Search

The utilization of osmosis for engineered applications sparked off various emerging technologies relying on osmotically driven membrane processes (ODMPs). Represented by forward osmosis (FO) and pressure retarded osmosis (PRO), ODMPs show great promise to leverage the global water-energy nexus and have drawn considerable attention in recent years. However, their performance in practical applications is significantly affected by membrane fouling. Membrane fouling is a complex problem and is associated with the foulant deposition, concentration polarization and reverse solute diffusion (RSD) in ODMPs. The current paper provides a comprehensive review on membrane fouling in ODMPs with a focus on the elaboration of the factors and mechanisms governing the fouling behavior. Among those fouling factors and mechanisms, some are also applicable for pressure-driven membrane processes (e.g., reverse osmosis (RO) and nanofiltration (NF)), such as the effects of hydrodynamic conditions, feedwater composition, and membrane material and properties, and the cake-enhanced concentration polarization (CE-CP) mechanism. Others are unique for ODMPs, such as the effects of draw solution composition and membrane orientation, the internal concentration polarization (ICP) self-compensation effect, and the RSD-enhanced fouling. A general osmotic-resistance filtration model for ODMPs is presented in this paper to assist in the interpretation of the intrinsic interrelationships among those fouling factors and mechanisms. The impact and mechanisms of membrane fouling on contaminates removal are also reviewed briefly based on the limited existing literature on this topic. Finally, the available membrane fouling control strategies for ODMPs are summarized upon understanding the cause and effect of fouling. Based on the current review, future research prospects are proposed for further studying the membrane fouling in ODMPs. [ABSTRACT FROM AUTHOR]

Abstract: The forward osmosis membrane bioreactor (FOMBR) has received much attention recently. Due to the high rejection nature of FO membranes, the biomass, dissolved organic and inorganic compounds retained in the bioreactor could cause membrane fouling by multiple mechanisms. In this study, a 45% permeate flux decrease was observed in a well controlled FOMBR equipped with a submerged hollow fiber FO membrane module with the active layer facing the draw solution (AL-DS) configuration. A series of characterizations were performed to explore membrane fouling mechanisms in the FOMBR. It was found that a biofouling layer covered the substrate surface of the FO membrane with a combined structure of bacterial clusters and extracellular polymeric substances (EPS), which contributed to 72% drop of the membrane mass transfer coefficient (K m ) and around 10% increase in the hydraulic resistance. The inorganic fouling was caused by Ca, Mg, Al, Si, Fe and P that contributed 60% of the total hydraulic resistance of the fouled membrane and decreased the K m by around 34%. These results suggest that in this application the FO fouling is governed by the coupled influences of biofilm formation and inorganic scaling. When the configuration was reversed with the active layer facing the feed solution (AL-FS), a negligible flux decline was obtained by applying intermittent tap water flushing to the membrane surface, which suggests that the AL-FS orientation is favorable for FOMBR operation. An effective strategy for fouling control is to prevent internal scaling and the over-growth of biofilm on the membrane surface. [Copyright &y& Elsevier]

Abstract: There has been an increasing interest in the novel integration of forward osmosis (FO) and biological process known as the osmotic membrane bioreactor (OMBR). However, little operating experience is available to adequately assess the feasibility of the technology for larger scale application. The goal of this study is to provide fundamental information on the technology. In this study, an OMBR system was continuously operated for 73days. It was found that the high retention property of the FO membrane and salt transmission from the draw solution resulted in increasing mixed liquor salinity until a stable state was reached. In spite of the elevated salinity, the water flux was relatively stable at around 3Lm−2 h−1. Post-experiment analyses indicated mild membrane fouling, and its effect on water permeability was insignificant. An ion analysis check indicated that scaling did not occur. The SEM examination detected a thin gel-like secondary layer on the membrane surface. It was deduced that this secondary layer could have an influencing role on salt transmission during the experiment, and moderated salt concentration in the bioreactor. [Copyright &y& Elsevier]

Abstract: Forward osmosis (FO) is attracting increasing interest for its potential applications in water and wastewater treatment and desalination. One of the major drawbacks of FO is internal concentration polarization (ICP), which significantly limits the FO flux efficiency. In addition, FO membrane flux can be adversely affected by membrane fouling. The effects of ICP and fouling on FO flux behavior were systematically investigated in the current study. Both theoretical model and experimental results demonstrated that the FO flux was highly non-linear with respect to the apparent driving force (the concentration difference between the draw solution and the feed water) as a result of ICP. ICP played a dominant role on FO flux behavior at greater draw solution concentrations and/or greater membrane fluxes due to the exponential dependence of ICP on flux level. Compared to the active layer facing draw solution (AL-facing-DS) configuration, more severe ICP was observed when the membrane active layer faced the feed water (AL-facing-FW) as a result of dilutive ICP in the FO support layer. Interestingly, the AL-facing-FW configuration showed remarkable flux stability against both dilution of the bulk draw solution and membrane fouling. In this configuration, any attempt to reduce membrane flux was compensated by a reduced level of ICP. The net result was only a marginal flux reduction. In addition, foulant deposition was insignificant in this configuration. Thus, the AL-facing-FW configuration enjoyed inherently stable flux, however, at the expense of severer initial ICP. In contrast, the AL-facing-DS configuration suffered severe flux reduction as porous membrane support faced the humic acid containing feed water. The flux loss in this configuration was likely due to the combined effects of (1) the internal clogging of the FO support structure as well as (2) the resulting enhanced ICP in the support layer. The latter was caused by reduced porosity and reduced mass transfer coefficient of the support. The pore clogging enhanced ICP mechanism probably played a dominant role in FO flux reduction at higher flux levels. To the authors’ best knowledge, this is the first study to systematically demonstrate the coupled effects of ICP and fouling on the FO flux behavior. [Copyright &y& Elsevier]