Search

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

With the convergence of various broadcasting systems, the amount of content available in mobile terminals including IPTV has significantly increased. In this paper, we propose a system that enables users to schedule programs considering both section video clips and full video clips based on the user detection method with similar preference. And, since the system constituting the contents can be classified according to the program, the proposed method can store a program desired by the user, and thus create and schedule a kind of individual channel. Experimental results show that the proposed method has a higher prediction accuracy; this is accomplished by comparing existing channel recommendation methods with the program recommendation methods proposed in this paper. [ABSTRACT FROM AUTHOR]

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios. [ABSTRACT FROM AUTHOR]

Urban spaces have a great impact on how people’s emotion and behaviour. There are number of factors that impact our brain responses to a space. This paper presents a novel urban place recommendation approach, that is based on modelling in-situ EEG data. The research investigations leverages on newly affordable Electroencephalogram (EEG) headsets, which has the capability to sense mental states such as meditation and attention levels. These emerging devices have been utilized in understanding how human brains are affected by the surrounding built environments and natural spaces. In this paper, mobile EEG headsets have been used to detect mental states at different types of urban places. By analysing and modelling brain activity data, we were able to classify three different places according to the mental state signature of the users, and create an association map to guide and recommend people to therapeutic places that lessen brain fatigue and increase mental rejuvenation. Our mental states classifier has achieved accuracy of (%90.8). NeuroPlace breaks new ground not only as a mobile ubiquitous brain monitoring system for urban computing, but also as a system that can advise urban planners on the impact of specific urban planning policies and structures. We present and discuss the challenges in making our initial prototype more practical, robust, and reliable as part of our on-going research. In addition, we present some enabling applications using the proposed architecture. [ABSTRACT FROM AUTHOR]

In recent years, with the development of computer science, deep learning is held as competent enough to solve the problem of inference and learning in high dimensional space. Therefore, it has received unprecedented attention from both the academia and the business community. Compared with CPU/GPU, FPGA has attracted much attention for its high-energy efficiency, short development cycle and reconfigurability in the aspect of deep learning algorithm. However, because of the limited research on OpenCL optimization on FPGA of deep learning algorithms, OpenCL tools and models applied to CPU/GPU cannot be directly used on FPGA. This makes it difficult for software programmers to use FPGA when implementing deep learning algorithms for a rewarding performance. To solve this problem, this paper proposed an OpenCL computational model based on FPGA template architecture to optimize the time-consuming convolution layer in deep learning. The comparison between the program applying the computational model and the corresponding optimization program provided by Xilinx indicates that the former is 8-40 times higher than the latter in terms of performance. [ABSTRACT FROM AUTHOR]

Temporal hierarchies have been widely used during the past few years as they are capable to provide more accurate coherent forecasts at different planning horizons. However, they still display some limitations, being mainly subject to the forecasting methods used for generating the base forecasts and the particularities of the examined series. This paper deals with such limitations by considering three different strategies: (i) combining forecasts of multiple methods, (ii) applying bias adjustments and (iii) selectively implementing temporal hierarchies to avoid seasonal shrinkage. The proposed strategies can be applied either separately or simultaneously, being complements to the method considered for reconciling the base forecasts and completely independent from each other. Their effect is evaluated using the monthly series of the M and M3 competitions. The results are very promising, displaying lots of potential for improving the performance of temporal hierarchies, both in terms of accuracy and bias. [ABSTRACT FROM AUTHOR]

Filter or screening methods are often used as a preprocessing step for reducing the number of variables used by a learning algorithm in obtaining a classification or regression model. While there are many such filter methods, there is a need for an objective evaluation of these methods. Such an evaluation is needed to compare them with each other and also to answer whether they are at all useful, or a learning algorithm could do a better job without them. For this purpose, many popular screening methods are partnered in this paper with three regression learners and five classification learners and evaluated on ten real datasets to obtain accuracy criteria such as R-square and area under the ROC curve (AUC). The obtained results are compared through curve plots and comparison tables in order to find out whether screening methods help improve the performance of learning algorithms and how they fare with each other. Our findings revealed that the screening methods were useful in improving the prediction of the best learner on two regression and two classification datasets out of the ten datasets evaluated. [ABSTRACT FROM AUTHOR]

Due to the fast speed of data generation and collection from advanced equipment, the amount of data obviously overflows the limit of available memory space and causes difficulties achieving high learning accuracy. Several methods based on discard-after-learn concept have been proposed. Some methods were designed to cope with a single incoming datum but some were designed for a chunk of incoming data. Although the results of these approaches are rather impressive, most of them are based on temporally adding more neurons to learn new incoming data without any neuron merging process which can obviously increase the computational time and space complexities. Only online versatile elliptic basis function (VEBF) introduced neuron merging to reduce the space-time complexity of learning only a single incoming datum. This paper proposed a method for further enhancing the capability of discard-after-learn concept for streaming data-chunk environment in terms of low computational time and neural space complexities. A set of recursive functions for computing the relevant parameters of a new neuron, based on statistical confidence interval, was introduced. The newly proposed method, named streaming chunk incremental learning (SCIL), increases the plasticity and the adaptabilty of the network structure according to the distribution of incoming data and their classes. When being compared to the others in incremental-like manner, based on 11 benchmarked data sets of 150 to 581,012 samples with attributes ranging from 4 to 1,558 formed as streaming data, the proposed SCIL gave better accuracy and time in most data sets. [ABSTRACT FROM AUTHOR]

In this paper, we propose a human action recognition method using HOIRM (histogram of oriented interest region motion) feature fusion and a BOW (bag of words) model based on AP (affinity propagation) clustering. First, a HOIRM feature extraction method based on spatiotemporal interest points ROI is proposed. HOIRM can be regarded as a middle-level feature between local and global features. Then, HOIRM is fused with 3D HOG and 3D HOF local features using a cumulative histogram. The method further improves the robustness of local features to camera view angle and distance variations in complex scenes, which in turn improves the correct rate of action recognition. Finally, a BOW model based on AP clustering is proposed and applied to action classification. It obtains the appropriate visual dictionary capacity and achieves better clustering effect for the joint description of a variety of features. The experimental results demonstrate that by using the fused features with the proposed BOW model, the average recognition rate is 95.75% in the KTH database, and 88.25% in the UCF database, which are both higher than those by using only 3D HOG+3D HOF or HOIRM features. Moreover, the average recognition rate achieved by the proposed method in the two databases is higher than that obtained by other methods. [ABSTRACT FROM AUTHOR]

DIBR-3D technology has evolved over the past few years with the demands of consumers increasing in recent times for future free-view 3D videos on their home televisions. The main issue in 3D technology is the lack of 3D content available to watch using the traditional TV systems. Although, some sophisticated devices like stereoscopic cameras have been used to fill the gap between the 3D content demand and 3D content supply. But the content generated through these sophisticated devices can not be displayed on the traditional TV systems, so there needs to be some mechanism which is inline with the traditional TV. Furthermore, the huge collection of existing 2D content should be converted to 3D using depth image-based rendering techniques. This conversion technique can highly contribute in overcoming the shortage problem of the 3D content. This paper presents a novel approach for converting 2D degraded image for DIBR 3D-TV view. This degraded or noisy/blur image is enhanced through image dehazing and Directional Filter Bank (DFB). This enhancement is necessary because of the occlusion effect or hole filling problem that occurs due to imperfect depth map. The enhanced image is then segmented into the foreground image and the background image. After the segmentation, the depth map is generated using image profiles. Moreover, Stereoscopic images are finally produced using the DIBR procedure which is based on the 2D input image and the corresponding depth map. We have verified the results of the proposed approach by comparing the results with the existing state-of-the-art techniques. [ABSTRACT FROM AUTHOR]

Ex-ante online risk assessment for building emergency evacuation is essential to protect human life and property. Current risk assessment methods are limited by the tradeoff between accuracy and efficiency. In this paper, we propose an online method that overcomes this tradeoff based on multimedia data (e.g. videos data from surveillance cameras) and deep learning. The method consists of two parts. The first estimates the evacuee position as input for training the assessment model to then perform risk assessment in real scenarios. The second considers a social force model based on the evacuation simulation for the output of training model. We verify the proposed method in simulation and real scenarios. Model sensitivity analyses and large-scale tests demonstrate the usability and superiority of the proposed method. By the method, the computation time of risk assessment could be decreased from 10 minutes (by traditional simulation method) to 2.18 s. [ABSTRACT FROM AUTHOR]

Temperament and Psychological Types can be defined as innate psychological characteristics associated with how we relate with the world, and often influence our study and career choices. Furthermore, understanding these features help us manage conflicts, develop leadership, improve teaching and many other skills. Assigning temperament and psychological types is usually made by filling specific questionnaires. However, it is possible to identify temperamental characteristics from a linguistic and behavioral analysis of social media data from a user. Thus, machine-learning algorithms can be used to learn from a user’s social media data and infer his/her behavioral type. This paper initially provides a brief historical review of theories on temperament and then brings a survey of research aimed at predicting temperament and psychological types from social media data. It follows with the proposal of a framework to predict temperament and psychological types from a linguistic and behavioral analysis of Twitter data. The proposed framework infers temperament types following the David Keirsey’s model, and psychological types based on the MBTI model. Various data modelling and classifiers are used. The results showed that Random Forests with the LIWC technique can predict with 96.46% of accuracy the Artisan temperament, 92.19% the Guardian temperament, 78.68% the Idealist, and 83.82% the Rational temperament. The MBTI results also showed that Random Forests achieved a better performance with an accuracy of 82.05% for the E/I pair, 88.38% for the S/N pair, 80.57% for the T/F pair, and 78.26% for the J/P pair. [ABSTRACT FROM AUTHOR]

The accuracy and diversity of recommendation algorithms have always been the research hotspot of recommender systems. A good recommender system should not only have high accuracy and diversity, but also have adequate robustness against spammer attacks. However, the issue of recommendation robustness has received relatively little attention in the literature. In this paper, we systematically study the influences of different spammer behaviors on the recommendation results in various recommendation algorithms. We further propose an improved algorithm by incorporating the inner-similarity of user’s purchased items in the classic KNN approach. The new algorithm effectively enhances the robustness against spammer attacks and thus outperforms traditional algorithms in recommendation accuracy and diversity when spammers exist in the online commercial systems. [ABSTRACT FROM AUTHOR]

In palynology, the visual classification of pollen grains from different species is a hard task which is usually tackled by human operators using microscopes. Its complete automatization would save a high quantity of resources and provide valuable improvements especially for allergy-related information systems, but also for other application fields as paleoclimate reconstruction, quality control of honey based products, collection of evidences in criminal investigations or fabric dating and tracking. This paper presents three state-of-the-art deep learning classification methods applied to the recently published POLEN23E image dataset. The three methods make use of convolutional neural networks: the first one is strictly based on the idea of transfer learning, the second one is based on feature extraction and the third one represents a hybrid approach, combining transfer learning and feature extraction. The results from the three methods are indeed very good, reaching over 97% correct classification rates in images not previously seen by the models, where other authors reported around 70. [ABSTRACT FROM AUTHOR]

Ensembles are a well established machine learning paradigm, leading to accurate and robust models, predominantly applied to predictive modeling tasks. Ensemble models comprise a finite set of diverse predictive models whose combined output is expected to yield an improved predictive performance as compared to an individual model. In this paper, we propose a new method for learning ensembles of process-based models of dynamic systems. The process-based modeling paradigm employs domain-specific knowledge to automatically learn models of dynamic systems from time-series observational data. Previous work has shown that ensembles based on sampling observational data (i.e., bagging and boosting), significantly improve predictive performance of process-based models. However, this improvement comes at the cost of a substantial increase of the computational time needed for learning. To address this problem, the paper proposes a method that aims at efficiently learning ensembles of process-based models, while maintaining their accurate long-term predictive performance. This is achieved by constructing ensembles with sampling domain-specific knowledge instead of sampling data. We apply the proposed method to and evaluate its performance on a set of problems of automated predictive modeling in three lake ecosystems using a library of process-based knowledge for modeling population dynamics. The experimental results identify the optimal design decisions regarding the learning algorithm. The results also show that the proposed ensembles yield significantly more accurate predictions of population dynamics as compared to individual process-based models. Finally, while their predictive performance is comparable to the one of ensembles obtained with the state-of-the-art methods of bagging and boosting, they are substantially more efficient. [ABSTRACT FROM AUTHOR]

In this paper, we propose a sentiment-based approach to investigate the temporal and spatiotemporal effects on tourists’ emotions when visiting a city’s tourist destinations. Our approach consists of four steps: data collection and preprocessing from social media; visitor origin identification; visit sentiment identification; and temporal and spatiotemporal analysis. The temporal and spatiotemporal dimensions include day of the year, season of the year, day of the week, location sentiment progression, enjoyment measure, and multi-location sentiment progression. We apply this approach to the city of Chicago using over eight million tweets. Results show that seasonal weather, as well as special days and activities like concerts, impact tourists’ emotions. In addition, our analysis suggests that tourists experience greater levels of enjoyment in places such as observatories rather than zoos. Finally, we find that local and international visitors tend to convey negative sentiment when visiting more than one attraction in a day whereas the opposite holds for out of state visitors. [ABSTRACT FROM AUTHOR]

The number of people diagnosed with dementia is expected to rise in the coming years. Given that there is currently no definite cure for dementia and the cost of care for this condition soars dramatically, slowing the decline and maintaining independent living are important goals for supporting people with dementia. This paper discusses a study that is called Technology Integrated Health Management (TIHM). TIHM is a technology assisted monitoring system that uses Internet of Things (IoT) enabled solutions for continuous monitoring of people with dementia in their own homes. We have developed machine learning algorithms to analyse the correlation between environmental data collected by IoT technologies in TIHM in order to monitor and facilitate the physical well-being of people with dementia. The algorithms are developed with different temporal granularity to process the data for long-term and short-term analysis. We extract higher-level activity patterns which are then used to detect any change in patients’ routines. We have also developed a hierarchical information fusion approach for detecting agitation, irritability and aggression. We have conducted evaluations using sensory data collected from homes of people with dementia. The proposed techniques are able to recognise agitation and unusual patterns with an accuracy of up to 80%. [ABSTRACT FROM AUTHOR]

Sentiment analysis techniques are increasingly exploited to categorize the opinion text to one or more predefined sentiment classes for the creation and automated maintenance of review-aggregation websites. In this paper, a Malay sentiment analysis classification model is proposed to improve classification performances based on the semantic orientation and machine learning approaches. First, a total of 2,478 Malay sentiment-lexicon phrases and words are assigned with a synonym and stored with the help of more than one Malay native speaker, and the polarity is manually allotted with a score. In addition, the supervised machine learning approaches and lexicon knowledge method are combined for Malay sentiment classification with evaluating thirteen features. Finally, three individual classifiers and a combined classifier are used to evaluate the classification accuracy. In experimental results, a wide-range of comparative experiments is conducted on a Malay Reviews Corpus (MRC), and it demonstrates that the feature extraction improves the performance of Malay sentiment analysis based on the combined classification. However, the results depend on three factors, the features, the number of features and the classification approach. [ABSTRACT FROM AUTHOR]

In this paper, we propose an emotion separated method(SeTF·IDF) to assign the emotion labels of sentences with different values, which has a better visual effect compared with the values represented by TF·IDF in the visualization of a multi-label Chinese emotional corpus Ren_CECps. Inspired by the enormous improvement of the visualization map propelled by the changed distances among the sentences, we being the first group utilizes the Word Mover’s Distance(WMD) algorithm as a way of feature representation in Chinese text emotion classification. Our experiments show that both in 80% for training, 20% for testing and 50% for training, 50% for testing experiments of Ren_CECps, WMD features get the best f1 scores and have a greater increase compared with the same dimension feature vectors obtained by dimension reduction TF·IDF method. Compared experiments in English corpus also show the efficiency of WMD features in the cross-language field. [ABSTRACT FROM AUTHOR]

Biometric recognition technology based on eye-movement dynamics has been in development for more than ten years. Different visual tasks, feature extraction and feature recognition methods are proposed to improve the performance of eye movement biometric system. However, the correct identification and verification rates, especially in long-term experiments, as well as the effects of visual tasks and eye trackers’ temporal and spatial resolution are still the foremost considerations in eye movement biometrics. With a focus on these issues, we proposed a new visual searching task for eye movement data collection and a new class of eye movement features for biometric recognition. In order to demonstrate the improvement of this visual searching task being used in eye movement biometrics, three other eye movement feature extraction methods were also tested on our eye movement datasets. Compared with the original results, all three methods yielded better results as expected. In addition, the biometric performance of these four feature extraction methods was also compared using the equal error rate (EER) and Rank-1 identification rate (Rank-1 IR), and the texture features introduced in this paper were ultimately shown to offer some advantages with regard to long-term stability and robustness over time and spatial precision. Finally, the results of different combinations of these methods with a score-level fusion method indicated that multi-biometric methods perform better in most cases. [ABSTRACT FROM AUTHOR]

Micro-blogging systems have become one of the most important ways for information sharing. Network structure and users’ interactions such as forwarding behaviors have aroused considerable research attention, while mention, as a key feature in micro-blogging platforms which can improve the visibility of a message and direct it to a particular user beyond the underlying social structure, is seldom studied in previous works. In this paper, we empirically study the mention effect in information diffusion, using the dataset from a population-scale social media website. We find that users with high number of followers would receive much more mentions than others. We further investigate the effect of mention in information diffusion by examining the response probability with respect to the number of mentions in a message and observe a saturation at around 5 mentions. Furthermore, we find that the response probability is the highest when a reciprocal followship exists between users, and one is more likely to receive a target user’s response if they have similar social status. To illustrate these findings, we propose the response prediction task and formulate it as a binary classification problem. Extensive evaluation demonstrates the effectiveness of discovered factors. Our results have consequences for the understanding of human dynamics on the social network, and potential implications for viral marketing and public opinion monitoring. [ABSTRACT FROM AUTHOR]

Autism spectrum disorder (ASD) is a wide-ranging collection of developmental diseases with varying symptoms and degrees of disability. Currently, ASD is diagnosed mainly with psychometric tools, often unable to provide an early and reliable diagnosis. Recently, biochemical methods are being explored as a means to meet the latter need. For example, an increased predisposition to ASD has been associated with abnormalities of metabolites in folate-dependent one carbon metabolism (FOCM) and transsulfuration (TS). Multiple metabolites in the FOCM/TS pathways have been measured, and statistical analysis tools employed to identify certain metabolites that are closely related to ASD. The prime difficulty in such biochemical studies comes from (i) inefficient determination of which metabolites are most important and (ii) understanding how these metabolites are collectively related to ASD. This paper presents a new method based on scores produced in Support Vector Machine (SVM) modeling combined with High Dimensional Model Representation (HDMR) sensitivity analysis. The new method effectively and efficiently identifies the key causative metabolites in FOCM/TS pathways, ranks their importance, and discovers their independent and correlative action patterns upon ASD. Such information is valuable not only for providing a foundation for a pathological interpretation but also for potentially providing an early, reliable diagnosis ideally leading to a subsequent comprehensive treatment of ASD. With only tens of SVM model runs, the new method can identify the combinations of the most important metabolites in the FOCM/TS pathways that lead to ASD. Previous efforts to find these metabolites required hundreds of thousands of model runs with the same data. [ABSTRACT FROM AUTHOR]

Music genre classification is a challenging research concept, for which open questions remain regarding classification approach, music piece representation, distances between/within genres, and so on. In this paper an investigation on the classification of generated music pieces is performed, based on the idea that grouping close related known pieces in different sets –or clusters– and then generating in an automatic way a new song which is somehow “inspired” in each set, the new song would be more likely to be classified as belonging to the set which inspired it, based on the same distance used to separate the clusters. Different music pieces representations and distances among pieces are used; obtained results are promising, and indicate the appropriateness of the used approach even in a such a subjective area as music genre classification is. [ABSTRACT FROM AUTHOR]

In this paper, we propose a face recognition algorithm based on a combination of vector quantization (VQ) and Markov stationary features (MSF). The VQ algorithm has been shown to be an effective method for generating features; it extracts a codevector histogram as a facial feature representation for face recognition. Still, the VQ histogram features are unable to convey spatial structural information, which to some extent limits their usefulness in discrimination. To alleviate this limitation of VQ histograms, we utilize Markov stationary features (MSF) to extend the VQ histogram-based features so as to add spatial structural information. We demonstrate the effectiveness of our proposed algorithm by achieving recognition results superior to those of several state-of-the-art methods on publicly available face databases. [ABSTRACT FROM AUTHOR]

DNA-binding proteins play pivotal roles in alternative splicing, RNA editing, methylating and many other biological functions for both eukaryotic and prokaryotic proteomes. Predicting the functions of these proteins from primary amino acids sequences is becoming one of the major challenges in functional annotations of genomes. Traditional prediction methods often devote themselves to extracting physiochemical features from sequences but ignoring motif information and location information between motifs. Meanwhile, the small scale of data volumes and large noises in training data result in lower accuracy and reliability of predictions. In this paper, we propose a deep learning based method to identify DNA-binding proteins from primary sequences alone. It utilizes two stages of convolutional neutral network to detect the function domains of protein sequences, and the long short-term memory neural network to identify their long term dependencies, an binary cross entropy to evaluate the quality of the neural networks. When the proposed method is tested with a realistic DNA binding protein dataset, it achieves a prediction accuracy of 94.2% at the Matthew’s correlation coefficient of 0.961. Compared with the LibSVM on the arabidopsis and yeast datasets via independent tests, the accuracy raises by 9% and 4% respectively. Comparative experiments using different feature extraction methods show that our model performs similar accuracy with the best of others, but its values of sensitivity, specificity and AUC increase by 27.83%, 1.31% and 16.21% respectively. Those results suggest that our method is a promising tool for identifying DNA-binding proteins. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new automatic hyperparameter selection approach for determining the optimal network configuration (network structure and hyperparameters) for deep neural networks using particle swarm optimization (PSO) in combination with a steepest gradient descent algorithm. In the proposed approach, network configurations were coded as a set of real-number m-dimensional vectors as the individuals of the PSO algorithm in the search procedure. During the search procedure, the PSO algorithm is employed to search for optimal network configurations via the particles moving in a finite search space, and the steepest gradient descent algorithm is used to train the DNN classifier with a few training epochs (to find a local optimal solution) during the population evaluation of PSO. After the optimization scheme, the steepest gradient descent algorithm is performed with more epochs and the final solutions (pbest and gbest) of the PSO algorithm to train a final ensemble model and individual DNN classifiers, respectively. The local search ability of the steepest gradient descent algorithm and the global search capabilities of the PSO algorithm are exploited to determine an optimal solution that is close to the global optimum. We constructed several experiments on hand-written characters and biological activity prediction datasets to show that the DNN classifiers trained by the network configurations expressed by the final solutions of the PSO algorithm, employed to construct an ensemble model and individual classifier, outperform the random approach in terms of the generalization performance. Therefore, the proposed approach can be regarded an alternative tool for automatic network structure and parameter selection for deep neural networks. [ABSTRACT FROM AUTHOR]

Multi-objective clustering has received widespread attention recently, as it can obtain more accurate and reasonable solution. In this paper, an improved multi-objective clustering framework using particle swarm optimization (IMCPSO) is proposed. Firstly, a novel particle representation for clustering problem is designed to help PSO search clustering solutions in continuous space. Secondly, the distribution of Pareto set is analyzed. The analysis results are applied to the leader selection strategy, and make algorithm avoid trapping in local optimum. Moreover, a clustering solution-improved method is proposed, which can increase the efficiency in searching clustering solution greatly. In the experiments, 28 datasets are used and nine state-of-the-art clustering algorithms are compared, the proposed method is superior to other approaches in the evaluation index ARI. [ABSTRACT FROM AUTHOR]

Broken water pumps continue to impede efforts to deliver clean and economically-viable water to the global poor. The literature has demonstrated that customers’ health benefits and willingness to pay for clean water are best realized when clean water infrastructure performs extremely well (>99% uptime). In this paper, we used sensor data from 42 Afridev-brand handpumps observed for 14 months in western Kenya to demonstrate how sensors and supervised ensemble machine learning could be used to increase total fleet uptime from a best-practices baseline of about 70% to >99%. We accomplish this increase in uptime by forecasting pump failures and identifying existing failures very quickly. Comparing the costs of operating the pump per functional year over a lifetime of 10 years, we estimate that implementing this algorithm would save 7% on the levelized cost of water relative to a sensor-less scheduled maintenance program. Combined with a rigorous system for dispatching maintenance personnel, implementing this algorithm in a real-world program could significantly improve health outcomes and customers’ willingness to pay for water services. [ABSTRACT FROM AUTHOR]

A long-term goal of AI is to produce agents that can learn a diversity of skills throughout their lifetimes and continuously improve those skills via experience. A longstanding obstacle towards that goal is catastrophic forgetting, which is when learning new information erases previously learned information. Catastrophic forgetting occurs in artificial neural networks (ANNs), which have fueled most recent advances in AI. A recent paper proposed that catastrophic forgetting in ANNs can be reduced by promoting modularity, which can limit forgetting by isolating task information to specific clusters of nodes and connections (functional modules). While the prior work did show that modular ANNs suffered less from catastrophic forgetting, it was not able to produce ANNs that possessed task-specific functional modules, thereby leaving the main theory regarding modularity and forgetting untested. We introduce diffusion-based neuromodulation, which simulates the release of diffusing, neuromodulatory chemicals within an ANN that can modulate (i.e. up or down regulate) learning in a spatial region. On the simple diagnostic problem from the prior work, diffusion-based neuromodulation 1) induces task-specific learning in groups of nodes and connections (task-specific localized learning), which 2) produces functional modules for each subtask, and 3) yields higher performance by eliminating catastrophic forgetting. Overall, our results suggest that diffusion-based neuromodulation promotes task-specific localized learning and functional modularity, which can help solve the challenging, but important problem of catastrophic forgetting. [ABSTRACT FROM AUTHOR]

With the continuing growth of multi-media learning resources, it is important to offer methods helping learners to explore and acquire relevant learning information effectively. As services that organize multi-media learning materials together to support programming learning, the digital case-based learning system is needed. In order to create a case-oriented e-learning system, this paper concentrates on the digital case study of multi-media resources and learning processes with an integrated framework. An integration of multi-media resources, testing and learning strategies recommendation as the learning unit is proposed in the digital case-based learning framework. The learning mechanism of learning guidance, multi-media materials learning and testing feedback is supported in our project. An improved personalized genetic algorithm which incorporates preference information and usage degree into the crossover and mutation process is proposed to assemble the personalized test sheet for each learner. A learning strategies recommendation solution is proposed to recommend learning strategies for learners to help them to learn. The experiments are conducted to prove that the proposed approaches are capable of constructing personalized sheets and the effectiveness of the framework. [ABSTRACT FROM AUTHOR]

In recent years, safer and more reliable biometric methods have been developed. Apart from the need for enhanced security, the media and entertainment sectors have also been applying biometrics in the emerging market of user-adaptable objects/systems to make these systems more user-friendly. However, the complexity of some state-of-the-art biometric systems (e.g., iris recognition) or their high false rejection rate (e.g., fingerprint recognition) is neither compatible with the simple hardware architecture required by reduced-size devices nor the new trend of implementing smart objects within the dynamic market of the Internet of Things (IoT). It was recently shown that an individual can be recognized by extracting features from their electrocardiogram (ECG). However, most current ECG-based biometric algorithms are computationally demanding and/or rely on relatively large (several seconds) ECG samples, which are incompatible with the aforementioned application fields. Here, we present a computationally low-cost method (patent pending), including simple mathematical operations, for identifying a person using only three ECG morphology-based characteristics from a single heartbeat. The algorithm was trained/tested using ECG signals of different duration from the Physionet database on more than 60 different training/test datasets. The proposed method achieved maximal averaged accuracy of 97.450% in distinguishing each subject from a ten-subject set and false acceptance and rejection rates (FAR and FRR) of 5.710±1.900% and 3.440±1.980%, respectively, placing Beat-ID in a very competitive position in terms of the FRR/FAR among state-of-the-art methods. Furthermore, the proposed method can identify a person using an average of 1.020 heartbeats. It therefore has FRR/FAR behavior similar to obtaining a fingerprint, yet it is simpler and requires less expensive hardware. This method targets low-computational/energy-cost scenarios, such as tiny wearable devices (e.g., a smart object that automatically adapts its configuration to the user). A hardware proof-of-concept implementation is presented as an annex to this paper. [ABSTRACT FROM AUTHOR]

Video based object recognition and classification has been widely studied in computer vision and image processing area. One main issue of this task is to develop an effective representation for video. This problem can generally be formulated as image set representation. In this paper, we present a new method called Multiple Covariance Discriminative Learning (MCDL) for image set representation and classification problem. The core idea of MCDL is to represent an image set using multiple covariance matrices with each covariance matrix representing one cluster of images. Firstly, we use the Nonnegative Matrix Factorization (NMF) method to do image clustering within each image set, and then adopt Covariance Discriminative Learning on each cluster (subset) of images. At last, we adopt KLDA and nearest neighborhood classification method for image set classification. Promising experimental results on several datasets show the effectiveness of our MCDL method. [ABSTRACT FROM AUTHOR]

In many computer vision and machine learning applications, the data sets distribute on certain low-dimensional subspaces. Subspace clustering is a powerful technology to find the underlying subspaces and cluster data points correctly. However, traditional subspace clustering methods can only be applied on data from one source, and how to extend these methods and enable the extensions to combine information from various data sources has become a hot area of research. Previous multi-view subspace methods aim to learn multiple subspace representation matrices simultaneously and these learning task for different views are treated equally. After obtaining representation matrices, they stack up the learned representation matrices as the common underlying subspace structure. However, for many problems, the importance of sources and the importance of features in one source both can be varied, which makes the previous approaches ineffective. In this paper, we propose a novel method called Robust Auto-weighted Multi-view Subspace Clustering (RAMSC). In our method, the weight for both the sources and features can be learned automatically via utilizing a novel trick and introducing a sparse norm. More importantly, the objective of our method is a common representation matrix which directly reflects the common underlying subspace structure. A new efficient algorithm is derived to solve the formulated objective with rigorous theoretical proof on its convergency. Extensive experimental results on five benchmark multi-view datasets well demonstrate that the proposed method consistently outperforms the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This paper proposes a new support vector machine (SVM) optimization scheme based on an improved chaotic fly optimization algorithm (FOA) with a mutation strategy to simultaneously perform parameter setting turning for the SVM and feature selection. In the improved FOA, the chaotic particle initializes the fruit fly swarm location and replaces the expression of distance for the fruit fly to find the food source. However, the proposed mutation strategy uses two distinct generative mechanisms for new food sources at the osphresis phase, allowing the algorithm procedure to search for the optimal solution in both the whole solution space and within the local solution space containing the fruit fly swarm location. In an evaluation based on a group of ten benchmark problems, the proposed algorithm’s performance is compared with that of other well-known algorithms, and the results support the superiority of the proposed algorithm. Moreover, this algorithm is successfully applied in a SVM to perform both parameter setting turning for the SVM and feature selection to solve real-world classification problems. This method is called chaotic fruit fly optimization algorithm (CIFOA)-SVM and has been shown to be a more robust and effective optimization method than other well-known methods, particularly in terms of solving the medical diagnosis problem and the credit card problem. [ABSTRACT FROM AUTHOR]

Music emotion recognition (MER) field rapidly expanded in the last decade. Many new methods and new audio features are developed to improve the performance of MER algorithms. However, it is very difficult to compare the performance of the new methods because of the data representation diversity and scarcity of publicly available data. In this paper, we address these problems by creating a data set and a benchmark for MER. The data set that we release, a MediaEval Database for Emotional Analysis in Music (DEAM), is the largest available data set of dynamic annotations (valence and arousal annotations for 1,802 songs and song excerpts licensed under Creative Commons with 2Hz time resolution). Using DEAM, we organized the ‘Emotion in Music’ task at MediaEval Multimedia Evaluation Campaign from 2013 to 2015. The benchmark attracted, in total, 21 active teams to participate in the challenge. We analyze the results of the benchmark: the winning algorithms and feature-sets. We also describe the design of the benchmark, the evaluation procedures and the data cleaning and transformations that we suggest. The results from the benchmark suggest that the recurrent neural network based approaches combined with large feature-sets work best for dynamic MER. [ABSTRACT FROM AUTHOR]

In the sparse representation model, the design of overcomplete dictionaries plays a key role for the effectiveness and applicability in different domains. Recent research has produced several dictionary learning approaches, being proven that dictionaries learnt by data examples significantly outperform structured ones, e.g. wavelet transforms. In this context, learning consists in adapting the dictionary atoms to a set of training signals in order to promote a sparse representation that minimizes the reconstruction error. Finding the best fitting dictionary remains a very difficult task, leaving the question still open. A well-established heuristic method for tackling this problem is an iterative alternating scheme, adopted for instance in the well-known K-SVD algorithm. Essentially, it consists in repeating two stages; the former promotes sparse coding of the training set and the latter adapts the dictionary to reduce the error. In this paper we present R-SVD, a new method that, while maintaining the alternating scheme, adopts the Orthogonal Procrustes analysis to update the dictionary atoms suitably arranged into groups. Comparative experiments on synthetic data prove the effectiveness of R-SVD with respect to well known dictionary learning algorithms such as K-SVD, ILS-DLA and the online method OSDL. Moreover, experiments on natural data such as ECG compression, EEG sparse representation, and image modeling confirm R-SVD’s robustness and wide applicability. [ABSTRACT FROM AUTHOR]

Prediction of memory performance (remembered or forgotten) has various potential applications not only for knowledge learning but also for disease diagnosis. Recently, subsequent memory effects (SMEs)—the statistical differences in electroencephalography (EEG) signals before or during learning between subsequently remembered and forgotten events—have been found. This finding indicates that EEG signals convey the information relevant to memory performance. In this paper, based on SMEs we propose a computational approach to predict memory performance of an event from EEG signals. We devise a convolutional neural network for EEG, called ConvEEGNN, to predict subsequently remembered and forgotten events from EEG recorded during memory process. With the ConvEEGNN, prediction of memory performance can be achieved by integrating two main stages: feature extraction and classification. To verify the proposed approach, we employ an auditory memory task to collect EEG signals from scalp electrodes. For ConvEEGNN, the average prediction accuracy was 72.07% by using EEG data from pre-stimulus and during-stimulus periods, outperforming other approaches. It was observed that signals from pre-stimulus period and those from during-stimulus period had comparable contributions to memory performance. Furthermore, the connection weights of ConvEEGNN network can reveal prominent channels, which are consistent with the distribution of SME studied previously. [ABSTRACT FROM AUTHOR]

Early childhood anxiety disorders are common, impairing, and predictive of anxiety and mood disorders later in childhood. Epidemiological studies over the last decade find that the prevalence of impairing anxiety disorders in preschool children ranges from 0.3% to 6.5%. Yet, less than 15% of young children with an impairing anxiety disorder receive a mental health evaluation or treatment. One possible reason for the low rate of care for anxious preschoolers is the lack of affordable, timely, reliable and valid tools for identifying young children with clinically significant anxiety. Diagnostic interviews assessing psychopathology in young children require intensive training, take hours to administer and code, and are not available for use outside of research settings. The Preschool Age Psychiatric Assessment (PAPA) is a reliable and valid structured diagnostic parent-report interview for assessing psychopathology, including anxiety disorders, in 2 to 5 year old children. In this paper, we apply machine-learning tools to already collected PAPA data from two large community studies to identify sub-sets of PAPA items that could be developed into an efficient, reliable, and valid screening tool to assess a young child’s risk for an anxiety disorder. Using machine learning, we were able to decrease by an order of magnitude the number of items needed to identify a child who is at risk for an anxiety disorder with an accuracy of over 96% for both generalized anxiety disorder (GAD) and separation anxiety disorder (SAD). Additionally, rather than considering GAD or SAD as discrete/binary entities, we present a continuous risk score representing the child’s risk of meeting criteria for GAD or SAD. Identification of a short question-set that assesses risk for an anxiety disorder could be a first step toward development and validation of a relatively short screening tool feasible for use in pediatric clinics and daycare/preschool settings. [ABSTRACT FROM AUTHOR]

The remaining useful life (RUL) prediction of Lithium-ion batteries is closely related to the capacity degeneration trajectories. Due to the self-charging and the capacity regeneration, the trajectories have the property of multimodality. Traditional prediction models such as the support vector machines (SVM) or the Gaussian Process regression (GPR) cannot accurately characterize this multimodality. This paper proposes a novel RUL prediction method based on the Gaussian Process Mixture (GPM). It can process multimodality by fitting different segments of trajectories with different GPR models separately, such that the tiny differences among these segments can be revealed. The method is demonstrated to be effective for prediction by the excellent predictive result of the experiments on the two commercial and chargeable Type 1850 Lithium-ion batteries, provided by NASA. The performance comparison among the models illustrates that the GPM is more accurate than the SVM and the GPR. In addition, GPM can yield the predictive confidence interval, which makes the prediction more reliable than that of traditional models. [ABSTRACT FROM AUTHOR]

Coping with scarcity of labeled data is a common problem in sound classification tasks. Approaches for classifying sounds are commonly based on supervised learning algorithms, which require labeled data which is often scarce and leads to models that do not generalize well. In this paper, we make an efficient combination of confidence-based Active Learning and Self-Training with the aim of minimizing the need for human annotation for sound classification model training. The proposed method pre-processes the instances that are ready for labeling by calculating their classifier confidence scores, and then delivers the candidates with lower scores to human annotators, and those with high scores are automatically labeled by the machine. We demonstrate the feasibility and efficacy of this method in two practical scenarios: pool-based and stream-based processing. Extensive experimental results indicate that our approach requires significantly less labeled instances to reach the same performance in both scenarios compared to Passive Learning, Active Learning and Self-Training. A reduction of 52.2% in human labeled instances is achieved in both of the pool-based and stream-based scenarios on a sound classification task considering 16,930 sound instances. [ABSTRACT FROM AUTHOR]