Search

Temporal hierarchies have been widely used during the past few years as they are capable to provide more accurate coherent forecasts at different planning horizons. However, they still display some limitations, being mainly subject to the forecasting methods used for generating the base forecasts and the particularities of the examined series. This paper deals with such limitations by considering three different strategies: (i) combining forecasts of multiple methods, (ii) applying bias adjustments and (iii) selectively implementing temporal hierarchies to avoid seasonal shrinkage. The proposed strategies can be applied either separately or simultaneously, being complements to the method considered for reconciling the base forecasts and completely independent from each other. Their effect is evaluated using the monthly series of the M and M3 competitions. The results are very promising, displaying lots of potential for improving the performance of temporal hierarchies, both in terms of accuracy and bias. [ABSTRACT FROM AUTHOR]

The DEM generalization is the basis of multi-dimensional observation, the basis of expressing and analyzing the terrain. DEM is also the core of building the Multi-Scale Geographic Database. Thus, many researchers have studied both the theory and the method of DEM generalization. This paper proposed a new method of generalizing terrain, which extracts feature points based on the tree model construction which considering the nested relationship of watershed characteristics. The paper used the 5 m resolution DEM of the Jiuyuan gully watersheds in the Loess Plateau as the original data and extracted the feature points in every single watershed to reconstruct the DEM. The paper has achieved generalization from 1:10000 DEM to 1:50000 DEM by computing the best threshold. The best threshold is 0.06. In the last part of the paper, the height accuracy of the generalized DEM is analyzed by comparing it with some other classic methods, such as aggregation, resample, and VIP based on the original 1:50000 DEM. The outcome shows that the method performed well. The method can choose the best threshold according to the target generalization scale to decide the density of the feature points in the watershed. Meanwhile, this method can reserve the skeleton of the terrain, which can meet the needs of different levels of generalization. Additionally, through overlapped contour contrast, elevation statistical parameters and slope and aspect analysis, we found out that the W8D algorithm performed well and effectively in terrain representation. [ABSTRACT FROM AUTHOR]

A new Interpolation based Reversible Data Hiding (IRDH) scheme is reported in this paper. For different applications of an IRDH scheme to the digital image, video, multimedia, big-data and biological data, the embedding capacity requirement usually varies. Disregarding this important consideration, existing IRDH schemes do not offer a better embedding rate-distortion performance for varying size payloads. To attain this varying capacity requirement with our proposed adaptive embedding, we formulate a capacity control parameter and propose to utilize it to determine a minimum set of embeddable bits in a pixel. Additionally, we use a logical (or bit-wise) correlation between the embeddable pixel and estimated versions of an embedded pixel. Thereby, while a higher range between an upper and lower limit of the embedding capacity is maintained, a given capacity requirement within that limit is also attained with a better-embedded image quality. Computational modeling of all new processes of the scheme is presented, and performance of the scheme is evaluated with a set of popular test-images. Experimental results of our proposed scheme compared to the prominent IRDH schemes have recorded a significantly better-embedding rate-distortion performance. [ABSTRACT FROM AUTHOR]

We describe in this paper the experimental procedure, the data treatment and the quantification of the black body correction: an experimental approach to compensate for scattering and systematic biases in quantitative neutron imaging based on experimental data. The correction algorithm is based on two steps; estimation of the scattering component and correction using an enhanced normalization formula. The method incorporates correction terms into the image normalization procedure, which usually only includes open beam and dark current images (open beam correction). Our aim is to show its efficiency and reproducibility: we detail the data treatment procedures and quantitatively investigate the effect of the correction. Its implementation is included within the open source CT reconstruction software MuhRec. The performance of the proposed algorithm is demonstrated using simulated and experimental CT datasets acquired at the ICON and NEUTRA beamlines at the Paul Scherrer Institut. [ABSTRACT FROM AUTHOR]

Sparse spectral clustering (SSC) has become one of the most popular clustering approaches in recent years. However, its high computational complexity prevents its application to large-scale datasets such as hyperspectral images (HSIs). In this paper, we propose two efficient approximate sparse spectral clustering methods for HSIs clustering in which clustering performance is improved by utilizing local information among the data. Firstly, we construct a smaller representative dataset on which sparse spectral clustering is performed. Then the labels of ground object are extending to whole dataset based on the local information according to two extending strategies. The first one is that the local interpolation is utilized to improve the extension of the clustering result. The other one is that the label extension is turned to a problem of subspace embedding, and is fulfilled by locally linear embedding (LLE). Several experiments on HSIs demonstrated that the proposed algorithms are effective for HSIs clustering. [ABSTRACT FROM AUTHOR]

An end-to-end network traffic matrix is significantly helpful for network management and for Software Defined Networks (SDN). However, the end-to-end network traffic matrix's inferences and estimations are a challenging problem. Moreover, attaining the traffic matrix in high-speed networks for SDN is a prohibitive challenge. This paper investigates how to estimate and recover the end-to-end network traffic matrix in fine time granularity from the sampled traffic traces, which is a hard inverse problem. Different from previous methods, the fractal interpolation is used to reconstruct the finer-granularity network traffic. Then, the cubic spline interpolation method is used to obtain the smooth reconstruction values. To attain an accurate the end-to-end network traffic in fine time granularity, we perform a weighted-geometric-average process for two interpolation results that are obtained. The simulation results show that our approaches are feasible and effective. [ABSTRACT FROM AUTHOR]

The sampling of scale-free networks in Molecular Biology is usually achieved by growing networks from a seed using recursive algorithms with elementary moves which include the addition and deletion of nodes and bonds. These algorithms include the Barabási-Albert algorithm. Later algorithms, such as the Duplication-Divergence algorithm, the Solé algorithm and the iSite algorithm, were inspired by biological processes underlying the evolution of protein networks, and the networks they produce differ essentially from networks grown by the Barabási-Albert algorithm. In this paper the mean field analysis of these algorithms is reconsidered, and extended to variant and modified implementations of the algorithms. The degree sequences of scale-free networks decay according to a powerlaw distribution, namely P(k) ∼ k− γ, where γ is a scaling exponent. We derive mean field expressions for γ, and test these by numerical simulations. Generally, good agreement is obtained. We also found that some algorithms do not produce scale-free networks (for example some variant Barabási-Albert and Solé networks). [ABSTRACT FROM AUTHOR]

The availability of digital X-ray detectors, together with advances in reconstruction algorithms, creates an opportunity for bringing 3D capabilities to conventional radiology systems. The downside is that reconstruction algorithms for non-standard acquisition protocols are generally based on iterative approaches that involve a high computational burden. The development of new flexible X-ray systems could benefit from computer simulations, which may enable performance to be checked before expensive real systems are implemented. The development of simulation/reconstruction algorithms in this context poses three main difficulties. First, the algorithms deal with large data volumes and are computationally expensive, thus leading to the need for hardware and software optimizations. Second, these optimizations are limited by the high flexibility required to explore new scanning geometries, including fully configurable positioning of source and detector elements. And third, the evolution of the various hardware setups increases the effort required for maintaining and adapting the implementations to current and future programming models. Previous works lack support for completely flexible geometries and/or compatibility with multiple programming models and platforms. In this paper, we present FUX-Sim, a novel X-ray simulation/reconstruction framework that was designed to be flexible and fast. Optimized implementation for different families of GPUs (CUDA and OpenCL) and multi-core CPUs was achieved thanks to a modularized approach based on a layered architecture and parallel implementation of the algorithms for both architectures. A detailed performance evaluation demonstrates that for different system configurations and hardware platforms, FUX-Sim maximizes performance with the CUDA programming model (5 times faster than other state-of-the-art implementations). Furthermore, the CPU and OpenCL programming models allow FUX-Sim to be executed over a wide range of hardware platforms. [ABSTRACT FROM AUTHOR]

Delay represents a significant phenomenon in the dynamics of many human-related systems—including biological ones. It has i.a. a decisive impact on system stability, and the study of this influence is often mathematically demanding. This paper presents a computationally simple numerical gridding algorithm for the determination of stability margin delay values in multiple-delay linear systems. The characteristic quasi-polynomial—the roots of which decide about stability—is subjected to iterative discretization by means of pre-warped bilinear transformation. Then, a linear and a quadratic interpolation are applied to obtain the associated characteristic polynomial with integer powers. The roots of the associated characteristic polynomial are closely related to the estimation of roots of the original characteristic quasi-polynomial which agrees with the system′s eigenvalues. Since the stability border is crossed by the leading one, the switching root locus is enhanced using the Regula Falsi interpolation method. Our methodology is implemented on—and verified by—a numerical bio-cybernetic example of the stabilization of a human-being′s movement on a controlled swaying bow. The advantage of the proposed novel algorithm lies in the possibility of the rapid computation of polynomial zeros by means of standard programs for technical computing; in the low level of mathematical knowledge required; and, in the sufficiently high precision of the roots loci estimation. The relationship to the direct search QuasiPolynomial (mapping) Rootfinder algorithm and computational complexity are discussed as well. This algorithm is also applicable for systems with non-commensurate delays. [ABSTRACT FROM AUTHOR]

In this paper, a new off-line model predictive control strategy is presented for a kind of linear parameter varying system with polytopic uncertainty. A nest of shrinking ellipsoids is constructed by solving linear matrix inequality. By splitting the objective function into two parts, the proposed strategy moves most computations off-line. The on-line computation is only calculating the current control to assure the system shrinking into the smaller ellipsoid. With the proposed formulation, the stability of the closed system is proved, followed with two numerical examples to demonstrate the proposed method’s effectiveness in the end. [ABSTRACT FROM AUTHOR]

A fast and robust interpolation filter based on finite difference TPS has been proposed in this paper. The proposed method employs discrete cosine transform to efficiently solve the linear system of TPS equations in case of gridded data, and by a pre-defined weight function with respect to simulation residuals to reduce the effect of outliers and misclassified non-ground points on the accuracy of reference ground surface construction. Fifteen groups of benchmark datasets, provided by the International Society for Photogrammetry and Remote Sensing (ISPRS) commission, were employed to compare the performance of the proposed method with that of the multi-resolution hierarchical classification method (MHC). Results indicate that with respect to kappa coefficient and total error, the proposed method is averagely more accurate than MHC. Specifically, the proposed method is 1.03 and 1.32 times as accurate as MHC in terms of kappa coefficient and total errors. More importantly, the proposed method is averagely more than 8 times faster than MHC. In comparison with some recently developed methods, the proposed algorithm also achieves a good performance. [ABSTRACT FROM AUTHOR]

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers’ network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used “best-out-of-K” selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs. [ABSTRACT FROM AUTHOR]

The scientific demand for more accurate modeling of the climate system calls for more computing power to support higher resolutions, inclusion of more component models, more complicated physics schemes, and larger ensembles. As the recent improvements in computing power mostly come from the increasing number of nodes in a system and the integration of heterogeneous accelerators, how to scale the computing problems onto more nodes and various kinds of accelerators has become a challenge for the model development. This paper describes our efforts on developing a highly scalable framework for performing global atmospheric modeling on heterogeneous supercomputers equipped with various accelerators, such as GPU (Graphic Processing Unit), MIC (Many Integrated Core), and FPGA (Field Programmable Gate Arrays) cards. We propose a generalized partition scheme of the problem domain, so as to keep a balanced utilization of both CPU resources and accelerator resources. With optimizations on both computing and memory access patterns, we manage to achieve around 8 to 20 times speedup when comparing one hybrid GPU or MIC node with one CPU node with 12 cores. Using a customized FPGA-based data-flow engines, we see the potential to gain another 5 to 8 times improvement on performance. On heterogeneous supercomputers, such as Tianhe-1A and Tianhe-2, our framework is capable of achieving ideally linear scaling efficiency, and sustained double-precision performances of 581 Tflops on Tianhe-1A (using 3750 nodes) and 3.74 Pflops on Tianhe-2 (using 8644 nodes). Our study also provides an evaluation on the programming paradigm of various accelerator architectures (GPU, MIC, FPGA) for performing global atmospheric simulation, to form a picture about both the potential performance benefits and the programming efforts involved. [ABSTRACT FROM AUTHOR]

Among different stochastic user equilibrium (SUE) traffic assignment models, the Logit-based stochastic user equilibrium (SUE) is extensively investigated by researchers. It is constantly formulated as the low-level problem to describe the drivers’ route choice behavior in bi-level problems such as network design, toll optimization et al. The Probit-based SUE model receives far less attention compared with Logit-based model albeit the assignment result is more consistent with drivers’ behavior. It is well-known that due to the identical and irrelevant alternative (IIA) assumption, the Logit-based SUE model is incapable to deal with route overlapping problem and cannot account for perception variance with respect to trips. This paper aims to explore the network capacity with Probit-based traffic assignment model and investigate the differences of it is with Logit-based SUE traffic assignment models. The network capacity is formulated as a bi-level programming where the up-level program is to maximize the network capacity through optimizing input parameters (O-D multiplies and signal splits) while the low-level program is the Logit-based or Probit-based SUE problem formulated to model the drivers’ route choice. A heuristic algorithm based on sensitivity analysis of SUE problem is detailed presented to solve the proposed bi-level program. Three numerical example networks are used to discuss the differences of network capacity between Logit-based SUE constraint and Probit-based SUE constraint. This study finds that while the network capacity show different results between Probit-based SUE and Logit-based SUE constraints, the variation pattern of network capacity with respect to increased level of travelers’ information for general network under the two type of SUE problems is the same, and with certain level of travelers’ information, both of them can achieve the same maximum network capacity. [ABSTRACT FROM AUTHOR]

Anonymity, which is more and more important to multi-receiver schemes, has been taken into consideration by many researchers recently. To protect the receiver anonymity, in 2010, the first multi-receiver scheme based on the Lagrange interpolating polynomial was proposed. To ensure the sender’s anonymity, the concept of the ring signature was proposed in 2005, but afterwards, this scheme was proven to has some weakness and at the same time, a completely anonymous multi-receiver signcryption scheme is proposed. In this completely anonymous scheme, the sender anonymity is achieved by improving the ring signature, and the receiver anonymity is achieved by also using the Lagrange interpolating polynomial. Unfortunately, the Lagrange interpolation method was proven a failure to protect the anonymity of receivers, because each authorized receiver could judge whether anyone else is authorized or not. Therefore, the completely anonymous multi-receiver signcryption mentioned above can only protect the sender anonymity. In this paper, we propose a new completely anonymous multi-receiver signcryption scheme with a new polynomial technology used to replace the Lagrange interpolating polynomial, which can mix the identity information of receivers to save it as a ciphertext element and prevent the authorized receivers from verifying others. With the receiver anonymity, the proposed scheme also owns the anonymity of the sender at the same time. Meanwhile, the decryption fairness and public verification are also provided. [ABSTRACT FROM AUTHOR]

In this paper, the Hager and Zhang (HZ) conjugate gradient (CG) method and the modified HZ (MHZ) CG method are presented for large-scale nonsmooth convex minimization. Under some mild conditions, convergent results of the proposed methods are established. Numerical results show that the presented methods can be better efficiency for large-scale nonsmooth problems, and several problems are tested (with the maximum dimensions to 100,000 variables). [ABSTRACT FROM AUTHOR]

This paper introduces the Fuzzy Logic Hypercube Interpolator (FLHI) and demonstrates applications in control of multiple-input single-output (MISO) and multiple-input multiple-output (MIMO) processes with Hammerstein nonlinearities. FLHI consists of a Takagi-Sugeno fuzzy inference system where membership functions act as kernel functions of an interpolator. Conjunction of membership functions in an unitary hypercube space enables multivariable interpolation of N-dimensions. Membership functions act as interpolation kernels, such that choice of membership functions determines interpolation characteristics, allowing FLHI to behave as a nearest-neighbor, linear, cubic, spline or Lanczos interpolator, to name a few. The proposed interpolator is presented as a solution to the modeling problem of static nonlinearities since it is capable of modeling both a function and its inverse function. Three study cases from literature are presented, a single-input single-output (SISO) system, a MISO and a MIMO system. Good results are obtained regarding performance metrics such as set-point tracking, control variation and robustness. Results demonstrate applicability of the proposed method in modeling Hammerstein nonlinearities and their inverse functions for implementation of an output compensator with Model Based Predictive Control (MBPC), in particular Dynamic Matrix Control (DMC). [ABSTRACT FROM AUTHOR]

Generating synthetic baseline populations is a fundamental step of agent-based modeling and simulation, which is growing fast in a wide range of socio-economic areas including transportation planning research. Traditionally, in many commercial and non-commercial microsimulation systems, the iterative proportional fitting (IPF) procedure has been used for creating the joint distribution of individuals when combining a reference joint distribution with target marginal distributions. Although IPF is simple, computationally efficient, and rigorously founded, it is unclear whether IPF well preserves the dependence structure of the reference joint table sufficiently when fitting it to target margins. In this paper, a novel method is proposed based on the copula concept in order to provide an alternative approach to the problem that IPF resolves. The dependency characteristic measures were computed and the results from the proposed method and IPF were compared. In most test cases, the proposed method outperformed IPF in preserving the dependence structure of the reference joint distribution. [ABSTRACT FROM AUTHOR]

We introduce a fast error-free tracking method applicable to sequences of two and three dimensional images. The core idea is to use Quadtree (resp. Octree) data structures for representing the spatial discretization of an image in two (resp. three) spatial dimensions. This representation enables one to merge into large computational cells the regions that can be faithfully described with such a coarse representation, thus significantly reducing the total number of degrees of freedom that are processed, without compromising accuracy. This encoding is particularly effective in the case of algorithms based on moving fronts, since the adaptive refinement provides a natural means to focus the processing resources on information near the moving front. In this paper, we use an existing contour based tracker and reformulate it to the case of Quad-/Oc-tree data structures. Relevant mathematical assumptions and derivations are presented for this purpose. We then demonstrate that, on standard bio-medical image sequences, a speed up of 5X is easily achieved in 2D and about 10X in 3D. [ABSTRACT FROM AUTHOR]

Background: The tools and techniques used in morphometrics have always aimed to transform the physical shape of an object into a concise set of numerical data for mathematical analysis. The advent of landmark-based morphometrics opened new avenues of research, but these methods are not without drawbacks. The time investment required of trained individuals to accurately landmark a data set is significant, and the reliance on readily-identifiable physical features can hamper research efforts. This is especially true of those investigating smooth or featureless surfaces. Methods: In this paper, we present a new method to perform this transformation for data obtained from high-resolution scanning technology. This method uses surface scans, instead of landmarks, to calculate a shape difference metric analogous to Procrustes distance and perform superimposition. This is accomplished by building upon and extending the Iterative Closest Point algorithm. We also explore some new ways this data can be used; for example, we can calculate an averaged surface directly and visualize point-wise shape information over this surface. Finally, we briefly demonstrate this method on a set of primate skulls and compare the results of the new methodology with traditional geometric morphometric analysis. [ABSTRACT FROM AUTHOR]

In a queueing system with the dropping function the arriving customer can be denied service (dropped) with the probability that is a function of the queue length at the time of arrival of this customer. The potential applicability of such mechanism is very wide due to the fact that by choosing the shape of this function one can easily manipulate several performance characteristics of the queueing system. In this paper we carry out analysis of the queueing system with the dropping function and a very general model of arrival process—the model which includes batch arrivals and the interarrival time autocorrelation, and allows for fitting the actual shape of the interarrival time distribution and its moments. For such a system we obtain formulas for the distribution of the queue length and the overall customer loss ratio. The analytical results are accompanied with numerical examples computed for several dropping functions. [ABSTRACT FROM AUTHOR]