Search

In this paper, the slope of the open pit of Dahongshan iron ore mine in Yunnan is taken as the research object, the safety coefficient and settlement values of the slope under natural and rainfall conditions are derived by the finite element software Midas/GTS, and the surface settlement versus time is produced by fusing the InSAR monitoring results of the study area for a whole year to judge the stability of the open pit slope. The results show that the settlement and deformation areas shown by numerical simulation and InSAR monitoring results are consistent; the comparison between InSAR monitoring results and rainfall intensity shows that the cumulative value of slope settlement has a high correlation with heavy rainfall. The safety coefficients of the slopes of the open pit under natural conditions and rainfall conditions are 1.50 and 1.21, the cumulative value of settlement in InSAR monitoring data for one year is 18.4 mm, and no obvious large deformation area is found. The use of numerical simulation combined with InSAR monitoring can realize the analysis of the stability of the slope of the open pit mine. [ABSTRACT FROM AUTHOR]

This study explores the pile-soil interaction mechanism and the optimal use of antislide piles for slope reinforcement based on finite difference numerical modelling. The force and displacement principles of slopes and antislide piles are analysed. The influences of various factors are investigated, such as postpile filling parameters, pile embedding methods, and pile cross-sectional shapes. Numerical modelling is used to determine the optimal layouts of antislide piles for push and traction landslides. The findings indicate that the cohesive force of the fill has a greater influence on the piles and slope than the friction angle and is the primary control factor. Fully buried antislide piles provide a better antisliding effect than semiburied ones. With fully buried piles, the best controlling effect is obtained when the ratio of the length of the pile's free section to the height of the sliding body is approximately 4/5. Moreover, stepped-cross-section piles provide better slope reinforcement than those with rectangular, T-shaped, or trapezoidal cross-sections. In practical applications, end-bearing arches can be utilized as the primary control structures, with friction arches used for secondary control to improve the soil arching effect as much as possible, thereby enhancing the stability of the piles and slope. To control landslides of various thrust forms, antislide piles should be set in the active section, the core sliding section, or both, as required. This paper provides guidance for improving the design of antislide piles. [ABSTRACT FROM AUTHOR]