decisioning signals and corresponding output controlling signals are provided. The proposed AWADC scheme consists of different compensating blocks which are adjusted through simple and well‐known Jaya optimization algorithm (JOA) through online evaluations. The structure of the proposed AWADC controlling scheme is carried out on a modified 39‐bus New England test system consisting of large synchronous generators whose damping performances are evaluated through severe fault events with the potential of unstable inter‐area oscillations. Simulation results indicate the effectiveness of developed TDC and JOA techniques to provide proper controlling signals through the AWADC controller in the presence of different time latencies. [ABSTRACT FROM AUTHOR]

• To propose sooty-tern optimization (STO) for designing PSS parameters of multi-machine power system. • The performance of STO is evaluated using eigenvalue analysis, simulation results and performance indices. • The results are matched with other powerful optimization techniques. • Robustness is verified on hidden operating cases also under critical disturbances. This paper reports a comparative study among four bio-inspired meta-heuristic techniques i.e. Sooty-Tern Optimization (STO), Grey Wolf Optimization (GWO), Genetic Algorithm (GA), and Particle Swarm Optimization (PSO) to tune the robust Power System Stabilizer (PSS) parameters of the multi-machine power system. These approaches are successfully tested on two bench-mark systems: sixteen-machine, sixty-eight-bus New England Extended Power Grid (NEEPG) and three-machine, nine-bus Western System Coordinating Council (WSCC). The efficacy of planned PSS via STO and GWO is validated by extensive non-linear simulations, eigenvalue analysis, and performance indices for numerous operating conditions under decisive perturbations, and outcomes are matched with those of GA and PSO techniques. In addition, the robustness is also tested for these algorithms. The results indicate that the PSS design using STO and GWO improves the small-signal stability and damping performance for mitigating inter-area and local area modes of low-frequency oscillations compared to GA and PSO. [ABSTRACT FROM AUTHOR]

Summary: An improved whale optimization algorithm (IWOA) for the design of a robust power system stabilizer (PSS) for the multi‐machine power system is developed in this paper. Tuning of PSS parameters using the proposed IWOA is carried out by minimizing a multi‐objective function comprising the damping ratio and damping factor of lightly damped oscillating modes of all the generators. The advantage of considering the objective function is that the lightly damped and undamped oscillating modes of all the generators can shift to a prespecified zone of the s‐plane. The performance of the proposed IWOA is tested on standard benchmark test functions and compared with familiar optimization algorithms. The efficacy of the proposed design technique is tested on three benchmark test systems: three‐generator nine‐bus system, two‐area four‐machine interconnected system, and the New England 10‐generator 39‐bus system working on various operating conditions under several typical disturbances. The potential of the proposed method is demonstrated through eigenvalue analysis. The proposed IWOA‐based PSS is compared with the other stabilizers to show its efficacy. [ABSTRACT FROM AUTHOR]

Short-term probabilistic load forecasting is essential to power systems management and optimization of power flows across transmission networks. Developing forecasting tools capable of providing accurate predictions must comply with their practical implementation in short-term operations, mainly in terms of fast computing and high efficiency. Many data-driven forecasting solutions are often unnecessarily verbose, thus making their practical value limited. This problem occurs more frequently when multiple loads have to be predicted simultaneously, as in power transmission system analysis and optimization. In this paper, we propose a new cooperative forecasting system that refines probabilistic forecasts of individual loads online. The refining procedure is based on a multivariate quantile regression, which is dynamically applied to the individual forecasts as new observations become available. The proposal is validated on the load data published by ISO New England for eight regions, covering six states of the United States. The quality of probabilistic forecasts is assessed in terms of reliability and sharpness, comparing the results to three benchmarks. The proposed method outperforms the best benchmark by up to 6% w.r.t. the reduction in pinball loss. [ABSTRACT FROM AUTHOR]